Where to Buy DMX Lighting Control

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Pathway Connectivity PWPP TM P1 XLR5F Pathport Truss-mount 1-Port XLR 5-Pin Female
Pathway Connectivity Solutions
Item# P6152
The Pathway Connectivity PWPP TM P1 XLR5F Portable Pathport Uno Node is a single port DMX gateway, with full support for Pathport DMX management and distribution features. It is ideal for venues and applications where a simple, single DMX port is needed, in either flushmount or portable form factors. Features: Single DMX512 port DMX routing on a universe or channel-by-channel basis Multiple source merging or prioritizing using powerful softpatch engine DMX output speed and signal loss behavior...
Our Price: $679.00
Availability: In Stock
Add to Wish List
City Theatrical 5900 Multiverse SHoW Baby Wireless DMX Transceiver
City Theatrical Inc.
Item# CTYTH-5900
With tens of thousands of units sold since their introduction in 2011, ShoW Baby plug and play transceivers set the standard for ease of use and reliability at an affordable price point. The addition of Multiverse radio technology enhances the performance even more. City Theatrical's new Multiverse® SHoW Baby® (5900) is a wireless DMX transceiver that delivers breakthrough plug and play wireless DMX and RDM transmission. In its default mode, it works like any other SHoW Baby 6...
Our Price: $414.30
Availability: In Stock
Add to Wish List
Pathway Connectivity PWREP DIN P4 RDM DMX/RDM DMX Repeater with DIN-mount 4-Ports - E1.20 RDM Compliant
Pathway Connectivity Solutions
Item# P1009
The Pathway Connectivity P1009 is a DIN-rail mountable four-way repeater that supports the bi-directional communication standard E1.20 Remote Device Management ("RDM"), as well as DMX512. Used in installations that require 'star' wiring configurations, all output ports are separate electrical entities, fully opto-isolated and independently protected against fault voltages. Features: One DMX512 /RDM input port Four fully isolated DMX512/RDM bi-directional output ports One active DMX512/RDM...
Our Price: $650.00
Availability: In Stock
Add to Wish List
City Theatrical 5902 Multiverse Node 900MHz/2.4GHz Wireless DMX Transceiver - Licensed for use in North America Only
City Theatrical Inc.
Item# CTYTH-5902
Each City Theatrical Multiverse Node 5902 is a transceiver. As a single universe transmitter, it functions in a similar plug and play manner to the Multiverse® SHoW Baby® and legacy SHoW DMX SHoW Baby® products, and also has a full user interface, with four buttons and a backlit LCD display. As a receiver, the Multiverse Node is the primary single universe standalone receiver in the Multiverse system, and can be part of a larger multi-universe setup. Multiverse Node models...
Our Price: $522.02
Availability: In Stock
Add to Wish List
Pathway Connectivity Pathport OCTO Rack-mount 8-Port DMX/RDM Ethernet Gateway - 5-Pin XLR Female/IEC Power
Pathway Connectivity Solutions
Item# P6421
2 Options Available
The Pathway Connectivity P6421 Pathport OCTO provides all the features and flexibility that Pathports are renowned for, at the lowest cost-per-port ever. The Pathport OCTO's status LEDs provide instant confirmation of port direction and activity. The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction and protocol selection. Different Ethernet protocols may even be merged together...
Read More
Our Price: $2,150.00
Availability: In Stock
Add to Wish List
Obsidian Control Systems Netron EN12-45 High-Density Ethernet to DMX Gateway - 12 RDM Compatible RJ45 DMX Ports
Elation
Item# ELAT-EN12-45
The Obsidian Control Systems Netron EN12-45 is a powerful high-density Ethernet to DMX gateway with twelve RDM compatible RJ45 DMX ports. Easy to configure with a range of integrated presets plus a wide array of advanced merge and routing features it is the ideal device for live production or installations requiring a lot of physical DMX ports. Contact closures allow for recall of presets, routings, mergers or any of the internal cues. Features: RDM, Artnet and sACN support Factory...
Our Price: $1,040.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
City Theatrical 6000 DMXcat Multi Function Test Tool
City Theatrical Inc.
Item# CTYTH-6000
City Theatrical`s DMXcat® system (6000) is designed for use by the lighting professional who is involved with the planning, installation, operation, or maintenance of theatrical and studio lighting equipment. The system consists of a small hardware interface device and a suite of mobile applications. Together, they combine to bring DMX/RDM control plus several other functionalities to the user's smartphone for use wherever and whenever they are needed. Developed with input from designers...
Our Price: $421.66
Availability: In Stock
Add to Wish List
Doug Fleenor Design PRE10-A-WHT DMX512 Playback Device for Preset 10 Architectural - White
Doug Fleenor Design, Inc.
Item# DFD-PRE10-A-WHT
The Doug Fleenor Design PRE10-A-WHT Preset 10 Architectural is a lighting control station capable of storing up to ten presets. These presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned a unique fade time, from 0 to 999 seconds. Presets are recalled by pressing one of the buttons. Systems can be created by using one or more stations and a power supply. The solid aluminum faceplate is designed to install over a standard single gang electrical...
Our Price: $658.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ikan IDX-096 96 Channel DMX Console
Ikan Corporation
Item# IKAN-IDX-096
96 Channel DMX Console Features: Standard DMX 512 Signal Control 96 Channel Variable Dimming Control 96 Programmable Scenes (4 pages containing 24 scenes each) 24 Chaser Sequence in 64 Steps Audio Control Available Cross Fade -Memory Card (Optional) Specifications: Build Material: Aluminum Channels: 96 Dimensions: 18 x 3 x 13 in. Dimensions (Metric): 45.7 x 7.6 x 33 cm DMX Standard: DMX 512 Power Supply: AC 90 - 240V Shipping Dimensions: 7 x 17 x 21 in. Shipping Dimensions (Metric): 17.7 x 43.1...
Our Price: $999.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Elation DMX10-5 Rackmount 10-port DMX 5-Pin Splitter with Dual Inputs
Elation
Item# ELAT-DMX10-5
The Elation DMX10-5 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 5pin XLR DMX outputs. Utilizing long life toggle switches every port is routed to either the A or B input, providing flexibility to accommodate any situation. The NETRON DMX10 is made from a rugged metal chassis featuring impact resistant paint and a lightweight yet solid construction. The DMX10 is ideally suited for installations and touring applications that do not require RDM communication...
Our Price: $396.00
Availability: In Stock
Add to Wish List
Obsidian Control Systems Netron EN6 IP Ethernet to DMX Gateway - 6 RDM Ports - IP66 Rated Chassis
Elation
Item# ELAT-EN6-IP
The Obsidian Control Systems Netron EN6 IP is a powerful Ethernet to DMX gateway with six RDM compatible ports in a rugged IP66 rated chassis. It is designed for live productions, movie sets, temporary outdoor installations, or interior use with long term protection from humidity, dust and debris. The EN6 IP unlocks the four Universe ONYX NOVA Edition. Features: IP66 Ethernet to DMX Gateway RDM, Artnet and sACN support Factory and user presets for plug and play setups Line Voltage...
Our Price: $550.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Pathway Connectivity PWPP WM P1 XLR5F BL Pathport Wall-mount 1-Port XLR 5-Pin Female - Black
Pathway Connectivity Solutions
Item# P6102BL
Pathway Connectivity P6102BL Pathport® UNO™ is a single port DMX gateway, with full support for Pathport DMX management and distribution features. It is ideal for venues and applications where a simple, single DMX port is needed, in either flushmount or portable form factors. Features: Single DMX512 port DMX routing on a universe or channel-by-channel basis Multiple source merging or prioritizing using powerful softpatch engine DMX output speed and signal loss behavior user-set LCD...
Our Price: $509.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Obsidian Control Systems NETRON EN4 Ethernet to DMX Gateway - 4 Port
Elation
Item# ELAT-NRE012
The NETRON EN4 is a powerful Ethernet to DMX gateway with four RDM compatible ports. Designed for live production and installations with a rugged housing and high-performance processing it offers flexible mounting options to cover any situation. Features: RDM, Artnet and sACN support Factory and user presets for plug and play setups Line Voltage or POE powered 1.8” OLED Display with rotary knob 99 Internal cues with fade and delay time Remote configuration via internal webpage Powder-coated...
Our Price: $490.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Obsidian NX DMX 2 Port DMX Node USB for ONYX OS Lighting Console
Elation
Item# ELAT-NX-DMX
Ideal for use in small productions, clubs, conventions and public events, the Obsidian NX DMX 2-Port DMX Node for ONYX is a fast, easy, and inexpensive way to add two additional DMX ports to your system. The plug-and-play unit provides instant access to DMX In/Out as well as RDM communication. The NX DMX supports the ONYX control platform for up to four universes on unlicensed PCs and up to 255 universes when connected to an ONYX-licensed PC or console. Features: USB Powered: Plug-and-Play Instant...
Our Price: $449.00
Availability: In Stock
Add to Wish List
Doug Fleenor Design 124-5 4 Output Bi-directional DMX Splitter with 5-Pin XLR Connectors
Doug Fleenor Design, Inc.
Item# DFD-124-5
The Doug Fleenor 124 Design is a four output DMX splitter that also supports the RDM protocol. It is available with 3 pin XLR (model 124-3), 5 pin XLR (model 124-5), or RJ-45 connectors. Each output features its own driver circuit, insuring a problem on one output will not affect the other outputs. The four outputs share a common (pin 1s are tied together). The input is completely isolated from the outputs (there are no electrical connections between any of the input pins and any...
Our Price: $444.00
Availability: In Stock
Add to Wish List
Elation Professional EP2 Ethernet to DMX Gateway with 2 RDM Ports
Elation
Item# ELAT-NRE034
The Elation Netron EP2 is a compact Ethernet to DMX gateway with two RDM compatible ports designed for wall mount, truss mount and standalone installations. It is configurable via the integrated OLED display and encoder, or the internal web remote. EP2 is powered over Ethernet or via the convenient USB-C connection. Features: RDM, ArtNet and sACN support Factory and user presets for plug and play setups POE or USB-C powered 1.3" OLED Display with rotary knob Remote configuration...
Our Price: $390.00
Availability: In Stock
Add to Wish List
Obsidian Control Systems NETRON RDM 6XL 5-Pin DMX/RDM Splitter - 6 Port
Elation
Item# ELAT-NRD123
The NETRON RDM 6XL is a rugged and compact DMX/RDM Splitter. Designed for live production and installations, it features six opto-isolated 5pin XLR outputs and flexible mounting options to cover any situation. Features: 6 XLR 5pin outputs DMX and RDM compliant Optically isolated ports Power / DMX Through connectors Powder-coated aluminum 1/2 rack housing Specifications: Standalone: Truss-mount (M10 or M12 mounting hole) Wall-mount horizontal or vertical (included) DIN Rail...
Our Price: $448.00
Availability: In Stock
Add to Wish List
Lightronics AF2104 Unity Architectural Remote Station
Lightronics
Item# LGT-AF2104
The AF2104 is a 4 scene, wall mount remote control unit intended for use with the Lightronics AR1202 Architectural dimmer. The unit fits in a standard double gang wall switch box. All power and data connections are via a 4 wire communication bus between itself and the AR1202 dimmer. In addition to manual fader control of 4 scenes, pushbutton switches are provided to activate a blackout and full on selection. LED indicators provide status feedback. Multiple units may be chained together to provide...
Our Price: $329.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Obsidian Control Systems NETRON RP2 2-Channel Intelligent 15A 2-way DMX/RDM Power Relay
Elation
Item# ELAT-RP2
The Obsidian Control Systems NETRON RP2 is an intelligent 2-way DMX Power Relay that is an ideal tool to protect fixtures from damage, lower power consumption, and reducing the overall wear and tear of any lighting system. The device is configurable via the integrated OLED display and encoder with real time status and power consumption feedback. RP2 features optional smart power sequencing and DMX traffic detection to allow complete automation of fixture power based on DMX status. Simply...
Our Price: $295.00
Availability: In Stock
Add to Wish List
Obsidian Control Systems NETRON RJ-T Compact RJ45 DMX to Screw Terminal DMX/RDM
Elation
Item# ELAT-NETRON-RJT
The Obsidian Control Systems NETRON RJ-T is a useful, compact adapter designed to convert ESTA compliant RJ45 DMX ports to a 3-wire screw terminal. Ideal for installations of NETRON RJ45 products like the RDM645 or the EN12-45, it is also a compatible with any other existing RJ45 DMX wiring infrastructure. Features: RJ45 to screw terminal DMX/RDM Adapter ESTA compliant DMX pin-out Compact and short injection molded housing Compatible with all ESTA DMX compliant fixtures and DMX distribution...
Our Price: $20.00
Availability: In Stock
Add to Wish List
City Theatrical 6005 XLR5 DMX Male to RJ45 Adapter For The DMXcat Multi Function Test Tool Part# 6000
City Theatrical Inc.
Item# CTYTH-6005
XLR5M to RJ45 Adapter for City Theatrical`s DMXcat Multi Function Test Tool.
Our Price: $21.76
Availability: In Stock
Add to Wish List
City Theatrical 6006 DMXcat XLR5M to XLR3F Adapter for use with 6000 Multi Function Test Tool
City Theatrical Inc.
Item# CTYTH-6006
City Theatrical's DMXcat Multi Function Test Tool system is designed for use by the lighting professional who is involved with the planning, installation, operation, or maintenance of theatrical and studio lighting equipment. The system consists of a small hardware interface device and a suite of mobile applications. Together, they combine to bring DMX/RDM control plus several other functionalities to the user's smartphone for use wherever and whenever they are needed. Developed with input from...
Our Price: $13.05
Availability: In Stock
Add to Wish List
City Theatrical 6007 XLR5 DMX Male to XLR5 Male Turnaround For The DMXcat Multi Function Test Tool Part# 6000
City Theatrical Inc.
Item# CTYTH-6007
XLR5M to XLR5M Turnaround For The DMXcat Multi Function Test Tool Part# 6000.
Our Price: $13.05
Availability: In Stock
Add to Wish List
Lightronics AC21116 Unity Architectural Remote Station
Lightronics
Item# LGT-AC21116
The AC2116 is a wall mounted, sixteen scene, digital remote for use with the Lightronics AR1202 architectural dimmer. User operation is as simple as it can get (16 numbered scene buttons and an “OFF” control). LED scene indicators always display the active scene number. The unit fits into a standard double gang wall switch box. The unit communicates with the AR1202 via a 4 wire bus which will accommodate multiple AC2116 units and other remote units. All AC2116 wiring is low voltage. The unit...
Our Price: $329.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics AF3107 Unity Architectural Remote Station
Lightronics
Item# LGT-AF3107
The AF3107 is a 6 scene, wall mount remote control unit intended for use with the Lightronics AR1202 Architectural dimmer. The unit fits in a standard three gang wall switch box. All power and data connections are via a 4 wire communication bus between itself and the AR1202 dimmer. The unit provides manual fader control of 6 scenes. A 7th fader is provided as a master control for all six scenes. Pushbutton switches are provided to activate a blackout and all full on selection. LED indicators...
Our Price: $359.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics AF5113 Unity Architectural Remote Station
Lightronics
Item# LGT-AF5113
The AF5113 is a twelve scene, wall mount remote control unit intended for use with the Lightronics AR1202 Architectural dimmer. The unit fits in a standard five gang wall switch box. All power and data connections are via a 4 wire communication bus between itself and the AR1202 dimmer. In addition to manual fader control of twelve scenes, a master fader is provided. The master fader enables intensity control for all twelve scenes. Pushbutton switches are included to activate a blackout and full...
Our Price: $426.75
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics AI1001 Unity Architectural Remote Station
Lightronics
Item# LGT-AI1001
The AI1001 is a digital control interface for use with the Lightronics Architectural Series of products. This unit enables dimmer scene activation from multiple remote locations using a handheld IR remote. A LED indicator in the unit provides operator visual feedback when a signal is being received. A dedicated hand held IR Remote transmitter is supplied with the unit. Features: 13 Scene Infrared Remote Station Available in White Infrared Scene Control Status LEDs Blackout RS-485 Single Gang...
Our Price: $276.75
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics AS40M Portable Dimmer
Lightronics
Item# LGT-AS40M
The AS40M is a compact portable 4 channel light dimmer. It has a maximum capacity of 600 Watts per channel and maximum TOTAL load capacity of 2400 Watts. It is supplied with an input power cord which may be connected to a 120 VAC, 20 Amp power circuit. The unit operates using the USITT DMX-512 protocol. The AS40M may be operated in a relay (non-dim) mode. The unit will also function as a stand alone chaser and has eight primary preset chase patterns which may be used. An additional manual operating...
Our Price: $315.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics AS62DCSL Portable Dimmer
Lightronics
Item# LGT-AS62DCSL
Lightronics AS62DCSL is a portable dimmer. Features: 6 Channels 1200W per Channel 2 - 30 Amp Circuits 7200 Watts Total Capacity 8 Built in Chases DMX-512 & LMX-128 Relay Mode Switchable Circuit Breakers 19 Pin LINK© Socapex Output 120V Specifications: Channels: 6 Channel Capacity: 1200 Watts per Channel Total Power: 7200 Watts Control Protocol: DMX-512 and 3 Wire LMX-128 Control Connections: Dual 5...
Our Price: $749.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics CP401 Unity Architectural Wall Plate
Lightronics
Item# LGT-CP401
Single Gang Wall Plate with 4 Pin Female DMX Connector Features: Specifications:
Our Price: $27.75
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lightronics CP402 Unity Architectural Wall Plate
Lightronics
Item# LGT-CP402
Single Gang Wall Plate with 4 Pin Female DMX Connector Features: Specifications:
Our Price: $27.75
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lightronics CP522 Unity Architectural Wall Plate
Lightronics
Item# LGT-CP522
Single Gang Wall Plate with DUAL 5 Pin Female DMX Connectors Features: Specifications:
Our Price: $55.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lightronics RE82D-DP 8 Channel Rack Mount Dimmer with Edison Duplex Outlet Panel
Lightronics
Item# LGT-RE82D-DP
The Lightronics RE82D is an 8 channel rack mount dimmer with a maximum capacity of 2,400 watts per channel giving a total of 19,200 watts. It is suitable for church, stage, theater, school, night club, live performances and other event and artistic applications. The RE82D is controlled by a lighting console. The unit uses the DMX-512 control protocol. Channels A - D and/or channels E - H may be switched to operate in"relay" mode. In relay mode channels are either full on or full off (non-dim)...
Our Price: $1,319.25
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lightronics RE82L Rack Mount Dimmer
Lightronics
Item# LGT-RE82L
The RE82L is an 8 channel rack mount dimmer with a maximum capacity of 2,400 watts per channel giving a total of 19,200 watts. It is suitable for church, stage, theater, school, night club, live performances and other event and artistic applications. The RE82L is controlled by a lighting console. The unit uses the LMX-128 control protocol. Channels A - D and/or channels E - H may be switched to operate in "relay" mode. In relay mode channels are either full on or full off (non-dim) depending on...
Our Price: $1,319.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics TL-5024 24-Channel Lighting Control Console with DMX-512 Option
Lightronics
Item# LGT-TL5024-DMX01
2 Types Available
The TL5024 is a 24 channel lighting control console which includes advanced features such as multiple scene banks, softpatching, multiple user programmable chases, and a LCD Status Display. It is suitable for church, stage, theater, disco, night club, live performances and other event and artistic applications. The unit can optionally be factory equipped to transmit the USITT DMX-512 protocol. Version LGT-TL5024-DMX01 availble using pull-down menu above. The TL5024 may be...
Read More
Our Price: $749.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics TX30 DMX-512 (5 pin) Input to LMX-128 Output Converter
Lightronics
Item# LGT-TX30
The TX30 is a very compact in-line translator which receives USITT DMX-512 signals and transmits the Lightronics (LMX-128) multiplex protocol. This is the industry standard multiplex protocol. Features: DMX-512 Input LMX-128 Output 192 Channels Out Optional AMX-192 Output Specifications: Input Signal: DMX-512 Input Connection: 5 Pin Male and 5 Pin Female Pass Thru Output Signal: LMX-128 (192 channels) Output Connection: 3 Pin Male XLR Addressing: DIP Switch Selectable Power Input: Phantom...
Our Price: $249.75
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics XC40 DMX Portable Dimmer
Lightronics
Item# LGT-XC40
The XC40 is a four circuit compact dimmer with a load capacity of 600 Watts per circuit. Each circuit is protected by a 5 Amp fuse. It can be controlled in several ways - the most common being DMX-512. Other control modes are also provided for stand alone operations. These include individual channel control and chaser functions. Individual circuits may be operated as non-dim (relay) circuits. Individual circuits may be set for one of several response curves and may be limited to less than full intensity....
Our Price: $300.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics XC62 DMX Portable Dimmer
Lightronics
Item# LGT-XC62
The XC62 is a six circuit compact portable dimmer with a load capacity of 1200 Watts per circuit. Each circuit is protected by a 10 Amp fuse. It can be controlled in several ways - the most common being DMX-512. Other control modes are also provided for stand alone operations. These include individual channel control and chaser functions. Individual circuits may be operated as non-dim (relay) circuits. Individual circuits may be set for one of several response curves and may be limited to less than...
Our Price: $554.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Leviton/NSI MC7524 24/48 Channel Controller DMX Micro-Plex 60ch Analog
Leviton Manufacturing Co
Item# NSI-MC7524
The MC 7500 series of consoles are the ideal combination of power, flexibility and ease of use. Three operation modes provide two-scene manual, single scene with submasters, or wide mode for double channel capacity.The MC 7500 series consoles are designed to meet the needs of the advanced lighting designer, with features including cue stacking, SMPTE via MIDI, level sensitive chasing, and up to 512 memory scene capability. Yet, with a classic two-scene layout and an intuitive operating system, these...
Our Price: $2,269.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Westcott 7577 Flex Cine Dimmer Adapter for Legacy 2 x 2 Foot Daylight Mat
Westcott
Item# WES-7577
Enhanced Controls for Original Flex Mats Westcott 7577 Flex Cine Dimmer Legacy Adapters allow original Flex LED mat owners to upgrade to the Flex Cine Wireless DMX Dimmer. Each mat-specific adapter connects an original Flex mat to a Flex Cine Dimmer with a locking TE 9-pin connector. Unique Mat Sensing Technology Mat Sensing Technology communicates the size and output of each original Flex mat to the Flex Cine Wireless DMX Dimmer. This unique...
Our Price: $74.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Westcott 7578 Flex Cine Dimmer Adapter for Legacy 1 x 1 Foot Bi-Color Mat
Westcott
Item# WES-7578
Enhanced Controls for Original Flex Mats Westcott 7578 Flex Cine Dimmer Legacy Adapters allow original Flex LED mat owners to upgrade to the Flex Cine Wireless DMX Dimmer. Each mat-specific adapter connects an original Flex mat to a Flex Cine Dimmer with a locking TE 9-pin connector. Unique Mat Sensing Technology Mat Sensing Technology communicates the size and output of each original Flex mat to the Flex Cine Wireless DMX Dimmer. This unique...
Our Price: $74.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design 121-3 DMX512 One Input / One Output Isolation Splitter / Amplifier - 3 Pin XLR
Doug Fleenor Design, Inc.
Item# DFD-121-3
The Doug Fleenor Design 121-3 is a DMX splitter that is available in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with miswiring and lightning protection, and a universal power supply is also available (see the model 125EE data sheet). Units with any number of inputs and outputs may be manufactured on a custom basis. Each output is electrically isolated from the input, and from every other output, by 2500 volt optical...
Our Price: $483.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design Model 123-3 DMX Splitter/Amplifier (3 Pin XLR - 120VAC)
Doug Fleenor Design, Inc.
Item# DFD-123-3
The Doug Fleenor Design Model 123 DMX splitter is available in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with miswiring and lightning protection, and a universal power supply is also available (see the model 125EE data sheet). Units with any number of inputs and outputs may be manufactured on a custom basis. Each output is electrically isolated from the input, and from every other output,...
Our Price: $600.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design 127-5 7 Output DMX/RDM Isolated Splitter
Doug Fleenor Design, Inc.
Item# DFD-127-5
The Doug Fleenor Design 127-5 is a bi-directional DMX512/RDM splitter with 5 pin XLR connectors. Each of the eight ports is fully isolated, and bi-directional with optical isolation, fault protection to ±60V, and transient protection to ±15KV. The unit has a universal voltage power supply and uses slew-rate-limited output drivers. Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables. Note: This product uses a slew-rate-limited...
Our Price: $1,682.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design COLORWHEEL 3 - 4 or 5 Channel Architectural DMX512 Controller
Doug Fleenor Design, Inc.
Item# DFD-COLORWHEEL
The Color Wheel is a simple wall-mounted device designed to operate DMX512 based LED lighting fixtures. It can be configured to operate 3, 4, or 5 channel fixtures. Active channels may be increased or decreased individually, or all at once. Specifications: Controller Type: Manual, Wall Console Controller Protocol: DMX-512DMX Device Type: Wall Plate
Our Price: $416.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design DMX512DIM-ELV 12 Channel 100w Dimmer Pack
Doug Fleenor Design, Inc.
Item# DFD-DMX12DIM-ELV
The Doug Fleenor Design DMX12DIM-ELV is a 12 channel, 100 Watt per channel dimmer pack. It is fed by a single 120VAC 15A branch circuit. Each of the dimmers can be separately controlled using a DMX512-based lighting controller. The dimmers use MOSFET power devices. The dimmed outputs are Electronic Low Voltage(ELV) compatible using reverse phase (aka: trailing edge) control techniques. The DMX12DIM-ELV is housed in an enclosure suitable for portable use or for mounting in a standard...
Our Price: $1,212.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design DMX1REL20A-2POLE One Relay 240VAC Input and Output 20A total Connected Load 2 Pole
Doug Fleenor Design, Inc.
Item# DFD-DMX1REL20A2P
The DMX1REL20A-2POLE controls two output legs using a single channel of DMX512. The relays can switch up to a 20 amp line voltage load and are built with a 30 amp relay for robust performance. The output is suitable for 208-240VAC with both the hot legs being switched. The unit is provided with two 18" 12/3 SJ pigtails for line in and switched line out. Supplied with 20 amp twist lock connectors (L6-20) as standard, the unit may be wired with different connectors by special order or may be...
Our Price: $557.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design GIZMO DMX512 Test Box - Transmit/Receive/Save Playback Scenes
Doug Fleenor Design, Inc.
Item# DFD-GIZMO
The Doug Fleenor Design GIZMO can transmit, receive, save and playback scenes, and perform a variety of data and cable tests. It features a rugged 1/10" aluminum enclosure, a 16 character by 2 line back lit display, an optically isolated input, a slew-rate limited output, a NiMH rechargeable battery good for four hours of continuous testing, and a five year warranty. A nylon carrying case and AC adapter/charger are included. The full numeric keyboard provides direct channel access...
Our Price: $875.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design PRE8-D Lighting Control Station - Preset 8 Desktop 8 Snapshot Sliders
Doug Fleenor Design, Inc.
Item# DFD-PRE8-D
Doug Fleenor Design PRE8-D Preset 8 is a lighting control station that stores eight preset looks. Each look, or scene, has an associated slider that adjusts the intensity of that look. The looks are recorded into Preset 8 by capturing the output of any DMX512 console. The user or installer creates a look using their DMX512 console of choice, then presses the recessed record button on Preset 8, followed by moving the slider to be recorded. Often, presets are recorded only once, at the time...
Our Price: $1,284.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Westcott 7582 Flex Cine Dimmer & AC Adapter
Westcott
Item# WES-7582
The Westcott 7582 intuitive Flex Cine Dimmer is designed to control Flex Cine Bi-Color and Daylight mats up to 1x2'. It's also backwards compatible with original Flex 1x1' and 1x2' LED mats with a legacy adapter cable. This compact flexible LED dimmer is constructed with a heavy-duty, lightweight aluminum enclosure for secure use and travel. It can be mounted to a stand via the built-in 1/4"-20 thread or hung with the removable d-ring shoulder strap. The Flex Cine Dimmer offers on-board...
Our Price: $449.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design DMXDECELERATORII-3 DMX Timing Decelerator Two - 3-Pin XLR
Doug Fleenor Design, Inc.
Item# DMXDECELERATORII
The DMX DECELERATOR II is a DMX512 isolator and re-timing device. It can receive any signal within the DMX512 specification and it can accept some signals outside of the specification. It produces a DMX output signal with "relaxed" timing characteristics which are required by some DMX receiving devices. In addition, a BYPASS mode is provided. When this mode is selected, the DMX DECELERATOR II copies the timing from the input signal to the isolated output directly with no changes. This...
Our Price: $208.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lightronics CP501 Unity Architectural Wall Plate
Lightronics
Item# LGT-CP501
Single Gang Wall Plate with 5 Pin Male DMX Connector Features: Specifications:
Our Price: $41.25
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design DMX6REL15A Six Channel DMX512 Relay Pack with 1 Line In 15A Pigtail
Doug Fleenor Design, Inc.
Item# DFD-DMX6REL15A
Doug Fleenor Design makes a series of Relay Packs that are controlled by DMX512. These six channel units are designed to switch up to 15 amp line voltage loads and use 30 amp relays. Line voltage input is on an 18" 12/3 SJ pigtail(s) fitted with 15 amp parallel blade plug(s). Model DMX6REL15A has one line in pigtail. Model DMX6REL30A has two line in pigtails (one for channels 1-3, one for channels 4-6). Switched line outputs are on chassis mounted 15 amp parallel blade receptacles....
Our Price: $734.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lightronics DB-612-TL Distributed Dimming Bar - L5-20 Twistlock
Lightronics
Item# LGT-DB-612-TL
The DB-612 is a 6 channel dimmer with a capacity of 1,200 watts per channel giving a total of 7200 watts. The DB-612 is controlled by a control console using the USITT DMX-512 lighting control protocol. Individual channels may be set to operate in "relay" mode where channels are switched only on or off depending on console fader position. Features: 6 Channels 1200W per Channel DMX512 Integrated Accessory Mounting Track Fast Acting 10 Amp Magnetic Circuit Breakers 4 Position Terminal Strip Power...

Our Price: $1,629.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWPP WM P1 XLR5F SS Pathport Wall-mount 1-Port XLR 5-Pin Female - Stainless Steel
Pathway Connectivity Solutions
Item# P6102SS
The Pathway Connectivity P6102SS Pathport® UNO™ is a single port DMX gateway, with full support for Pathport DMX management and distribution features. It is ideal for venues and applications where a simple, single DMX port is needed, in either flushmount or portable form factors. Features: Single DMX512 port DMX routing on a universe or channel-by-channel basis Multiple source merging or prioritizing using powerful softpatch engine DMX output speed and signal loss behavior user-set LCD...
Our Price: $550.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWWSI VPOE B2 BL Wall Station Insert Vignette Power over Ethernet Master 2-Buttons - Black
Pathway Connectivity Solutions
Item# P700-5411BL
Pathway Connectivity P700-5411BL Vignette is a system of modular button and slider wall station inserts that allow you to snapshot four universes of E1.31 sACN or one universe of DMX512. Design custom wall stations, from single-gang up to six-gang. Buttons can be press-and-hold to record, and press to play back. Sliders can act as grand master for the Vignette's output, or proportionately control user-defined zones with minimum and maximum values for individual channels. Playback and crossfade...
Our Price: $735.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWWSI VPOE B2 WH Wall Station Insert Vignette Power over Ethernet Master 2-Buttons - White
Pathway Connectivity Solutions
Item# P700-5411WH
Pathway Connectivity P700-5411WH Vignette is a system of modular button and slider wall station inserts that allow you to snapshot four universes of E1.31 sACN or one universe of DMX512. Design custom wall stations, from single-gang up to six-gang. Buttons can be press-and-hold to record, and press to play back. Sliders can act as grand master for the Vignette's output, or proportionately control user-defined zones with minimum and maximum values for individual channels. Playback and crossfade...
Our Price: $735.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWREP 8-Port 1RU Rackmount DMX Repeater (Non-RDM) with 5-Pin Female XLR Connectors
Pathway Connectivity Solutions
Item# P9014
The Pathway P9014 DMX Repeater is an essential component of any DMX512 distribution system, permitting star wiring configurations while isolating and protecting connected equipment from harmful electrical faults, ground loops and common mode voltages. Multiple connector choices, including customized arrangements, ensure easy installation in existing systems, and flexibility in new system design. Features: Silent operation 8 outputs Multiple connector options including RJ45 No fuses...
Our Price: $1,265.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWREP RM P8 RJ45EC FRONT NONRDM DMX Repeater Rackmount 8-Ports RJ45 EtherCON Front Panel Connector
Pathway Connectivity Solutions
Item# P9018
The Pathway Connectivity P9018 DMX Repeater is an essential component of any DMX512 distribution system, permitting star wiring configurations while isolating and protecting connected equipment from harmful electrical faults, ground loops and common mode voltages. Features: Silent, fanless operation 8 outputs Multiple connector options including RJ45 No fuses - self-resetting port protection recovers from voltage faults Field-serviceable - a spare transceiver and opto-coupler ships with every...
Our Price: $1,265.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design NODE 4 4-Port Ethernet to DMX Interface
Doug Fleenor Design, Inc.
Item# DFD-NODE-4
The Doug Fleenor Design NODE4 is an Ethernet to DMX interface. It accepts E1.31 sACN, draft sACN, Art-Net, Strand ShowNet, and KiNET. There are four fully isolated DMX ports. Each port can be configured as either an input or as an output. All of the data connectors can be mounted on either the front or rear panel. Their location can be changed in the field to accommodate fixed or touring installations. The factory default configuration covers most applications. An easy to use control panel...
Our Price: $1,253.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWCON XLR5BM IDC5 Q4 XLR 5-Pin Male B-Type DMX Connector - 4/Pack
Pathway Connectivity Solutions
Item# PWCONXLR5BMIDC5Q
Pathway Connectivity PWCON XLR5BM IDC5 Q4 XLR 5-Pin Male B-Type DMX Connector - 4/Pack! Features: XLR connectors feature rugged, Neutrik connectors "B" Type: Same high-quality connectors as their Data Receptacle Inserts (PWINS) and Rack-mount DMX/RDM Gateways and DMX Repeaters (PWPP RM and PWREP RM). Metal mounting flange with continuous ground contact for best EMC practice 5-pin XLR and Phoenix adapter connectors available, to mate up a pair of connectors on rack-mount Pathport Gateways...
Our Price: $195.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWPP DT P1 XLRF Pathport DMX Ethernet Gateway - Desktop - 1-Port - XLR 5-Pin Female
Pathway Connectivity Solutions
Item# PCS-PWPPDTP1XLRF
Pathway Connectivity PWPP DT P1 XLRF is a Pathport DMX Ethernet Gateway for Desktop with 1-Port, XLR 5-Pin Female. The Pathport® series of DMX-over-Ethernet Gateways are the heart of DMX distribution. Connect DMX512 control devices and send data over an Ethernet network to DMX512- capable end devices such as intelligent lighting fixtures, LEDs, Dimmers, and more. The port can be configured as an Input or Output as needed. Advanced features include extensive protocol support,...
Our Price: $860.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWGW DIN VD2 VIGNETTE 485 DIN-mount Architectural Gateway with 2 DMX Ports - 6.25-Inch
Pathway Connectivity Solutions
Item# PCS-PWGWDINVD2
The Pathway Connectivity PCS-PWGWDINVD2 Vignette DIN-mount Architectural Gateway provides connectivity for Vignette 485 wall stations (PWWSI V485) using a multi-drop serial data bus for recording and recall of lighting snapshots. The Gateway has four separate buses, accommodating up to 16 inserts. The Ethernet port provides connection back to the main lighting network and communication with the controller for recording snapshots. The device comes in a variety of configurations with...
Our Price: $1,020.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWRLYR16 SNAP DMX RELAY 0-10V DMX512 Lighting Control Panel - 16-Relays
Pathway Connectivity Solutions
Item# PCS-PWRLYR16
The Pathway PWRLYR16 SNAP Relay Lighting Control Panel provides unified DMX512 control of 0-10VDC outputs and relay switching in a single enclosure. Intended for use with LED drivers requiring mains switching and 0-10V dimming, and for electronic fluorescent ballasts, each SNAP Panel consists of 8 or 16 DMX-controlled relays and a 16-way 0-10VDC control interface. Each relay and each analog output can be patched to any DMX address, allowing you to control the outputs and relays interdependently...
Our Price: $2,825.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ADJ 4 Stream DMX Bridge 4-Universe Wireless DMX Controller
ADJ
Item# AMDJ-4ST100
The ADJ 4 STREAM DMX Bridge is a compact 4-universe wireless device which seamlessly bridges WiFi, Art-Net, sACN, and WiFLY (ADJ wireless DMX solution) signals to wirelessly control compatible DMX devices with control from the Airstream DMX Pro App for iPad. 4 STREAM DMX BRIDGE creates a private standalone 2.4 GHz DSSS (Direct Sequence Spread Spectrum) WiFi network, which coexists in busy RF environments alongside other wireless technologies. No existing network infrastructure is required,...
Our Price: $529.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ADJ Airstream 4-Channel WiFi Switch Bar DMX Controller
ADJ
Item# AMDJ-AIR314
The ADJ AIRSTREAM WIFI BAR is a wireless device that allows your iPhone or iPad to control the four outlets (ON/OFF) on the AIRSTREAM WIFI BAR. The AIRSTREAM WIFI BAR creates a private standalone WiFi network, no existing network infrastructure required. After connecting the AIRSTREAM WIFI BAR device to the AIRSTREAM WIFI iOS app wireless network, users can wirelessly switch the four outlets ON and OFF manually or automatically. The wireless frequency is 2.4 GHz and it...
Our Price: $179.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ADJ JOLT PANEL FX Multi-Use Strobe/Eye Candy Light Fixture with 848 LEDs & Zone Chasing - DMX In/Out
ADJ
Item# AMDJ-JOL140
The ADJ Jolt Panel FX is an innovative multi-use strobe / eye candy fixture. It is equipped with 800 0.3W RGB SMD LED for color strobing and eye candy effects, and 48 5W white SMD LED located in the center of fixture to create the traditional look of a strobe. Zone chasing control provides an eye candy effect when used together with the white LEDs. The Jolt Panel FX's massive light output is specifically designed for large stages, nightclubs, live events and touring. The rear panel has conveniently...
Our Price: $719.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ADJ LINK 4-Universe DMX Hardware Controller for use with iPad and ADJs Airstream LINK iOS APP
ADJ
Item# AMDJ-LIN556
The ADJ LINK is a 4-universe controller designed to control compatible DMX devices with control from the dedicated Airstream DMX LINK iOS App for iPad. LINK can connect to an IPad wirelessly or hardwired. When connected wirelessly, LINK creates a private standalone 2.4 or 5 GHz DSSS (Direct Sequence Spread Spectrum) WiFi network between an iPad and LINK console, which can coexist in busy RF environments alongside other wireless technologies. Connecting wirelessly will also allow you to undock...
Our Price: $999.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ADJ RFR044 RF Wireless Controller
ADJ
Item# AMDJ-RFR044
The ADJ RFC remote control has easy to use functions and clearly labeled buttons for a fast user response time. It's only compatible with specific ADJ products, please refer to the list in the Specifications. This RFC runs off of radio frequency and can run through built-in programs or even adjust lighting effects on the fly. Easily activate the sound active mode with the dedicated button. Adjust the flash rate or set the speed of the auto run with just one click! Add this product to your professional...
Our Price: $23.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ADJ Stage PAK 1 Stage Lighting System With DMX Control
ADJ
Item# AMDJ-STAGEPAK1
Complete your par can setup with by tying it all together with the Stage Pak 1 from ADJ. This package includes a quality constructed Stage Setter 8 DMX controller that offers you the ability to fully control the dimming and on/off of your par can setup via the two DP-415R dimmer switches/packs that are also included. The controller operates in 3 separate modes and offers a range of customization and built-in programs. The Dimmer Switches are 4-channel compact units offering the ability...
Our Price: $399.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ADJ DP-DMX20L 4 Channel DMX Dimmer Pack
ADJ
Item# DP-DMX20L
ADJ's DP-DMX20L is a 4 channel portable and universal DMX dimmer/switch pack. Each channel can individually be set to dim or switch and the pack can function as a one, two or four channel device. Using the packs digital display, the pack is quick and easy to set up. There are dual Edison sockets supplied so more than one effect can be connected to each channel. There are 16 built in chase sequences, with speed and intensity control, available for your convenience. This device...
Our Price: $234.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWCON XLR5BF IDC5 Q4 XLR 5-Pin Female B-Type DMX Connector - 4/Pack
Pathway Connectivity Solutions
Item# PWCONXLR5BFIDC5Q
Pathway Connectivity PWCON XLR5BF IDC5 Q4 Connector, Female 5 pin XLR, "B" Series w/ 5-position IDC connector block.4 pack!
Our Price: $195.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ARRI L2.0015900 Chimera Lantern for the S60 Skypanel Light - includes Skirt & Bracket
Arri
Item# ARR-L2-0015900
The ARRI L2.0015900 allows you to transform your SkyPanel S60 LED Softlight into an omni-directional light source with the Chimera Lantern skit. Easily attached to the front of the fixture, this lantern forms a balloon shape that throws light in nearly every direction. It also comes with a removable skirt that can be used to control light direction and spill. Additionally, mounting brackets are included for connecting the lantern to the light and the bank is made in the USA. Features:...
Our Price: $1,080.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Pathway Connectivity PWWSI V485 B4 Wall Station Insert - Vignette RS485 Master 4-Buttons - Black
Pathway Connectivity Solutions
Item# P700-5432BL
The Pathway Connectivity P700-5432BL Vignette is a system of modular button and slider wall station inserts that allow you to snapshot four universes of E1.31 sACN or one universe of DMX512. Design custom wall stations, from single-gang up to six-gang. Buttons can be press-and-hold to record, and press to play back. Sliders can act as grand master for the Vignette's output, or proportionately control user-defined zones with minimum and maximum values for individual channels. Playback and...
Our Price: $455.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Luminex LUMICORE Networked Lighting Universe Processor with 64 Discreet Processing Engines
Luminex
Item# LMX-LUMICORE
With 64 Built-In Engines, the LumiCore allows you to merge and route up to 64 x 4 input sources toward 64 newly defined universes. This way, LumiCore becomes the ideal solution to isolate your control setup on a festival, a theater or in a TV studio. As technology is evolving towards full networked solutions (ArtNet or sACN directly to the fixtures), LumiCore provides all the flexibility of the LumiNode directly on the network, with up to 256 input universes merged and routed...
Our Price: $5,161.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design DMX1REL20A Single Channel DMX512 Relay Pack for up to 20A Line Voltage
Doug Fleenor Design, Inc.
Item# DFD-DMX1REL20A
Doug Fleenor Design makes a series of Relay Packs that are controlled by DMX512. The DMX1REL20A is a single channel unit, designed to switch up to a 20 amp line voltage load, and uses a 30 amp relay. The unit is provided with two 18" 12/3 SJ pigtails for line-in and switched line-out. Supplied with 15 amp parallel blade connectors as standard, the unit may be wired with higher rating connectors by special order or may be rewired by the customer. Unit operates on 100-208V 50/60Hz,...
Our Price: $521.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
City Theatrical QolorFLEX 5810 24x3A Dimmer - DMX and RDM Compatible
City Theatrical Inc.
Item# CITYTH-5810
City Theatrical's QolorFLEX® 24x3A Dimmer (P/N 5810) is a low voltage, constant voltage, dimmer that is ideal for applications such as retail displays, signage, and general architectural work. It features 24 channels of control and is ideal for one-, two-, three- or four-color LED tape installations. This dimmer is fully DMX and RDM compatible and offers standalone functions. The QolorFLEX 24x3A Dimmer's maximum current load per channel is 3A with a Maximum Device Input of 72A. It...
Our Price: $340.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lex LDP1.8K 1800W Slim Dimmer Plus - DMX or Manual Control - 5-15
LEX Products Corp
Item# LEX-LDP1-8K
The Lex LDP1.8K Slim Dimmer Plus is a compact, feature-rich 1800W dimmer, which employs DMX512 communication. This dimmer can be controlled locally and used as a part of a location lighting kit to balance the lighting from several sources. It can also be controlled from a lighting console using DMX, and used to augment an entertainment lighting system. Application: Use one or more Slim Dimmer Plus to balance location lighting or to dim entertainment lighting. The Slim Dimmer can also...
Our Price: $1,471.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design 125EE-5 4 Output Enhanced Isolated DMX Splitter with 5-Pin XLR Connectors
Doug Fleenor Design, Inc.
Item# DFD-125EE-5
The Doug Fleenor Design Enhanced Isolated Splitter 125EE-5 includes all the features of our standard models with added protection to meet the needs of harsh operating conditions. As with our standard splitters, all outputs are isolated from the input and from the other outputs by optical couplers. Every output has its own power supply and line driver. For protection against electrical storms, the 125EE adds four transient absorbers on the input, two on each output, and one on the...
Our Price: $1,211.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lex Products 3123J-SP Two-Fer Junior 12/3 SJT 20 Amp 36 Inch Y Cable with Stage Pins 1 Male to 2 Female Bates Connectors
LEX Products Corp
Item# LEX-3123J-SP
The LEX Products 3123J-SP allows instruments to be plugged into a 20amp stage pin receptacle. Features: Meets NEC requirements specifically for stage and theatrical use Use of type SJT junior hard service cord results in a very flexible, compact product Overall assembly is UL listed and cUL listed specifically for theatrical and stage use Specifications: Rating: 20 Amp, 125 VAC, 2 Pole, 3 Wire Male Connector: 20 Amp, 125 VAC, 2 Pole, 3 Wire Stage Pin Cable: 12/3 SJTOW-A; Molded...
Our Price: $92.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
City Theatrical 5821 QolorFLEX 4 X 5A Dimmer
City Theatrical Inc.
Item# CTYTH-5821
The City Theatrical 5821 QolorFLEX® 4x5A Dimmer can control a full 20A of LED tape spread over four channels of 5A each. It uses constant voltage technology which ensures consistent full range dimming that is especially important at low end light levels. The unit is easily surface mounted and has spring contact terminal blocks for all electrical and data connections. It is designed to operate perfectly with City Theatrical QolorFlex LED tape, the LED tape of professionals on Broadway,...
Our Price: $119.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Pathway Connectivity PATHPORT Rack-Mount DMX/RDM Ethernet Gateway - RJ45 EtherCON - Rear Panel Connectors - 8-Ports
Pathway Connectivity Solutions
Item# PCS-P6426-IEC
The Pathway Connectivity PWPP RM P8 RJ45EC REAR-IEC Pathport series of DMX/RDM Ethernet Gateways are the heart of DMX distribution. Connect DMX512 control devices and send data over an Ethernet network to DMX512-capable end devices such as intelligent lighting fixtures, LEDs, dimmers, and more. Each port can be configured as an Input or Output as needed. Advanced features include extensive protocol support, slot-by-slot patching using multiple sources, cross-fading on priority change, and...
Our Price: $2,195.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lightronics IDP104 DMX Opto-isolation and Distribution Console
Lightronics
Item# LGT-IDP104
The IDP104 is an optically isolated DMX splitter with one DMX input and four independent DMX output circuits. Features: Accepts 1 DMX Signal Retransmits into 4 Separate DMX Drive Signals Optical Isolation Protected Outputs Provided with UL Listed Power Supply Specifications: Power Input: 13VAC, 600ma Output Signal: 4 DMX-512 Control Chains via 5 Pin XLRs Input Signal: DMX-512 Size: 5" x 2.5" x 5.5" (portable), 12" x 10" x 4" (wall mount) Weight: 2 Pounds (portable), 10 Pounds (wall...
Our Price: $300.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Doug Fleenor Design 125-TB DMX Splitter with One Input / Five Outputs and Terminal Blocks
Doug Fleenor Design, Inc.
Item# DFD-125-TB
The DMX splitter is available in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with miswiring and lightning protection, and a universal power supply is also available. Units with any number of inputs and outputs may be manufactured on a custom basis. Each output of the DFD-125-TB DMX Splitter is electrically isolated from the input, and from every other output, by 2500 volt optical couplers. Each output has its own line...
Our Price: $887.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Chroma-Q CQ678-8192 Vista DMX 8192-Channel License Dongle
Chroma-Q
Item# CHRQ-CQ678-8192
Designed to cope with the ever changing demands of modern shows, the award winning Vista software offers all the functionality of a full-size Vista console on your personal computer. Multiple license dongles can be used within a single system to achieve the sum of their individual channel counts. Upgradable, flexible, and unbelievably easy to use, try Vista free today by downloading the latest software. System Requirements: Windows 10 and Windows 11 (Pro...
Our Price: $8,095.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design DMX6REL30A Six Channel DMX512 Relay Pack with 2 - 15A Line In Pigtails
Doug Fleenor Design, Inc.
Item# DFD-DMX6REL30A
Doug Fleenor Design makes a series of Relay Packs that are controlled by DMX512. These six channel units are designed to switch up to 15 amp line voltage loads and use 30 amp relays. Line voltage input is on an 18" 12/3 SJ pigtail(s) fitted with 15 amp parallel blade plug(s). Model DMX6REL15A has one line in pigtail. Model DMX6REL30A has two line in pigtails (one for channels 1-3, one for channels 4-6). Switched line outputs are on chassis mounted 15 amp parallel blade receptacles....
Our Price: $794.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ARRI L2.0022690 SkyPanel Remote with 5m USB Cable and Case
Arri
Item# ARRI-L2-0022690
Inspired by the requests of users, the ARRI SkyPanel Remote adds new flexibility and ease-of-use for the popular SkyPanel line of luminaires. This handheld remote connects to any SkyPanel via a USB cable and allows for full control of the fixture remotely. This is particularly useful if the SkyPanel is high up on a light stand or in a position where the onboard control panel is difficult to access. Use multiple SkyPanel softlights in a master / slave configuation to control them with one...
Our Price: $350.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lightronics AS40D Portable Dimmer
Lightronics
Item# LGT-AS40D
The AS40D is a compact portable 4 channel light dimmer. It has a maximum capacity of 600 Watts per channel and a maximum TOTAL load capacity of 2400 Watts. It is supplied with an input power cord which may be connected to a 120 VAC, 20 Amp power circuit. The unit operates using the USITT DMX-512 protocol. The AS40D may be operated in a relay (non-dim) mode. The unit will also function as a stand alone chaser and has eight primary preset chase patterns which may be used. Features: 4 Channels 600W...
Our Price: $300.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ADJ DMX Operator Intelligent Controller
ADJ
Item# AMDJ-OPERATOR
ADJ's DMX Operator Controller has 12 individual fixture buttons which allow you to control up to 12 separate intelligent lighting fixtures of up to 16 DMX channels each. With ADJ's DMX Operator Controller, you can record up to 6 chases with separate fade times and step speeds. The 8 individual channel faders provided you with easy controllability of any DMX512 moving light. Features: Control up to192 DMX channels 12 individual fixture channels - Control up to 12 separate intelligent lights...
Our Price: $159.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Chauvet DJ ILSCOMMAND Powerful ILS Controller Capable of Programing any ILS-enabled Products
Chauvet DJ
Item# CHVT-ILSCOMMAND
ILS - the Integrated Lighting System makes creating a synchronized light show across different fixture types fast and easy without DMX. Now the ILS universe is at your command with ILS Command, a powerful controller capable of programing any ILS-enabled product. This hardware controller has a built-in D-Fi transmitter that wirelessly controls an unlimited number of ILS-enabled fixtures. Enjoy unlimited creativity as you customize, save and recall presets even in dark environments where...
Our Price: $299.99
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Doug Fleenor Design DMX512 521E-5 Five Inputs to One Output DMX Combiner on Isolated 5 Pin XLR
Doug Fleenor Design, Inc.
Item# DFD-521E-5
The DMX512 521E-5 by Doug Fleenor Design is a Five Input to One Output DMX Combiner on Isolated Neutrik 5 Pin XLR. Enhanced Combine Units from Doug Fleenor Design solve the problem of combining multiple DMX input signals into a single DMX output signal. The most common configuration of the unit allows two consoles to control a single set of dimmers in a highest takes precedence or pile on mode. Examples of where this might be necessary include booth console/stage manager's console, primary...
Our Price: $3,742.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lightronics AR602 Unity Architectural Dimmer
Lightronics
Item# LGT-AR602
Flexible, powerful, and affordable, this easy to install and use architectural system is equally at home in churches, schools, theaters, hotels, etc. The AR602 is a 6 channel x 2400 Watts per channel dimmer. It accepts DMX-512 signals and allows remote station control of preset scenes. The unit operates from either single or three phase power. The highly versatile AR602 may utilize remote stations to activate specific user programmed scenes pre-stored in the unit. Several various remote types may...
Our Price: $2,081.25
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Doug Fleenor Design PRE10-A-POPO DMX512 Architectural Playback Device - Up To 10 Snapshots and Push-on Push-Off Software
Doug Fleenor Design, Inc.
Item# DFD-PRE10-A-POPO
The Doug Fleenor Design PRE10A-POPO offers ten HTP presets. Each of these ten HTP presets are capable of being turned ON or OFF individually. Preset 10 Architectural is a lighting control station capable of storing up to ten presets. These presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned a unique fade time, from 0 to 999 seconds. Presets are recalled by pressing one of the buttons. Systems can be created by using one or more stations...
Our Price: $639.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
City Theatrical 6690-1 End Caps for Aluminum Extrusion used with QolorFLEX LED Tape - 10 Pack
City Theatrical Inc.
Item# CITYTH-6690-1
City Theatrical 6690-1 are a 10-pack of end caps with hole for 6690 Extrusion.
Our Price: $7.29
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
City Theatrical 45 Degree Aluminum Extrusion used with QolorFLEX LED Tape - 6.56ft/2 Meter
City Theatrical Inc.
Item# CITYTH-6693
City Theatrical offers many LED tape accessories for their QolorFLEX® LED Tape line to help make installations easier, including ribbon cables, mounting clips, connectors, extrusions, diffusers, and more. The Aluminum Extrusion, 45°, 2m (P/N 6693) is an aluminum extrusion that is ideal for cove lighting, wall washes, foot lighting when paired with the Diffuser, 2m (P/N 6694) mounted over one of the 40+ QolorFLEX LED Tape models, as well as numerous LED tape brands. City Theatrical...
Our Price: $51.79
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
City Theatrical Diffuser for 45 Degree Extrusion used with QolorFLEX LED Tape - 6.56ft/2 Meter
City Theatrical Inc.
Item# CITYTH-6694
City Theatrical offers many LED tape accessories for their QolorFLEX® LED Tape line to help make installations easier, including ribbon cables, mounting clips, connectors, extrusions, diffusers, and more. The Aluminum Extrusion, 45°, 2m (P/N 6693) is an aluminum extrusion that is ideal for cove lighting, wall washes, foot lighting when paired with the Diffuser, 2m (P/N 6694) mounted over one of the 40+ QolorFLEX LED Tape models, as well as numerous LED tape brands. City Theatrical...
Our Price: $22.42
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
City Theatrical 6695 Diffuser for Low Profile Extrusion used with QolorFLEX Led Tape - 2 Meter
City Theatrical Inc.
Item# CITYTH-6695
City Theatrical's 6695 low profile aluminum extrusion paired with their diffuser is ideal for use with City Theatrical's QolorFLEX® LED Tape and numerous LED tape brands. With the low-profile extrusion this is great for our lower and medium power LED tapes, such as RGB, RGBA, RGBW, and RGBI. Features: Ultra-thin aluminum extrusion profile for both recessed and surface mount LED lighting projects 12.2mm inner width to accommodate all kinds of 8-10mm LED strip lights Oyster white...
Our Price: $19.68
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
City Theatrical 5673 Terminal Block Connector/Four Pin for QolorFLEX - Male
City Theatrical Inc.
Item# CTYTH-5673
The City Theatrical 5673 Terminal Block Connector is a 4 pin male mating extension terminal block connector for cable assemblies. City Theatrical offers many LED tape accessories for our QolorFLEX LED Tape line to help make installations easier, including ribbon cables, mounting clips, extrusions, diffusers, connectors, and more.
Our Price: $3.93
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
City Theatrical 5674 Terminal Block Connector/Four Pin for QolorFLEX - Female
City Theatrical Inc.
Item# CTYTH-5674
The City Theatrical 5674 Terminal Block Connector is a 4-pin female terminal block connecter for cable assemblies. City Theatrical offers many LED tape accessories for our QolorFLEX LED Tape line to help make installations easier, including ribbon cables, mounting clips, extrusions, diffusers, connectors, and more.
Our Price: $3.93
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
City Theatrical 5910 Wireless DMX Multiverse Transmitter 900MHz/2.4GHz - Licensed in North America Only
City Theatrical Inc.
Item# CTYTH-5910
3 Frequencies Available
The Multiverse® Transmitter (5910) opens a new world in wireless DMX/RDM. Its Ethernet input allows it to take in Streaming ACN (sACN) or Art-Net and to transmit between eight and 10 user-selectable universes of DMX/RDM, depending on the type of Multiverse Transmitter product used, with the ability to use less radio energy than a present day single universe wireless DMX transmitter. The Multiverse Transmitter has a Bluetooth radio receiver built in that allows it to communicate with...
Read More
Our Price: $2,175.07
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List

Lighting Control & DMX Systems can be found in studios and on stages all across the world. Markertek stocks simple lighting dimmers, ultra high-end architectural solutions and everything in between for stage & studio. We stock important accessories like stage pin connectors, DMX cables & terminators, wired and wireless controllers, optical splitters and more! If you need specialized Lighting Control & DMX-512 to LMX-128 converters, you have come to the right place. Markertek is proud to carry hard to find Lighting Control & DMX Systems from brands like ADJ, Doug Fleenor Design, Leprecon, Elation and Chauvet DJ.

Sign In

Lighting Control & DMX Systems

Narrow Products

By Brand

By Price Range

Filter By