-
Item# SENK-UBC-301
The Universal Broadcast Connection is a panel-mounted adapter designed to be used with the universal feed-through connection systems found inside broadcast studio's or outside broadcast vehicles.

-
Item# TRM-4-2-1
SENKO fiber optic terminators use doped fiber designs to eliminate unwanted back-reflection. The terminators are available in FC and SC with UPC or APC polishes, and also in small form factor design including LC and MU withAPC and UPC Polishes.
Features: Specifications: Return Loss: 55dB or Greater
Operating Temperature: -40 to +75 Degree C
Operating Wavelength: 1250-1650
Maximum Power: 500mw

-
Item# SENK-HW-20012-01
2 Quantities Available2.5mm Dust Cap for ST, SC and FC Fiber Connectors with Lanyard. Never lost series white fiber connector dust caps with attached lanyard. The retention band lanyard stretches to fit over the fiber connector and keeps the dust cap where it belongs - with the cable. Never lose a dust cap again!
Read More
-
Item# SENK-UBC-111
2 Fiber Modes AvailableThe Universal Broadcast Connection is a panel-mounted adapter designed to be used with the universal feed-through connection systems found inside broadcast studio's or outside broadcast vehicles.
Read More
-
Item# SENK-931-CAP-W-1
1.25mm LC fiber connector dust caps. Keep your LC connectors clean and free from dirt and dust.

-
Item# 215-103-J1
The Senko 215-103-J1 is a premium 125um single mode ST fiber connector with a blue mini 900um boot.
The SENKO ST connector has a bayonet-style housing and a long spring-loaded ferrule hold the fiber. They are available in both multimode or singlemode versions. Horizontally mounted simplex and duplex adapters are available with metal or plastic housing, with a choice of phosphor bronze or zirconia split sleeve.
Features: Bayonet style housing for easy termination
High precision alignment
Low...

-
Item# 215-103-L1
2 Colors AvailableThe Senko 215-103-L1 is a premium 125um single mode ST fiber connector with blue mini 3.0mm boot.
The SENKO ST connector has a bayonet-style housing and a long spring-loaded ferrule hold the fiber. They are available in both multimode or singlemode versions. Horizontally mounted simplex and duplex adapters are available with metal or plastic housing, with a choice of phosphor bronze or zirconia split sleeve.
Features: Bayonet style housing for easy termination
Epoxy and epoxy-less versions
High...
Read More
-
Item# 215-201-L2
Senko 215-201-L2 Premium 127um MultiMode ST Fiber Connector with Black Mini 3.0mm Boot. Pre-assembled 1pc Type Connector designed to meet the highest requirements in the market.
The SENKO ST connector has a bayonet-style housing and a long spring-loaded ferrule hold the fiber. They are available in both multimode or singlemode versions. Horizontally mounted simplex and duplex adapters are available with metal or plastic housing, with a choice of phosphor bronze or zirconia split sleeve. SENKO...

-
Item# FOA-SC-SC-SS-AF
Simplex single mode SC to SC couplers are designed for mounting in standard rectangular cut out style panels. Zirconia alignment sleeve to meet your specific design requirements. Designed for use with APC style fiber connectors.
Features: SC to SC Simplex Single-Mode Fiber Adapter
Connection Type: SC to SC
Telecommunication: Simplex
Data
Connection: Single-Mode
Zirconia Sleeve
Flange: Plastic Flange

-
Item# 932-153-1D2
Senko 932-153-1D2 Premium 125um SingleMode Duplex LC Fiber Connector with Blue Housing & Mini 3.0mm Blue Boot
The SENKO LC Unibody is fully compatible with the original LC family of singlemode and multimode connectors, adapters and associated components, manufactured under a worldwide license from OFS Fitel. The Unibody features a compact, pull-proof design with RJ-45 style interface, and features a one-piece molded housing with internal strength member, for significantly improved 90§ side-pull...

-
Item# 931-153-1B1
Senko 931-153-1B1 Premium 125um Singlemode Simplex Fiber LC Connector with Blue Housing & White 900um Mini Boot with Pot and Polish Style Termination.
The SENKO LC Unibody is fully compatible with the original LC family of singlemode and multimode connectors, adapters and associated components, manufactured under a worldwide license from OFS Fitel. The Unibody features a compact, pull-proof design with RJ-45 style interface, and features a one-piece molded housing with internal strength member,...

-
Item# ATN-1532-01-1
14 Attenuation Levels AvailableA fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source.
SENKO attenuators feature a proprietary type of metal-ion doped fiber which reduces the light signal as it passes through. This method of attenuation...
Read More
-
Item# ATN-632-01-1
13 Attenuation Levels AvailableA fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source.
SENKO attenuators feature a proprietary type of metal-ion doped fiber which reduces the light signal as it passes through. This method of attenuation...
Read More
-
Item# ATN-832-01-1
13 Attenuation Levels AvailableA fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source.
SENKO attenuators feature a proprietary type of metal-ion doped fiber which reduces the light signal as it passes through. This method of attenuation...
Read More
-
Item# SENK-988M-3S21-N
LC one piece duplex metal adapters are available in symmetrical SC foot print design with or without flanges. They can be ordered with internal shutters to provide much needed eye safety by shielding the potentially harmful laser light. These adapters have color coded dust cap and sleeve holder to ensure right adapter is used for the correct application (PC SM: Blue, PC MM: Beige, APC: Green). Both zirconia and phosphor bronze alignment sleeves are available on this product.
Features: 988 Series...

-
Item# TRM-1-2-1
Senko fiber optic terminators use doped fiber designs to eliminate unwanted back-reflection. The terminators are available in FC and SC with UPC or APC polishes, and also in small form factor design including LC and MU withAPC and UPC Polishes.
Features: Specifications: Return Loss: 55dB or Greater
Operating Temperature: -40 to +75 Degree C
Operating Wavelength: 1250-1650
Maximum Power: 500mw

-
Item# SENK-298-102
Senko 298-102 is an FC Oval Adapter "HD" zirconia straight split for APC connector 2.05±0.02.
Features: FC Square, High Density Oval and Round type available
UPC type Adapter haveWide key of 2.15mm
APC type Adapter have Narrow key of 2.05mm
Typical insertion loss under 0.05dB and Max IL of 0.20dB
High quality and durable Ni-Plated Brass body
Specifications: Shape: Oval

-
Item# SENK-31839192712
The Senko 318-391-927-12 XP Fit Plus is a pre-polished, pre-assembled connector compatible with the standard SC connector. In place of epoxy, an internal mechanical grip gently but effectively holds the fiber in place and can be installed in under two minutes. Without polishing or adhesives, the XP Fit Plus makes field installations quick and easy, eliminating the need for epoxy curing and hand polishing at the work site.
Features: Typical specification values are at 73.4°±5°F...

-
Item# TRM-3-2-1
SENKO fiber optic terminators use doped fiber designs to eliminate unwanted back-reflection. The terminators are available in FC and SC with UPC or APC polishes, and also in small form factor design including LC and MU withAPC and UPC Polishes.
Features: Specifications: Return Loss: 55dB or Greater
Operating Temperature: -40 to +75 Degree C
Operating Wavelength: 1250-1650
Maximum Power: 500mw

-
Item# 951-491-511-12
Senko 951-491-511-12 XPFIT LC and SC connectors are pre-polished, pre-assembled connectors that can be terminated quickly and reliably in the field with little equipment or expertise. Each connector contains an index matching gel and an internal mechanical grip to gently but effectively hold the fiber core in place inside the connector for installation. This eliminates the need for costly splicing equipment or curing ovens. Plugs exceed the TIA/EIA-568-B.3 standard. Each 12 pack of connectors...

-
Item# 294-193-2J
The Subscription Channel (SC) Connector is known for its locking mechanism which gives an audible click when pushed in or pulled out. This push-pull design prevents rotational misalignment. The SC Angled Physical Contact (APC) connector combines a curved ferrule end face with an 8§ angle which virtually eliminates all back reflection even from an unterminated connector.
The SENKO SC/PC connector is available in both singlemode and multimode versions, and is fully compatible with NTT-SC/APC hardware....

-
Item# 294-193-2K
The Subscription Channel (SC) Connector is known for its locking mechanism which gives an audible click when pushed in or pulled out. This push-pull design prevents rotational misalignment. The SC Angled Physical Contact (APC) connector combines a curved ferrule end face with an 8§ angle which virtually eliminates all back reflection even from an unterminated connector.
The SENKO SC/PC connector is available in both singlemode and multimode versions, and is fully compatible with NTT-SC/APC hardware....

-
Item# 294-193-2L
The Subscription Channel (SC) Connector is known for its locking mechanism which gives an audible click when pushed in or pulled out. This push-pull design prevents rotational misalignment. The SC Angled Physical Contact (APC) connector combines a curved ferrule end face with an 8§ angle which virtually eliminates all back reflection even from an unterminated connector.
The SENKO SC/PC connector is available in both singlemode and multimode versions, and is fully compatible with NTT-SC/APC hardware....

-
Item# 931-153-3B6
Premium LC/APC SX 125um 900um Mini Boot Green for Pot & Polish Style connectors
Features: Specifications:

-
Item# SENK-UBC-181
Senko UBC-181 UBC Adapter Panel LC Duplex MM(Beige) Fibre Optic Adapter
