-
Item# ATNO-UHDEX70CRX
The Atlona AT-UHD-EX-70C-RX is an HDBaseT receiver for AV signals up to 230 feet (70 meters) over category cable with RS-232 and IR control plus Power over Ethernet capability. It is compatible with video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V Power over Ethernet. The AT-UHD-EX-70C-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for easy installation with rear panel I/O ports...
-
Item# ATNO-UHD-CAT-8
The Atlona AT-UHD-CAT-8 is a 4K/UHD HDMI to HDBaseT distribution amplifier featuring pass-through HDMI input connections, eight, HDBaseT outputs and display control capability. Each output transmits AV and control signals up to 230 ft. (70 m) @ 1080p and 130 ft. (40 m) @ 4K/UHD. Features include 4K/UHD @ 60 Hz with 4:2:0 color depth, HDCP 2.2 compliance, EDID management, and PoE for remote receiver powering. A wide variety of consumer and commercial displays may be controlled by the AT-UHD-CAT-8...
-
Item# ATNO-HDVS200TXWP
Switcher for HDMI and VGA Inputs with HDBaseT Output
The AT-HDVS-200-TX-WP is a 2x1 wall plate switcher for HDMI and VGA inputs with HDBaseT output. It features a US, two-gang, Decora form factor with one HDMI and one VGA input with an always-on 3.5mm audio connector. HDMI signals up to 4K/UHD @ 60Hz (YUV 4:2:0 color sub-sampling), VGA input signals up to 1920x1200, embedded audio, and control signals can be extended up to 328 feet (100 meters). The switcher receives power from...
-
Item# ATNO-HDVS150TXWP
The Atlona AT-HDVS-150-TX-WP features an HDMI input plus VGA input with 3.5mm audio connector and a two-gang, US two-gang wall plate. An optional face plate without buttons is also available (AT-HDVS-TX-WP-NB). Designed as a remote input device for the AT-UHD-CLSO-824 matrix switcher, the AT-HDVS-150-TX-WP combines the benefits of a switcher with built-in auto-switching and the advantages of long-distance HDBaseT signal extension over a single cable. HDMI signals up to 4K/UHD @...
-
Item# ATNO-ATEX100CEAK
The Atlona AT-HDR-EX-100CEA-KIT is an HDBaseT transmitter/receiver kit for high dynamic range (HDR) formats.
The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-EX-100CEA-KIT provides transmission of HDMI, Ethernet pass-through, and bidirectional IR and RS-232 control signals up to 330 feet (100 meters) over CAT6a/7 cable. This extender kit features visually lossless compression with no...
-
Item# ATNO-HD420
The Atlona AT-HD420 converts HDMI to a VGA or component output plus stereo audio. It enables an HDMI source to connect to a PC monitor, Projector or TV. Its high bandwidth capability supports a wide range of PC monitor and HDTV resolutions up to 1920 X 1200 or 1080p. The converter is also capable of de-embedding audio from the HDMI source and converting it to a stereo 1/8-inch interface. This will allow the user to connect it to a set of speakers, an AVR or any other audio device.
NOT...
-
Item# AT-UHD-EX-70C-TX
The Atlona AT-UHD-EX-70C-TX is an HDBaseT transmitter for HDMI transmission up to 230 feet (70 meters) over category cable with RS-232 and IR control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-70C-TX is HDCP 2.2 compliant and supports EDID communication. This HDBaseT transmitter is externally powered by the included power supply, making it ideal for extending AV and control directly to a projector...
-
Item# ATNO-HDVS-150-RX
HDBaseT Scaler with HDMI and Analog Audio Outputs
The Atlona AT-HDVS-150-RX is an HDBaseT scaler receiver for HDMI transmission over category cable. It receives AV signals up to 1080p/60Hz or 1920x1200 video with embedded multi-channel audio and control signals at distances up to 230 feet (70 meters). Features include balanced analog audio de-embedding, RS-232 control, and Power over Ethernet for compatible transmitting devices. The receiver offers advanced scaling...
-
Item# ATNO-AT-OMNI-121
The Atlona OmniStream™ 121 (AT-OMNI-121) is a networked AV decoder for an OmniStream-encoded video stream up to UHD @ 60 Hz and HDR, plus embedded audio and RS-232 or IR control pass-through. It is part of the OmniStream Pro Series, designed for high performance, scalable distribution of AV over Gigabit Ethernet in commercial applications. The OmniStream 121 is HDCP 2.2 compliant and ideal for the latest as well as emerging UHD and HDR displays. It features visually lossless...
-
Item# ATNO-AT-RON-442
The Atlona Rondo 442 (AT-RON-442) is a 1x2 HDMI distribution amplifier for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The Rondo 442 is ideal for applications requiring the latest as well as emerging 4K/UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats, and color space formats supported in the HDMI 2.0a specification, plus...
-
Item# ATNO-AT-RON-444
The Atlona Rondo 444 (AT-RON-444) is a 1x4 HDMI distribution amplifier for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The Rondo 444 is ideal for applications requiring the latest as well as emerging 4K/UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats, and color space formats supported in the HDMI 2.0a specification, plus...
-
Item# ATNO-AT-RON-448
The Atlona Rondo™ 448 (AT-RON-448) is a 1x8 HDMI distribution amplifier for high dynamic range (HDR) formats. Part of the comprehensive family of Atlona 4K HDR integration products, it is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The Rondo 448 is ideal for applications requiring the latest as well as emerging 4K/UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats,...
-
Item# ATNO-DVI60SRS
The Atlona AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.
The AT-DVI60SRS includes one...
-
Item# ATNO-DVI60SRSBS2
The AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.
The AT-DVI60SRS includes one transmitter and one receiver...
-
Item# ATNO-DVI60SRSBS3
The AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.
The AT-DVI60SRS includes one transmitter and one receiver...
-
Item# ATNO-DVI60SRSBS4
The AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.
The AT-DVI60SRS includes one transmitter and one receiver...
-
Item# ATNO-ATOMEST31AK
The Atlona AT-OME-ST31A-KIT is an HDBaseT transmitter & receiver combination that delivers a complete integration solution with 4K video extension, automatic switching for the HDMI & USB-C inputs, & automatic display control. It includes the AT-OME-ST31A three-input HDBaseT switcher & AT-UHD-EX-100CE-RX-PSE HDBaseT receiver. The OME-ST31A features audio de-embedding, mirrored HDMI & HDBaseT outputs, & 4K downscaling to 1080p for the HDMI output. The UHD-EX-100CE-RX-PSE features a compact,...
-
Item# ATNO-ATOMEEXKTLT
The Atlona AT-OME-EX-KIT-LT is an HDBaseT extender for video up to 4K/60 4:2:0, plus embedded audio, control, and USB over distances up to 130 feet (40 meters) for 4K/UHD, and up to 230 feet (70 meters) for 1080p/60 video. Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-EX-KIT-LT is HDCP 2.2 compliant and extends IR and RS-232 control signals. The integrated USB extension addresses the challenge of connecting between USB devices...
-
Item# ATNO-HDVS-150WPK
The Atlona AT-HDVS-150-WP-KIT is an HDBaseT extender kit that includes the AT-HDVS-150-TX-WP 2x1 wallplate switcher and transmitter, and the AT-HDVS-150-RX receiver and HD scaler. The HDVS-150-TX-WP features an HDMI input plus a VGA input with audio, in a US two-gang wallplate form factor. Video signals up to 1080p, plus embedded audio can be extended up to 230 feet (70 meters). The HDVS-150-WP-KIT serves as a compact, automated AV system with the convenience of automatic input selection,...
-
Item# ATNO-HDREX702PS
The Atlona AT-HDR-EX-70-2PS is an HDBaseT transmitter/receiver kit for high dynamic range (HDR) formats. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-EX-70-2PS provides HDMI transmission up to 230 feet (70 meters) for 1080p video, and up to 130 feet (40 meters) for 4K HDR over CAT6a/7 cable. This extender kit features visually lossless compression with no latency to enable HDR and 4K/60...
-
Item# ATNO-HDREX70CKT
The Atlona AT-HDR-EX-70C-KIT is an HDBaseT transmitter/receiver kit for high dynamic range (HDR) formats. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-EX-70C-KIT provides transmission of HDMI, as well as bidirectional IR and RS-232 control signals up to 230 feet (70 meters) for 1080p video, and up to 130 feet (40 meters) for 4K HDR over CAT6a/7 cable. This extender kit features visually...
-
Item# ATNO-OME-EX-KIT
The Atlona AT-OME-EX-KIT is an HDBaseT extender for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters). Part of the OmegaT Series of integration products for modern AV communications and collaboration, the OME-EX-KIT is HDCP 2.2 compliant and extends IR, RS-232, and IP control signals. The integrated USB extension addresses the challenge of connecting between USB devices at remote locations, and is ideal for software video conferencing...
Our Price: $1,400.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# ATNO-UHD-CAT-4ED
The Atlona AT-UHD-CAT-4ED distribution amplifier featuring pass-through HDMI input connections, four extended distance, Ethernet-enabled HDBaseT outputs and display control capability. Each output transmits AV and control signals up to 330 ft. (100 m). Features include 4K/UHD @ 60 Hz with 4:2:0 color subsampling, HDCP 2.2 compliance, EDID management, and PoE for powering remote receivers. A wide variety of consumer displays may be controlled by the UHD-CAT-4ED using CEC*. Designed...
-
Item# AT-HDVS-210HTXWP
The Atlona AT-HDVS-210H-TX-WP is a 2x1 switcher and HDBaseT transmitter with two HDMI inputs. It features a US one-gang, Decora-style wallplate form factor, and includes interchangeable black and white wallplates and faceplates. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded audio and control can be transmitted up to 330 feet (100 meters). The HDVS-210H-TX-WP is HDCP 2.2 compliant.
It is designed for use with select HDVS Series receivers and scalers,...
-
Item# AT-AVAEX702PSKIT
The Atlona AT-AVA-EX70-2PS-KIT is an Avance™ Series HDBaseT extender kit for transmitting 4K/UHD 60 Hz 4:2:0 video up to 130 feet (40 meters) or 1080p 60 Hz video up to 230 feet (70 meters). EDID filtering and clock stretching ensure video transmission integrity and stable connections. Integrated HDBaseT link test allows quick verification of cable, termination, and link quality. The AT-AVA-EX70-2PS-Kit is comprised of locally powered transmitter and receiver endpoints. Compact enclosures...
