MuxLab 500771-TX DVI/USB 2.0 KVM Over IP PoE Extender Transmitter

500771-TX - Overview

• Features:

  • One operator can manage multiple servers/workstations
  • Supports DVI up to 1920x1200 and 1080p @ 60Hz
  • Receiver side includes a 4-port USB hub, for KVM applications
  • Up to 330ft (100m) over Cat5e/6
  • Supports 100's of Transmitters & Receivers depending on network bandwidth
  • Supports multiple point-to-point, and point-to-multipoint applications
  • Supports audio insert & mic-out (TX), and audio extract & mic-in (RX)
   

• Specifications:

  • Environment: DVI 1.0
  • Devices: Computers and servers with DVI monitor ports.
  • Transmission: Transparent to the user
  • Bandwidth: 300MHz
  • Signals: DVI 1.0 protocol, HDCP 1.4
  • Connectors:
    1x DVI receptacle.
    1x RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
    2x 3.5mm jacks for audio insert (on TX)/audio extract (on RX).
    2x 3.5mm jacks for mic-out (on TX)/mic-in (on RX).
    1x 2.1mm locking barrel jack for power
    1x or 4x USB Connector(s) for Host (on TX)/Client (on RX)
    4x DIP Switches for device ID addressing.
    *NOTE: Cables not included.
  • Maximum Distance: Cat5e/6: 330ft (100m) up to 1080p @ 60Hz and 1920x1200 @ 60Hz (Based on a maximum length of 6.6ft (2m) of DVI cable per end)
    *NOTE: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
  • Latency: 1x Frame (16ms) @ 60Hz (typical)
  • Compression: JPEG 2000
  • Network Bit Rate: 300Mbps (typical)
  • Network Requirement: 1000BaseT with PoE
  • RJ45 Pin Configuration - RJ45 Link
    Pin 1 (R) Pin 2 (T)
    Pin 3 (R) Pin 6 (T)
    Pin 4 (R) Pin 5 (T)
    Pin 7 (R) Pin 8 (T)
    *NOTE: Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring.
  • Cable: 1x Cat 5e/6 or better twisted pair cables required
  • Power Source: This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (MUX-500993) may be purchased separately
  • PoE Standard: IEEE 802.3af
  • Power Consumption: Transmitter: Receiver: 2.55Watt
  • Temperature:
    Operating: 32°F - 104°F (0°C - 40°C)
    Storage: -4°F - 185°F (-20°C - 85°C)
  • Humidity: Up to 95% non-condensing
  • Dimensions: 4.40" x 5.08" x 1.00" (112mm x 129mm x 25mm)
  • Weight: 1.5lbs (0.68kg)
  • Compliance Regulatory: FCC, CE, RoHS; Flammability: 94V0
   

• GTIN:

  0627699907719