-
Item# THR-F-2A-TXRX
The Thor Fiber F-2A-TXRX Analog Audio over One Fiber Transmitter and Receiver Kit helps solve sending unbalanced audio over long distances using fiber. The audio fiber optic transmitter, converts analog audio 20hz to 20Khz fiber optic modulated digital stream so it could be transported over single mode or multimode fiber. The optical receiver converts the optical signal back to its orginal analog wave form. Offers very low latency 1ms - so it's perfect for live events, shows, concerts,...
Our Price: $395.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# THR-F-2A-XLR-TRX
The Thor Fiber F-2A-XLR-T/RX XLR audio over fiber units are able to send balanced audio over fiber much further than traditional copper. Our Audio Interface with XLR kit has both a transmitter and receiver unit. The 2 XLR inputs/outputs can be used on a single transmitter unit and sent over fiber to the receiver unit that also has an equal number of XLR outputs. The fiber allows the signal to be sent over a long distance without losing any quality in the signal. The kit is 16-bit digitally...
Our Price: $695.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# THR-F-2A-RCA-TXR
The Thor Fiber F-2A-RCA-TXRX RCA audio over fiber unit is able to send Line Level audio over fiber simply and easily over long distances without using traditional copper wiring. The units vary in size based on the amount of audio's for transmit and receive, from a compact form factor that can be easily bolted down, up to a rackmount 1RU unit for easy access in a rack. The kits are sold in pairs, transmitter and receiver; and can utilize both Singlemode or Multimode fiber. Using fiber allows...
-
Item# THR-1-8XLHFITXRX
The Thor Fiber F-1-8XLR-HIFI-TXRX is a HIFI professional audio optical transceiver with 3-PIN XLR interface, performs high-quality 1~8-ch HIFI audio transmission over an optical line. Fiber Optic Transmitter High Quality audio signals are converted to digital signals and then converted to optical signals for transmission. Fiver Optic Receiver does the photoelectric conversion from modulated light signal to the analog XLR signal output. Used for professional and extremely high quality...
Our Price: $3,995.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# THR-1TEL
The Thor Fiber F-1TEL is used for carrying a phone line over fiber optic cable. Telephone over Fiber applications offer a secure connection that is impossible to bug. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using two of these devices, a telephone line can be extended over a fiber link. The F-1TEL provides full service for features like caller...
-
Item# THR-4TEL
The Thor Fiber F-4TEL is used for carrying four phone lines over fiber optic cable. Telephone over Fiber applications offer a secure connection that is impossible to bug. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using a pair of these devices, four independent telephone lines can be extended over a fiber link. The F-4TEL provides full service for...
-
Item# THR-F-16A-RCATXR
The Thor Fiber F-16A-RCA-TXRX RCA audio over fiber unit is able to send Line Level audio over fiber simply and easily over long distances without using traditional copper wiring. The units vary in size based on the amount of audio's for transmit and receive, from a compact form factor that can be easily bolted down, up to a rackmount 1RU unit for easy access in a rack. The kits are sold in pairs, transmitter and receiver; and can utilize both Singlemode or Multimode fiber. Using fiber allows...
-
Item# THR-F-16A-TXRX
The Thor Fiber F-16A-TXRX Analog Audio over One Fiber Transmitter and Receiver Kit helps solve sending unbalanced audio over long distances using fiber. The audio fiber optic transmitter, converts analog audio 20hz to 20Khz fiber optic modulated digital stream so it could be transported over single mode or multimode fiber. The optical receiver converts the optical signal back to its orginal analog wave form. Offers very low latency 1ms - so it's perfect for live events, shows, concerts,...
Our Price: $1,249.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# THR-F-16A-XLR-TX
The Thor Fiber F-16A-XLR-TXRX XLR audio over fiber unit is able to send balanced audio over fiber much further than traditional copper. Thor Fiber's Audio Interface with XLR kit has both a transmitter and receiver unit. Available options are for 2, 4, 8, 16 or 32 XLR inputs/outputs can be used on a single transmitter unit and sent over fiber to the receiver unit that also has an equal number of XLR outputs. The fiber allows the signal to be sent over a long distance without losing...
-
Item# THR-F-16TEL
The Thor Fiber F-16TEL is used for carrying 16 phone lines over fiber optic cable. Extend Telephone over Fiber applications offer a secure connection that is impossible to bug. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using a pair of these devices, 16 independent telephone lines can be extended over a fiber link. The F-16TEL provides full service for features...
-
Item# THR-F-32A-RCATXR
The Thor Fiber F-32A-RCA-TXRX RCA audio over fiber unit is able to send Line Level audio over fiber simply and easily over long distances without using traditional copper wiring. The units vary in size based on the amount of audio's for transmit and receive, from a compact form factor that can be easily bolted down, up to a rackmount 1RU unit for easy access in a rack. The kits are sold in pairs, transmitter and receiver; and can utilize both Singlemode or Multimode fiber. Using fiber allows...
-
Item# THR-F-32A-XLR-TX
The Thor Fiber F-32A-XLR-TXRX XLR audio over fiber unit is able to send balanced audio over fiber much further than traditional copper. Thor Fiber's Audio Interface with XLR kit has both a transmitter and receiver unit. Available options are for 2, 4, 8, 16 or 32 XLR inputs/outputs can be used on a single transmitter unit and sent over fiber to the receiver unit that also has an equal number of XLR outputs. The fiber allows the signal to be sent over a long distance without losing...
-
Item# THR-F-4A-RCA-TXR
The Thor Fiber F-4A-RCA-TXRX RCA audio over fiber unit is able to send Line Level audio over fiber simply and easily over long distances without using traditional copper wiring. The units vary in size based on the amount of audio's for transmit and receive, from a compact form factor that can be easily bolted down, up to a rackmount 1RU unit for easy access in a rack. The kits are sold in pairs, transmitter and receiver; and can utilize both Singlemode or Multimode fiber. Using fiber allows...
-
Item# THR-F-4A-TXRX
The Thor Fiber F-4A-TXRX Analog Audio over One Fiber Transmitter and Receiver Kit helps solve sending unbalanced audio over long distances using fiber. The audio fiber optic transmitter, converts analog audio 20hz to 20Khz fiber optic modulated digital stream so it could be transported over single mode or multimode fiber. The optical receiver converts the optical signal back to its orginal analog wave form. Offers very low latency 1ms - so it's perfect for live events, shows, concerts,...
Our Price: $495.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# THR-F-4A-XLRTXRX
The Thor Fiber F-4A-XLR-TXRX XLR audio over fiber units are able to send balanced audio over fiber much further than traditional copper. Our Audio Interface with XLR kit has both a transmitter and receiver unit. Available options are for 2, 4, 8 or 16, 32 XLR inputs/outputs can be used on a single transmitter unit and sent over fiber to the receiver unit that also has an equal number of XLR outputs. The fiber allows the signal to be sent over a long distance without losing any quality in...
-
Item# THR-F-8A-RCA-TXR
The Thor Fiber F-8A-RCA-TXRX RCA audio over fiber unit is able to send Line Level audio over fiber simply and easily over long distances without using traditional copper wiring. The units vary in size based on the amount of audio's for transmit and receive, from a compact form factor that can be easily bolted down, up to a rackmount 1RU unit for easy access in a rack. The kits are sold in pairs, transmitter and receiver; and can utilize both Singlemode or Multimode fiber. Using fiber allows...
-
Item# THR-F-8A-TXRX
The Thor Fiber F-8A-TXRX Analog Audio over One Fiber Transmitter and Receiver Kit helps solve sending unbalanced audio over long distances using fiber. The audio fiber optic transmitter, converts analog audio 20hz to 20Khz fiber optic modulated digital stream so it could be transported over single mode or multimode fiber. The optical receiver converts the optical signal back to its orginal analog wave form. Offers very low latency 1ms - so it's perfect for live events, shows, concerts,...
Our Price: $749.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# THR-F2AXLRB-TXRX
The Thor Fiber F-2A-XLR-B-TXRX XLR audio over fiber units are able to send balanced audio over fiber much further than traditional copper. Their Audio Interface with XLR kit has both a transmitter and receiver unit. Available options are for 2, 4, 8, 16 or 32 XLR inputs/outputs can be used on a single transmitter unit and sent over fiber to the receiver unit that also has an equal number of XLR outputs. The fiber allows the signal to be sent over a long distance without losing any quality...
