-
KanexPro
Item# KAN-SP-HDCAT1X4
The KanexPro SP-HDCAT1X4 is a one transmitter and four receiver amplifier set that enables high resolution 1080p HDMI signals to be routed over distances up to 394ft.(120m) significantly beyond the capability of standard HDMI connectivity. When connected together using four economical and installer friendly CAT5e/6 cables, the transmitter inputs the HDMI signal into four identical outputs carrying 394 ft./1080p resolution simultaneously from the provided receivers. For control options the 1x4 splitter...
-
AVPro Edge
Item# AC-FRESCO-DA116
The Fresco large-scale distribution amplifier was engineered to repeat and amplify any HDMI signal you can throw at it. Built to handle full 4K60 (4:4:4) at 18Gbps, the AVPro Edge AC-FRESCO-DA116 amplifies and stabilizes a HDMI signal throughout its 16 HDMI output ports. The slim design makes it easy to mount locally, away from a rack or media center, leaving your clients with a clean finish.
AVPro Edge understands that many installations are running non-stop, 24/7-365. Their engineers...
-
MuxLab Inc
Item# MUX-500427
The HDMI 1x8 Splitter, 4K60 (500427) allows one (1) HDMI 2.0 source to be distributed to up to eight (8) HDMI displays. The splitter supports up to 4K (3840 X 2160) video @ 60Hz, HDR, Deep Color and HD audio. The splitter is HDCP 1.4 & 2.2 compliant and features LED diagnostics. Additionally, all connectors are on the rear panel for neater cabling. Features: Distribute one HDMI 2.0 source to eight displays
Supports up to 4K @ 60Hz (4:4:4)
HDCP 1.4 and 2.2 compliant
Supports HDR and Deep Color
Supports...
-
Gefen Inc
Item# GEF-EXTUHD600-12
Designing systems capable of distributing 4K Ultra High Definition media requires support for the content of today, and headroom for the content of tomorrow. Gefen's EXT-UHD600 Series of splitters take HDMI 2.0 to its highest specification of 4K 60 Hz at 4:4:4 chroma subsampling, along with HDR (High Dynamic Range) support. They go beyond the requirements of typical 4K systems, delivering stunning Ultra HD and DCI/Cinema picture up to 4096 x 2160 pixels at 60 frames per second without subsampling...
-
Gefen Inc
Item# GEF-EXTUHD600-14
Designing systems capable of distributing 4K Ultra High Definition media requires support for the content of today, and headroom for the content of tomorrow. Gefen's EXT-UHD600 Series of splitters take HDMI 2.0 to its highest specification of 4K 60 Hz at 4:4:4 chroma subsampling, along with HDR (High Dynamic Range) support. They go beyond the requirements of typical 4K systems, delivering stunning Ultra HD and DCI/Cinema picture up to 4096 x 2160 pixels at 60 frames per second without subsampling...
-
Magenta Research
Item# MGE-MG-DA-612
The Magenta Research MG-DA-612 series of ultra-slim HDMI 2.0 Splitters and Distribution Amplifiers provide a high-performance solution for distributing HDMI signals with video output up to
[email protected] (YUV444) resolutions and HDR (High Dynamic Range Imaging) support, which gives the most life like video experience. Support is also offered for up to 32 audio channels with sampling rates up to 192kHz and passthrough of 7.1 channels of digital audio including high resolution digital audio formats...
-
Kramer
Item# KR-VM-4H2
The Kramer VM-4H2 is a 1:4 distribution amplifier for up to 4K HDR, HDMI signals that comply with HDCP 2.2 content protection standard. The unit takes one HDMI input, equalizes and reclocks the signal and distributes it to four identical outputs.
Perfect for:
Simple distribution of high-resolution 4K signals in corporate, education, hospitality and government market segments.
Features: Max. Data Rate - 17.82Gbps (5.94Gbps per graphic channel).
Max. Resolution...
-
KanexPro
Item# KAN-SP-HD1X24K
The KanexPro 1x2 HDMI Splitter is a
[email protected] compliant distribution amplifier which lets you duplicate one HDMI source to 2 displays without losing signal integrity and resolution.
The Ultra HD 4K format on the HDMI splitter ensures astounding picture quality, four times the resolution of high-definition 1080p at 30 Hz. This HDCP compliant splitter is also backward compatible with previous HDMI revisions, supporting 1080p / 720p HDMI video resolution devices. Even if you don't require 4K video...
-
ATEN
Item# ATEN-VS184A
The VS184A 4K HDMI Splitter is the perfect solution for anyone who needs to send one source of digital high definition video to four displays at the same time. It supports all HDMI-enabled equipment, such as DVD players, satellite set-top boxes and all HDMI displays.
The VS184A HDMI Splitter is HDCP (High Bandwidth Digital Content Protection) compliant, making it effective for use with all HDMI displays in home theater applications, as well as in corporate, educational and commercial settings.
...
-
Gefen Inc
Item# GEF-EXTUHD600-18
Designing systems capable of distributing 4K Ultra High Definition media requires support for the content of today, and headroom for the content of tomorrow. Gefen's EXT-UHD600 Series of splitters take HDMI 2.0 to its highest specification of 4K 60 Hz at 4:4:4 chroma subsampling, along with HDR (High Dynamic Range) support. They go beyond the requirements of typical 4K systems, delivering stunning Ultra HD and DCI/Cinema picture up to 4096 x 2160 pixels at 60 frames per second without subsampling...
-
Ocean Matrix
Item# OMX-HDMI-1X2-4K2
A compact 1x2 HDMI splitter / distribution amplifier to send a single 4K HDMI signal from cameras, set top boxes, Blu-ray players and digital signage players simultaneously to two (2) HDMI displays, projectors, extenders or other HDMI enabled devices.
The Ocean Matrix OMX-HDMI-1X2-4K2 supports HDR and resolutions up to 4K/UHD (4096 x 2160) but also works with HD & SD signals without loss while maintaining the highest standards. The unit also meets all standards for HDMI 2.0 and HDCP 2.2 specifications...
-
Theatrixx Technologies Inc
Item# TTX-TXVV-HDMIDA
Professional equipment in mission-critical applications is all about reliability and confidence. So Theatrixx started with a clean sheet, and built what might soon become your most trustworthy piece of equipment. Introducing the Theatrixx TXVV-HDMIDA - world's first video converter truly designed for the road. Video converters nowadays are used everywhere on profesionnal A/V events, presentations, live shows and tours and often have a critical role. Yet, they are often the weakest link in...
Our Price: $399.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
KanexPro
Item# KAN-SP-1X2SL18G
4 Options AvailableThe KanexPro SP-1X2SL18G is an UltraSlim 1x2 DA designed to split one HDMI source to two 4K UHD displays supporting 4:4:4 YUV color space with HDR and 4K/60. With the super bandwidth of 18 Gbps, this 1x2 splitter can be used typically with displays and projectors supporting the latest HDMI 2.0 and HDCP 2.2 for ultimate reproduction of the video signal without any loss and attenuation.
Features: UltraSlim 1x2 HDMI DA with 4K UHD resolutions
Supports 1080p/60 & 4K/60Hz resolutions
Supports...
Read More
-
Kramer
Item# KR-VM-2H2
The Kramer VM-2H2 is a 1:2 distribution amplifier for up to 4K HDR, HDMI signals that comply with HDCP 2.2 content protection standard. The unit takes one HDMI input, equalizes and reclocks the signal and distributes it to two identical outputs.
Perfect for:
Simple distribution of high-resolution 4K signals in corporate, education, hospitality and government market segments
Features: Max. Data Rate - 17.82Gbps (5.94Gbps per graphic channel).
Max. Resolution -
[email protected]
-
Blustream
Item# BLU-SP14AB-V2
The Blustream SP14AB-V2 4K HDMI 2.0 splitter distributes a single HDMI source to four simultaneous outputs. The splitter supports full HDMI 2.0 and HDCP2.2 with video resolutions up to and including 4K @ 60Hz 4:4:4 Features: Features 1 x HDMI input that is replicated to 4 x HDMI outputs
Supports HDMI 2.0 18 Gbps specification including HDR
Supports up to 4K UHD 60Hz 4:4:4
Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
Supports all known HDMI audio formats...
-
Gefen Inc
Item# GEF-HD4K2K144C-B
The Gefen GTB-HD4K2K-144C routes one Ultra HD source to four 4K Ultra HD displays. This HDCPcompliant product has been specifically designed to support multiple layers of splitting/cascading for flawless performance in large video distribution and signage applications, supporting hundreds of displays. Resolutions supported include 4K Ultra HD (3860 x 2160 at 60 Hz, 4:2:0 color space), 4K DCI (4096 x 2160 at 24 and 34 Hz), 1080p Full HD, and 1920x1200 (WUXGA). Deep Color, 3D, and multichannel digital...
Our Price: $281.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Apantac
Item# APA-HDMI-1X2-II
HDMI 1.3a compliant
HDCP compliant
Supports 480i, 480p, 720p, 1080i, 1080p up to 1920x1200
Supports deep color up to 12 bits
Magnetic Mount
Features: HDMI 1.3a compliant
HDCP compliant
Supports 480i, 480p, 720p, 1080i, 1080p up to 1920x1200
Supports deep color up to 12 bits
Magnetic Mount
-
KanexPro
Item# KAN-SP-HD1X44K
The KanexPro SP-HD1X44K 1x4 HDMI Splitter is a
[email protected] compliant distribution amplifier lets you duplicate one HDMI source to four displays without losing signal integrity and resolution.
The Ultra HD 4K format on the HDMI splitter ensures astounding picture quality, four times the resolution of high-definition 1080p. This HDCP compliant splitter is also backward compatible with previous HDMI revisions, supporting 1080p / 720p HDMI video resolution devices. Even if you don't...
-
Calrad Electronics
Item# CLRD-40-1063-HS2
The Calrad 40-1063-HS-2 accepts Ultra HD 4Kx2K HDMI video sources and splits the signal to two Ultra HD displays simultaneously, without loss of quality or resolution. Works with all compatible 4Kx2K HDMI baluns. Not only does it come in a Metal case but is has two L.E.D. signal indicators illuminate when HDMI signal connectivity is working on each output. Now with selectable EDID settings you can view your source instantly without hand-shaking delays. Specifications: Connectors:...
-
Miranda Technologies
Item# MIR-HAD185N-3SRP
The Miranda Technologies HDA-185N/186N-3SRP Single Rear Connector Panel with 7 Outputs is designed to be used with the HDA-1861 reclocked HD/SD SDI DA Densite card with automatic equalization for Densite 2 frame housing. The HDA-185N/186N-3SRP connector panel features 1 HD-SDI input and 7 HD-SDI outputs.
-
AVPro Edge
Item# AC-DA12-AUHD
The AC-DA12-AUHD is a part of the first true 18Gbps distribution amplifier family. (Others in this family are the AC-DA14-AUHD and the AC-DA18-AUHD) This product is ideal on all applications where stable distribution is key. These distribution amplifiers can be cascaded for extended distances and additional outputs.
Full 18Gbps and HDR support ensures military-grade stability even at the highest of bandwidths. To see the difference, install a distribution amplifier in you next...
-
AVPro Edge
Item# AC-DA14-AUHD
The AC-DA14-AUHD is a part of the first true 18Gbps distribution amplifier family. (Others in this family are the AC-DA14-AUHD and the AC-DA18-AUHD) This product is ideal on all applications where stable distribtion is key. These distribution amplifiers can be cascaded for extended distances and additional outputs.
Full 18Gbps and HDR support ensures military grade stability even at the highest of bandwidths. Install the distribution amplifier with confidence in your next bar,...
-
AVPro Edge
Item# AC-DA18-AUHD
The AC-DA18-AUHD is in the first true 18Gbps distribution amplifier family. This products is ideal on all applications where stable distribution is key. These distribution amplifiers can be cascaded for extended distances and and additional outputs.
Full 18Gbps and HDR support ensures military grade stability even at the highest of bandwidths. Install the distribution amplifier with confidence in your next bar, restaurant, digital signage, commercial or residential install and...
-
AVPro Edge
Item# AC-DA210-HDBT
The AC-DA210-HDBT is designed for massive distributions over extreme distances. Using tried and true HDBaseT Technology, this distribution amplifier has simplified long distance distribution while giving the end points undisturbed HD and UHD images.
Simplicity and "Plug & Play" are focal points of this unit. With RS-232 and IR you can manage your end points as well for things like "Power On" or "Power Off". Additionally, these have two switchable inputs making for more robust systems....
-
AVPro Edge
Item# AC-DA210-HDBT-KI
The AC-DA210-HDBT is designed for massive distributions over extreme distances. Using tried and true HDBaseT Technology, this distribution amplifier has simplified long distance distribution while giving the end points undisturbed HD and UHD images.
Simplicity and "Plug & Play" are focal points of this unit. With RS-232 and IR you can manage your end points as well for things like "Power On" or "Power Off". Additionally, these have two switchable inputs making for more robust...
