Narrow Results:

• 

  KanexPro SP-HDCAT1X8 - 1x8 HDMI Distribution Amplifier Kit

  The KanexPro SP-HDCAT1X8 is a one transmitter and eight extenders - receiver set that enables high resolution 1080p HDMI signals to be routed over distances up to 394ft.(120m) significantly beyond the capability of standard HDMI connectivity. When connected using installer friendly CAT5e/6 cables, the transmitter inputs the HDMI signal into eight identical outputs carrying 394 ft./1080p resolution simultaneously from the provided receivers. For control options the 1x8 splitter comes...

   

  Read More

  Item #: KAN-SP-HDCAT1X8

  Availability: In Stock

  Our Price: $1,099.00

  Add to Wishlist
• 

  KanexPro EXT-AVIPH264RX NetworkAV H.264 HDMI Receiver over IP with POE & RS-232

  The KanexPro EXT-AVIPH264RX is a DHCP enabled AV over IP receiver with HDMI output to display and Ethernet. This receiver over IP uses advanced H.264 compression algorithm to transmit full HD 1080p from HDMI based displays with less bandwidth over LAN network. It supports PoE (power over Ethernet) with distances over a single CATx up to 394 ft. (120m) delivering one to one, one to many and many to many over the Ethernet switch. Applications:Ideal for digital signage and networked...

   

  Read More

  Item #: KAN-EXTAVIP264RX

  Availability: Usually ships in 3-10 business days

  Our Price: $199.00

  Add to Wishlist
• 

  KanexPro SP-1X2SL18G UltraSlim 18G 4K HDMI 2-Port Distribution Amplifier

  The KanexPro SP-1X2SL18G is an UltraSlim 1x2 DA designed to split one HDMI source to two 4K UHD displays supporting 4:4:4 YUV color space with HDR and 4K/60. With the super bandwidth of 18 Gbps, this 1x2 splitter can be used typically with displays and projectors supporting the latest HDMI 2.0 and HDCP 2.2 for ultimate reproduction of the video signal without any loss and attenuation. Features: UltraSlim 1x2 HDMI DA with 4K UHD resolutions Supports 1080p/60 & 4K/60Hz resolutions Supports YUC 4:4:4...

   

  Read More

  Item #: KAN-SP-1X2SL18G

  Availability: In Stock

  Our Price: $119.00

  Add to Wishlist
• 

  KanexPro EXT-AVIPH264TX NetworkAV H.264 HDMI Transmitter over IP with POE & RS-232

  The KanexPro EXT-AVIPH264TX is an AV over IP transmitter with an HDMI input and Ethernet out which uses advanced H.264 compression algorithm to transmit full HD 1080p from HDMI based sources with less bandwidth over LAN network. It supports PoE (power over Ethernet) with distances over a single CATx up to 394 ft. (120m) delivering one to one, one to many and many to many over the Ethernet switch. Applications: Ideal for digital signage and networked AV applications where full...

   

  Read More

  Item #: KAN-EXTAVIP264TX

  Availability: Usually ships in 3-10 business days

  Our Price: $258.00

  Add to Wishlist
• 

  KanexPro SDI-HDRPTPRO SDI Repeater

  The KanexPro 3G/SDI/HD-SDI Repeater is designed for extending AV signals at longer runs up to 300 meters using single RG6 cable. It also embeds audio up to 7.1 channels passing ancillary data. Perfect for surveillance systems, rental & staging facilities, post-production, TV studio, digital cinema, or other A/V applications. Features: Extend and repeat SDI signals up to 300 meters Auto-input detection for 3G/HD/SD-SDI Supports full HD 1080p/60 Built-in signal equalizer & re-clock function 3G...

   

  Read More

  Item #: KAN-SDI-HDRPTPRO

  Availability: In Stock

  Our Price: $109.00

  Add to Wishlist
• 

  KanexPro EXT-HD60M HDMI Extender Over CAT6 up to 196ft. (60m)

  The KanexPro HD-EXT60M is a compact HDMI Extender with local HDMI output designed to carry DVI/ HDMI signals over distances beyond the capability of standard HDMI/ DVI cable. It extends video and audio over a single CAT6 cable up to 196ft. (60m) and is compliant with HDCP and EDID to enhance Deep Color and optimal resolutions up to HD 1080p/60. In addition, the extender provides auto-adjustment, buffering and signal equalization to maintain pixel-perfect resolution up to HD 1080p/60 on a single...

   

  Read More

  Item #: KAN-EXT-HD60M

  Availability: In Stock

  Our Price: $91.42

  Add to Wishlist
• 

  KanexPro EXT-HDBT70C KanexPro 4k/30Hz HDMI Extender Over HDBaseT - 230 Feet & PoC

  The KanexPro EXT-HDBT70C is an HDCP 2.2 compliant extender set consisting of a transmitter and receiver. It uses HDBaseT technology to transmit uncompressed, high-resolution 1080p/4K signals from transmitter to the receiver via a CAT5e/CAT6a cable at a distance of up to 70/40m. Moreover, the extender set supports PoC (power over cable) from either side of the sender or receiver, CEC, bi- directional RS232 & IR control. Applications Perfect for home and residential...

   

  Read More

  Item #: KAN-EXT-HDBT70C

  Availability: Usually ships in 3-10 business days

  Our Price: $225.00

  Add to Wishlist
• 

  KanexPro HDEXT50M Extends HD Signals over Single CAT 5e/6 up to 165ft (50m)

  The KanexPro one input over one output HDMI Extender is designed to carry DVI/ HDMI signals over distances beyond the capability of standard HDMI/ DVI cable. It extends video and audio over a single CAT5e/6 cable up to 165ft. (50m) and is compliant with EDID. In addition, the extender provides auto-adjustment, buffering and signal equalization to maintain pixel-perfect resolution up to HD 1080p/60. Ideal for relocating your source such as a Blu-ray player or a satellite box to a remotely located...

   

  Read More

  Item #: KAN-HDEXT50M

  Availability: In Stock

  Our Price: $79.00

  Add to Wishlist
• 

  KanexPro SP-HD1X24K 1X2 HDMI Splitter with 4K Cinema Resolutions

  The KanexPro 1x2 HDMI Splitter is a [email protected] compliant distribution amplifier which lets you duplicate one HDMI source to 2 displays without losing signal integrity and resolution. The Ultra HD 4K format on the HDMI splitter ensures astounding picture quality, four times the resolution of high-definition 1080p at 30 Hz. This HDCP compliant splitter is also backward compatible with previous HDMI revisions, supporting 1080p / 720p HDMI video resolution devices. Even if you don't require 4K video...

   

  Read More

  Item #: KAN-SP-HD1X24K

  Availability: In Stock

  Our Price: $37.99

  Add to Wishlist
• 

  KanexPro VGAEXTX1 1x1 VGA w/Audio CAT5 Extender System (Trans & Rec)

  The KanexPro VGA extender over a single CAT5e/6 cable is designed for routing high-resolution VGA signals and stereo audio over remote distances up to 1,000ft. (300m). Each receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew over long distances. The 15-pin HD connectors are convenient and cost-effective for all input/ output connections supporting full bandwidth compatible from VGA to WUXGA graphics card resolutions and HDTVÕs to projectors. In...

   

  Read More

  Item #: KAN-VGAEXTX1

  Availability: In Stock

  Our Price: $86.99

  Add to Wishlist
• 

  KanexPro SP-HD1X44K 1x4 HDMI Splitter with 4K Cinema Resolutions & EDID Selector

  The KanexPro 1x4 HDMI Splitter is a [email protected] compliant distribution amplifier lets you duplicate one HDMI source to four displays without losing signal integrity and resolution. The Ultra HD 4K format on the HDMI splitter ensures astounding picture quality, four times the resolution of high-definition 1080p. This HDCP compliant splitter is also backward compatible with previous HDMI revisions, supporting 1080p / 720p HDMI video resolution devices. Even if you don't require 4K video today, it ensures...

   

  Read More

  Item #: KAN-SP-HD1X44K

  Availability: In Stock

  Our Price: $64.99

  Add to Wishlist
• 

  KanexPro AP3DBL Mini 3-input Audio Amplifier with Mic Mixer

  The KanexPro AP3DBL is a 3-Input 40-Watt audio amplifier supporting 70V or 100V. It comprises of 3 switchable inputs (RCA, 3.5mm and TOSLINK) for quick switching and sound reproduction. The audio amplifier supports MIC mixing and EQ control perfect for classrooms, conference rooms, lecture halls and restaurants. Note: The unit includes IR remote & sensor. Features: Fast switching 3 audio inputs (1 digital, 2 analog) One 3-level MIC input with mixer function 40 Watt amplifier output at 70V or 100V Ducking...

   

  Read More

  Item #: KAN-AP3DBL

  Availability: Usually ships in 3-10 business days

  Our Price: $279.95

  Add to Wishlist
• 

  KanexPro HDSC61D-4K 6-Input Collaboration Switcher & Scaler with 4K HDMI Output

  The KanexPro HDSC61D-4K is a 4-input HDMI, and 2-input VGA collaboration scaler ideal for switching up to six AV sources to one HDMI display. This switcher scaler also supports 4K resolutions up to 15 meters to match the latest display standards and performs a feature known as" Output Blacking" to mute the audio and video when switching between different sources, perfect for corporate boardrooms or small huddle rooms where HDMI, DisplayPort or VGA switching is needed to one display. This 6-Input...

   

  Read More

  Item #: KAN-HDSC61D-4K

  Availability: In Stock

  Our Price: $449.00

  Add to Wishlist
• 

  KanexPro HD25FTCL314 25ft High-Resolution HDMI Cable with Built-in Signal Booster

  The KanexPro High Speed HDMI cables with Ethernet are designed with built-in booster for applications that require high-performance transmission of HDMI digital video and multi-channel audio signals. These cables have active amplification built-in to prevent impedance mismatch, caused by the cable attenuation, dielectric losses and compensation for skin effect over long distances. For flawless transmission, the output of the cable is placed at the end of the display to amplify full signal transmission...

   

  4 Lengths Available

  Item #: KAN-HD25FTCL314

  Availability: In Stock

  Our Price: $31.95

  Add to Wishlist
• 

  KanexPro EXT-HDBT150M HDMI 150m Extender Over HDBaseT with Loop Out

  The KanexPro EXT-HDBT150M is a transmitter - receiver set which enables you to extend 1080p/60 HD signals up to 492 feet (150 meters) over single CAT6 cable using HDBaseT Technology. It supports HDCP 1.4 with EDID pass-through.The extender supports PoE (power over Ethernet) requiring you to power from either the sender or receiver side. Locking power supplies gives you the utmost flexibility and secures HDMI cables in place to eliminate intermittent signal loss or disconnected HDMI...

   

  Read More

  Item #: KAN-EXT-HDBT150M

  Availability: Usually ships in 3-10 business days

  Our Price: $399.95

  Add to Wishlist
• 

  KanexPro SP-SDIX2 3G/HD-SDI 1x2 Splitter Distribute 1 SDI Signal to 2 SDI Monitors

  The KanexPro 1x2 SDI unit can split, re-clock, and amplify SDI source video to 2 SDI outputs providing full HD 1080p resolution to up to 2 displays simultaneously for faster broadcasting and production. The splitter accepts one SDI input from the SD-SDI, HD-SDI, or 3G-SDI video source such as VTR, SDI recorders and other sources. After replicating the signal perfectly, it automatically deploys cable equalization to simultaneously transmit SDI signals as far as 1000 feet (300 m) over 8 x BNC coax...

   

  Read More

  Item #: KAN-SP-SDIX2

  Availability: In Stock

  Our Price: $118.00

  Add to Wishlist
• 

  KanexPro EXT-SDHDX 3G-SDI to HDMI Converter

  The KanexPro SDI to HDMI converter is an inexpensive version for our SDI customers looking to simply convert SDI signals to HDMI. It supports SDI, 3G-SDI & HD-SDI to an HD display or any monitor equipped with an HDMI jack. It supports signal re-clocking and equalization for longer SDI runs ideal for broadcasting and house of worship centers. Perfect for broadcast monitoring to HDMI displays. It will save you a ton of money compared to buying special monitors with the capability to purchase an...

   

  Read More

  Item #: KAN-EXT-SDHDX

  Availability: In Stock

  Our Price: $69.91

  Add to Wishlist
• 

  KanexPro HAECOAX3 UltraHD 4K Audio De-Embedder

  The KanexPro HAECOAX3 3rd gen. audio extractor is designed with 18 Gbps of high bandwidth and supporting the latest HDMI 2.0 specifications. This audio extractor will de-embed HDMI audio streams from any HDMI based device to digital or analog stereo maintaining 4K/60 video resolutions with YUV 4:4:4 color space and pass-thru for HDR 10(High Dynamic Range). Audio formats include LCPM 2-channel stereo, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master audio with audio sampling rate up...

   

  Read More

  Item #: KAN-HAECOAX3

  Availability: In Stock

  Our Price: $91.42

  Add to Wishlist
• 

  KanexPro HDSP164K 4K HDMI 16-Port Distribution Amplifier

  The KanexPro 1x16 HDMI Distribution Amplifier is an installer-friendly, lightweight HDMI splitter that distributes one HDMI input into sixteen identical outputs supporting uncompressed 4K UHD resolutions. The conforming outputs also have the ability of buffering and amplifying all the HDMI signals. It can achieve long distance transmission of HDMI signals up to 50 feet (15 meters) or can be combined with our HDBaseT Extenders to route distances up to 330 feet (100 meters). It accepts computer resolutions...

   

  Read More

  Item #: KAN-HDSP164K

  Availability: In Stock

  Our Price: $269.00

  Add to Wishlist
• 

  KanexPro SW-4X1SL18G UltraSlim 4K HDMI 4x1 Switcher with 4:4:4 Color Space & 18G

  The KanexPro SW-4X1SL18G is an UltraSlim auto-switcher with 4–input and 1-output which auto-identifies input resolutions of up to four HDMI devices to one 4K display supporting full 4:4:4 YUV color space and 18 Gbps of bandwidth.This switcher can be controlled from the front panel, IR Remote, or by sending RS-232 commands, the corresponding indicator will illuminate to show real-time switching status. It can transmit uncompressed [email protected] 4:4:4 (at max) signal and supports HDMI...

   

  Read More

  Item #: KAN-SW-4X1SL18G

  Availability: In Stock

  Our Price: $249.00

  Add to Wishlist
• 

  KanexPro SP-HD20-1x44K 4K HDMI 1x4 Splitter with HDCP2.2 1x4 HDMI DA with HDCP2.2 4K Cinema Resolutions & Smart EDID

  The KanexPro SP-HD20-1X44K is an one input, four output HDMI Distribution Amplifier engineered to split 4K quality videos or high res images from one source to four HD 4K displays with resolutions up to [email protected] and HDCP2.2 specifications. Built-in EDID management allows optimal resolution to be selected and properly outputted to avoid response time and delays. The conforming outputs also have the ability of buffering and amplifying all the HDMI signals. It can achieve long distance transmission...

   

  Read More

  Item #: KAN-SPHD201X44K

  Availability: In Stock

  Our Price: $81.40

  Add to Wishlist
• 

  KanexPro SP-1X4SL18G UltraSlim 18G 4K HDMI 4-Port Distribution Amplifier

  The KanexPro SP-1X4SL18G is an UltraSlim 1x4 DA designed to split one HDMI source to four 4K UHD displays supporting 4:4:4 YUV color space with HDR10. With the super bandwidth of 18 Gbps, this 1x4 splitter can be used typically with displays and projectors supporting the latest HDMI 2.0 and HDCP 2.2 for ultimate reproduction of the video signal without any loss and attenuation. Features: UltraSlim 1x4 HDMI DA with 4K UHD resolutions Supports 1080p/60 & 4K/60Hz resolutions Supports YUC 4:4:4 color...

   

  Read More

  Item #: KAN-SP-1X4SL18G

  Availability: Usually ships in 3-10 business days

  Our Price: $189.00

  Add to Wishlist
• 

  KanexPro SDI-HDSDXPRO HDMI to SDI Converter

  The KanexPro next generation of HDMI to SDI converters are designed for converting single -HDMI signal into two 3G-SDI, HD-SDI signals in professional applications involving broadcasting, post -production and filming. It auto detects input signals converting the output resolution to correct format. Perfect for broadcasting from HDMI sources such as HDMI cameras and laptops to SDI displays. Used in surveillance systems, rental & staging facilities, post-production, TV studio, digital cinema, or...

   

  Read More

  Item #: KAN-SDI-HDSDXPRO

  Availability: In Stock

  Our Price: $139.95

  Add to Wishlist
• 

  KanexPro VGAEXTX2 1x2 VGA w/Audio Splitter / CAT5 Extender System (Trans & 2-Rec)

  The KanexPro 1x2 VGA extender over CAT5e/6 cable is designed for routing two high-resolution VGA signals and stereo audio over remote distances up to 1,000ft. (300m). Each receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew over long distances. The 15-pin HD connectors are convenient and cost-effective for all input/ output connections supporting full bandwidth compatible from VGA to WUXGA graphics card resolutions and HDTV’s to projectors. In...

   

  Read More

  Item #: KAN-VGAEXTX2

  Availability: Usually ships in 3-10 business days

  Our Price: $119.00

  Add to Wishlist
• 

  KanexPro EXT-SDIVGA 3G/HD-SDI/ SDI to VGA Converter

  The KanexPro SDI to VGA Converter allows SDI, HD-SDI and 3G-SDI signals to be displayed on a VGA monitor or a projector ensuring high bit-rates up to 3 Gbps for faster signal transmission without loss in broadcasting quality signals. It provides scaling and signal re-clocking functions for optimal resolution and longer length transmission up to 200 meters for HD signals and 300 meters for SD formats. The SDI converter also features a loop-through SDI output for local monitor support simultaneously....

   

  Read More

  Item #: KAN-EXT-SDIVGA

  Availability: In Stock

  Our Price: $118.00

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends