Equipment Rackmounts

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Ross OGX-FR-CN openGear 2RU oGx Frame with Cooling and Advanced Networking
Ross Video
Item# ROSS-OGX-FR-CN
Ross OGX-FR-CN is an openGear OGX Frame with cooling and Advanced Networking. Our Emmy-winning openGearr platform, OGx, adapted to UHD and IP infrastructures. openGear reafiirms its promise of delivering freedom of choice, which is even more relevant today.The OGX-FR frame comes standard with Ethernet connectivity for basic configuration and monitoring of openGear® cards through the DashBoard control system. The advanced networking card, the MFC-OG3-N, adds an on-board Gigabit Ethernet...
Our Price: $2,677.00
Availability: In Stock
Add to Wish List
Ross OGX-FR-C openGear OGX Frame with Cooling
Ross Video
Item# ROSS-OGX-FR-C
Ross OGX-FR-C is an openGear OGX Frame with cooling. The OGX-FR frame comes standard with Ethernet connectivity for basic configuration and monitoring of openGear® cards through the DashBoard control system. Features: Frame for openGear Cards. Modular Rear (I/O Modules not included) Can mix and match any signal types with appropriate Rear Modules 20 openGear card slots, 1 controller slot, and 1 reference slot
Our Price: $1,956.00
Availability: In Stock
Add to Wish List
Ross OGX-FR-CNS openGear OGX Frame with Cooling - Advanced Networking & SNMP
Ross Video
Item# ROSS-OGX-FR-CNS
Ross OGX-FR-CNS is an openGear OGX Frame with Cooling, Advanced Networking & SNMP. The OGX-FR frame comes standard with Ethernet connectivity for basic configuration and monitoring of openGear® cards through the DashBoard control system. The advanced networking card with SNMP, the MFC-OG3-N, adds an on-board Gigabit Ethernet switch, with GigE access to each of the 20 processing card slots. Features: Frame for openGear Cards. Modular Rear (I/O Modules not included) Can mix and match...
Our Price: $3,192.00
Availability: In Stock
Add to Wish List
AJA OG-X-FR OpenGear-Compatible 2RU Rackframe
AJA Video
Item# AJA-OG-X-FR
The AJA OG-X-FR is a 2RU high openGear frame which is compatible with any openGear card and offers Dashboard support for the latest AJA Dashboard compatible openGear cards (cards sold separately). The frame has a 20-slot capacity with excellent cooling capabilities for high-density applications and compatibility with advanced openGear connectivity options for supported cards. openGear is an open-architecture, modular frame system designed by Ross Video and supported by a diverse range...
Our Price: $1,956.00
Availability: In Stock
Add to Wish List
My Custom Shop BLACKSTACK-10RM 3RU High Density Universal Blackmagic Design Mini Converter Rackmount
My Custom Shop
Item# BLACKSTACK-10RM
The BLACKRACK and BLACKSTACK series rackmounts from My Custom Shop are designed to work with Blackmagic Design Mini Converters. These quality rackmounts are proudly built by My Custom Shop in the USA, and allow multiple Mini Converters to be easily rackmounted in a 3RU space. Features: Includes Mounting Hardware 3RU Mounts up to 10 Mini Converters High Density Professional Rack Mount Solution Applications include News gathering, Sports production, Remote productions, Live events, and OB Trucks Thumb...
Our Price: $156.49
Availability: In Stock
Add to Wish List
ToteVision LED-504HDMx3 Rack-mounted Triple 5 Inch LCD Monitors
ToteVision
Item# TOV-LED-504HDMX3
The LED-504HDMX3 are three 5" LCD monitors housed together in a rack mount featuring the latest screen imaging technology for enhanced clarity and sharpness. Both mega-pixel digital and high resolution line analog video will benefit by being viewed on these monitors. Features: LED backlight provides a brighter picture using less power Loop-through HDMI and Composite (CVBS) Connections Multiple features include Pixel to Pixel, Center Marker (80%, 85%, 90%, 93%, 96%, 2.35:1), Image...
Our Price: $689.50
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Lynx RFR-1200 High Power Yellobrik 19 Inch 1RU Rack Frame
LYNX Technik Inc
Item# LNX-RFR-1200
The RFR 1200 is a compact 1 RU high mounting frame designed for yellobriks. Up to 14 yellobriks can be mounted vertically and mechanically clamped in place. Each slot has its own integrated power connector on a central power bus which can supply up to 200W of power total. The rack has two external 12VDC inputs for power. If the total of all connected devices stays below 100W, "Power 1" will be for primary power, "Power 2" for redundant backup. In high power mode both power supplies are...
Our Price: $494.00
Availability: In Stock
Add to Wish List
My Custom Shop BLACKRACK-2 Universal Mini Converter Rackmount
My Custom Shop
Item# BLACKRACK-2
Originally designed with the AJA FIDO series in mind, the folks at My Custom Shop have come up with a simply brilliant way to rackmount almost any mini converter with the BLACKRACK-2. It allows you to mount up to 16 mini converters from multiple brands in vertical, side-by-side fashion with high-density in mind. Of course, horizontal mounting is also an option if high-density needs aren't a factor. The mounting slots of the BLACKRACK-2 deliver 3 possible installation options:...
Our Price: $124.49
Availability: In Stock
Add to Wish List
ADDER RMK8 Rack Mount for ADDERLink XDIP/ XD150/ XD150FX/ipeps+ and ADDERView DDX USR
Adder Corporation
Item# ADR-RMK8
The ADDER RMK8 rackmount for side by side mounting of two ADDERLink® XDIP, ADDERLink XD150, ADDERLink XD150FX, ADDERView® DDX USR or ADDERLink ipeps+. ADDER® Rackmount Kits are designed to enable easy installation within the rack environment. Specifications:
Our Price: $202.50
Availability: In Stock
Add to Wish List
AJA DRM2 3RU Mini-Converter Rackmount Frame with 200W Power Supply and Passive Faceplate
AJA Video
Item# AJA-DRM2-R0
DRM2 is a 3RU rackmount frame to professionally mount, power, and support up to twelve AJA Mini-Converters of any current size/form factor. This rackmount frame will deliver enough power to support any currently available AJA Mini-Converter, with a total power delivery of up to 200 Watts, 100-240V 50/60Hz. The DRM2 ships with a standard passive faceplate. DRM2-AP ships with an actively cooled faceplate, enabling use with the higher wattage Mini-Converters or in higher ambient temperature...
Our Price: $1,295.00
Availability: In Stock
Add to Wish List
Theatrixx XVVRF8 8-Bay Reversible Converter - Empty Frame with Dual PSUs - 3RU
Theatrixx Technologies Inc
Item# TTX-XVVRF8
The Theatrixx 8-Bay Reversible Converter system is the natural extension of the award-winning xVision Converter line, now available in a modular rackmount format with the same processing quality and reliability that is the hallmark of the xVision brand. In a continuous effort by Theatrixx to eradicate unprofessional wall-warts from our industry, the modular design allows each system to be configured exactly as needed, and even reconfigured on-the-fly, with a host of modules available, featuring...
Our Price: $1,425.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Lumantek RACK EZ Converter Rack Mount
Lumantek
Item# LMTK-LUM-RACK
The Lumantek RACK EZ Converter Rackmount allows you to hold up to ten Mini and ez-Converters in a 2-3 RU rack-mountable unit. The Rackmount features two power supplies. This unit is compatible with all Lumantek Converters. You can fill this rackmount with up to 10 converters. Install your converters ahead and simply carry them as a rack type device. All LUMANTEK converters fit right in. Features: Holds up to 10 Units Dual Power Supplies 2-3 RU Design Specifications: Rack Unit Space:...
Our Price: $399.00
Availability: In Stock
Add to Wish List
ADDER RMK15 Rackmount Kit for ADDERLink XD600 Series
Adder Corporation
Item# ADR-MK15
The RMK15 is a rackmount kit designed for use with the ADDERLink® XD600 series. RMK15 can hold up to 2 x ADDERLink XD600 series units. It is a tray designed to allow easy or quick installation and removal with shelf space for mounting PSUs and cable management.
Our Price: $103.00
Availability: In Stock
Add to Wish List
Cobalt Digital OGX-FR-C-P 20 Slot openGear Frame with Cooling
Cobalt Digital
Item# CB-OGX-FR-C-P
The OGX-FR-C-P is an oGx open gear frame with cooling. The oGx is a 2RU high-density openGear® modular frame offering 600 Watts of total power in a high-capacity 20-slot format. It uses the same form factor and DashBoard™ remote control as Cobalt's other 20-slot frames and supports all openGear compatible cards and rear I/O modules, but offers significantly more available user power. The oGx is designed to meet the demands of today's most complex IP and hybrid infrastructures,...
Our Price: $1,956.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Artel InfinityLink IL6000 1 RU 4 Slot Media Transport Chassis with Management / Routing and Dual AC Power Supplies
Artel Video Systems
Item# ARTL-IL6000
InfinityLink provides broadcast-quality transport of video, audio, and data across IP- and fiber-based networks and optical backbones in an integrated modular solution leveraging Artel's 30 years of media transport experience. Designed specifically to meet the unique requirements of broadcast video transport, InfinityLink features a 4-slot, 1-RU chassis; multi-purpose, single-piece function modules with front panel accessible status LEDs and video monitor ports; and external optics in all standard...
Our Price: $1,967.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
AJA DRM 2RU Rackmount Frame for Mini-Converters
AJA Video
Item# AJA-DRM
The AJA DRM is a 2RU high frame that can accommodate up to 12 of the smaller AJA Mini-Converters (D4 - D5 series and others of the same size), up to 6 of the larger AJA Mini-Converters (D10 or HD10 series), or a mixture of both. The DRM has a built-in 110/220V power supply with 12 connectors to provide 5V power directly to the Mini-Converters without the need for individual power supplies for each Mini-Converter. Please Note: Due to size and power requirements, AJA's...
Our Price: $749.00
Availability: In Stock
Add to Wish List
ADDER RMK12 Rackmount Kit for ALIF4000 Series
Adder Corporation
Item# ADR-RMK12
The Adder RMK12 is a 19 inch 1U rackmount kit for 2 x ADDERLink INFINITY 4000 Series units like the ALIF4001R-US (sold separately). It is a tray designed to allow easy or quick installation and removal with shelf space for mounting PSUs and cable management. In order to maintain suitable cooling airflow, if a single module is installed within the rack mount it's recommended to install the optional RMK12-BP blanking plate (sold separately). ADDER™ rackmount products are designed to...
Our Price: $173.70
Availability: In Stock
Add to Wish List
Cobalt Digital PS-OGX openGear Frame Redundant Power Supply
Cobalt Digital
Item# CB-PS-OGX
The PS-OGX- is a redundant power supply for the oGx open gear frame. The oGx is a 2RU high-density openGear® modular frame offering 600 Watts of total power in a high-capacity 20-slot format. It uses the same form factor and DashBoard™ remote control as Cobalt's other 20-slot frames and supports all openGear compatible cards and rear I/O modules, but offers significantly more available user power. The oGx is designed to meet the demands of today's most complex IP and hybrid...
Our Price: $891.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ADDER RMK17 Rackmount Kit for ALIF2102Tand ALIF2122T Series
Adder Corporation
Item# ADR-RMK17
The ADDER RMK17 is a rackmount kit designed for use with the ADDERLink® INFINITY 2102T. The RMK17 can hold up to 3 x ADDERLink INFINITY 2102T units. It is a tray designed to allow easy or quick installation and removal with shelf space for mounting PSUs and cable management. This can also be used in combination with the RMK17-BP which is a blanking plate product, sold as a kit of 2 blanking plates, to either block one side of the rack tray or both depending on the number of units...
Our Price: $174.25
Availability: In Stock
Add to Wish List
DNF Controls EB4X-RP 1RU Mounting Panel
DNF Controls
Item# DNF-EB4X-RP
The EB4X-RP is a Rackmount Panel for the EB-44 series of IP Control switches. The panel can hold up to 3 EB-44 units within your rack system. Features: Specifications: Height: 1 RU Number of Controls: up to 3
Our Price: $114.71
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
My Custom Shop BLACKRACK-1 1RU Universal Blackmagic Design Mini Converter Rackmount
My Custom Shop
Item# BLACKRACK-1
The BLACKRACK and BLACKSTACK series rackmounts from My Custom Shop are designed to work with Blackmagic Design Mini Converters. These quality rackmounts are proudly built by My Custom Shop in the USA, and allow multiple Mini Converters to be easily rackmounted in a single 1, 2 or 3RU space. Features: Includes Mounting Hardware 1RU Mounts up to 4 Mini Converters Adjustable Rails for Flush or Recessed Mounting Fits all standard (non heavy duty series) Blackmagic Mini Converters Including...
Our Price: $89.49
Availability: In Stock
Add to Wish List
RTS MCP-2 Single Rackmount Kit for SSA-324/SSA-424
RTS Intercoms
Item# RTS-MCP-2
Rackmount kit for one main (modular style) component. Mounting brackets are the key to the RTS modular user station design concept. By choosing the appropriate mounting kit individual user stations can be combined in numerous configurations to meet virtually any communications need. All mounting kits are engineered and built for rugged durability. All-metal construction and attention to mechanical design details make all of the RTS mounting kits a worry-free choice for years to come.
Our Price: $200.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Aurora RK2-1-K 1RU Dual Rack Mounting Kit for VLX-TC1 - Fits up to Two VLX-TC1 Units in a Single Rack Space
Aurora Multimedia
Item# AURA-RK2-1-K
Aurora RK2-1-K 1RU Rack Mount Kit that Holds 12 Units - Includes 24 Rails & 6 Blanks and is Compatible with the VLX-TC1-CF, IPX-TC3A, IPX-TC3A-Pro, HT-TC1-Pro, and RXC-3.
Our Price: $118.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Phabrix PHQXK1 19 Inch Rack Mount Kit - Fits one Single PHQX - PHQX01/01E or one PHQX01/E-IP
Phabrix
Item# PHQXK1
The Phabrix PHQXK1 is a 19 inch rack mount kit that fits either one PHQX01/01E or one PHQX01/E-IP HDR Generation, Analysis & Monitoring unit. Features: Specifications:
Availability: Typically Ships in 3-10 Business Days
Item Details
ADDER RMK4S Single 1U Rackmount Kit for ADDERLink INFINITY/ADDERView CATx 1000/ CATxIP 1000/CATxIP 5000
Adder Corporation
Item# ADR-RMK4S
The ADDER RMK4S is a Single 1U Rackmount Kit for the ADDERLink® INFINITY® range, ADDERView® CATx 1000 (8 and 16 port), ADDERView CATxIP 1000 (8 and 16 port) and ADDERView CATxIP 5000. ADDER® Rackmount Kits are designed to enable easy installation within the rack environment. Specifications:
Our Price: $78.30
Availability: In Stock
Add to Wish List
Datavideo RMK-2 Rack Mount Solution for DAC Converters and VP-597
Datavideo
Item# DV-RMK-2
Our new RKM-2 19" Rack Mount for DAC Converters also accommodates the VP-597, so you can easily mount it alongside the DACs in your rack system. Features: Specifications:
Our Price: $329.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
RDL MB-3 Kit to Mount ST and TX Series Modules on FP Panel
Radio Design Labs
Item# RDL-MB3
TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.
Our Price: $7.09
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ADDER RMK4D-R2 Dual Rackmount kit for ADDERLink INFINITY/ADDERView CATx 1000/CATxIP 1000/CATxIP 5000
Adder Corporation
Item# ADR-RMK4D-R2
The ADDER RMK4D-R2 is a rackmount kit suitable for two ADDERLink® INFINITY®, ADDERView® CATx 1000 (8 and 16 port), ADDERView CATxIP 1000 (8 and 16 port) and ADDERView CATxIP 5000. Adder Rack Mount Kits are designed to enable easy installation within the rack environment. Features: Specifications:
Our Price: $117.00
Availability: In Stock
Add to Wish List
Allen & Heath AH-AB-168-RK19 Optional Rack Mount Kit for AB168/DX168/DT168
Allen & Heath USA
Item# AH-AH-AB-168RK19
Allen & Heath AH-AB-168-RK19 is an optional rack mount kit for the AB168, DX168, or DT168.
Our Price: $109.99
Availability: In Stock
Add to Wish List
Digital Audio Denmark CORERACK 19-Inch Rack Mount and Shelf for DADCORE256 & MacMini
Digital Audio Denmark
Item# DAD-CORERACK
Digital Audio Denmark CORERACK is a 19-Inch Rack Mount and Shelf for DADCORE256 & MacMini. Please Note! DADCORE256 sold separately.
Our Price: $199.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Barix 19 Inch Rack Mount
Barix
Item# BARIX-19RM
Accessory to mount Barix audio devices in a standard 19" rack. Supports up to four Barix ¼ width audio devices: Annuncicom 60 Annuncicom 100 Annuncicom 200 Exstreamer 1xx Exstreamer 2xx Instreamer Supports up to two Barix ½ width audio devices: Annuncicom 1000 Exstreamer 500/1000 Supports mixing of different devices with different widths (e.g. one ½ width plus two ¼ width device) Specifications: MaterialAluminum 6061 Thickness: 0.118” / 3 mm Surface: sand blasted and anodized Dimensions...
Our Price: $160.00
Availability: In Stock
Add to Wish List
Studio Technologies RMBK-11 Rack-Mount Installation Kit for One Model 48D Dante Bridge Unit
Studio Technologies Inc.
Item# STCH-RMBK-11
The Studio Technologies RMBK-11 rack-mount front panel is used for mounting one Model 48D Dante Bridge unit or one Model 5421 Dante Intercom Audio Engine unit into one space (1U) of a 19-inch equipment rack.
Our Price: $78.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Riedel RMK-001 Rack Mount Kit for 1 or 2 Half 19 Inch Devices
Riedel Communications Inc.
Item# RMK-001
The Riedel RMK-001 is a Rack Mount Kit for 1 or 2 NSA-002A Half 19 Inch Devices Features: 1RU rack mount kit For one or two NSA-002A half 19'' devices
Availability: Typically Ships in 3-10 Business Days
Item Details
Allen & Heath AH-CQ12T-RK19 19-Inch Rackmount Kit for CQ-12T
Allen & Heath USA
Item# AH-CQ12T-RK19
Allen & Heath AH-CQ12T-RK19 rack ear kits are available for installation of the CQ-12T into a standard 19" rack. CQ-12T sold separately.
Our Price: $79.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
StarTech WALLMOUNT6 6RU Wall Mount Network Rack - 14 Inch Deep - with 19in Patch Panel Bracket - 44lb Capacity - Black
Startech.com
Item# ST-WALLMOUNT6
The StarTech WALLMOUNT6 6RU 13.78 in. Deep Wall Mounting Bracket for Patch Panel delivers a sturdy and dependable equipment storage option, allowing you to wallmount equipment for a more efficient and accessible operating environment. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall. Applications Wall mount patch panels and other slim 19in rackmount equipment Features: 6RU Wall Mount Rack: This...
Our Price: $66.13
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Nixer NIX00538 Desk Stand for PD DANTE
Nixer Pro Audio
Item# NPA-NIX00538
The Nixer NIX00538 is for the PD Dante. This deskstop bracket (pair) allows the PD Dante to be used on a desktop at either 30° or 60°.
Our Price: $109.00
Availability: In Stock
Add to Wish List
Barix Mounting Bracket for Ex-/Instreamer Devices
Barix
Item# BARIX-MB
Barix accessory for Ex-/Instreamer devices, which can be used to secure the devices within their operating environment. Suitable for use with all Barix ¼ 19" rack width audio devices:Exstreamer 1xx, 2xx / Instreamer / Annuncicom 60, 100, 200 Can be used in conjunction with Moxa DK-35A, to enable devices to be DIN rail mounted Manufactured from a single piece of black colored PC plastic Features: Manufactured from a single piece of black colored PC plastic Specifications: Barix accessory for Ex-/Instreamer...
Our Price: $12.00
Availability: In Stock
Add to Wish List
BirdDog BD4KRM 4K Rackmount - Mount Two 4K Encoders/Decoders in 1RU
BirdDog
Item# BDS-BD4KRM
The BirdDog BD4KRM 4K Rackmount securely holds up to two BirdDog 4K NDI encoders/decoders in a 1 RU rack. These include the BirdDog 4K HDMI, 4K SDI, and Quad. It's especially ideal for mounting two BirdDog 4K Quad units, as you'll have eight 4K60 NDI channels at your fingertips in one rack. Features: Holds Two 4K NDI Units in 1 RU Rack Fits BirdDog 4K HDMI, 4K SDI, and Quad Specifications: Package Weight: 1.98 Lbs Dimensions: 19.3 x 5.5 x 2 Inches
Our Price: $89.95
Availability: In Stock
Add to Wish List
Studio Technologies RMBK-13 Center Rack-Mount Installation Kit for One 1/2 Rack Unit
Studio Technologies Inc.
Item# STCH-RMBK-13
This Center Rack-Mount Installation Kit for One "1/2-Rack" Unit is used for mounting one specific "1/2-rack" product into one space (1U) of a 19-inch equipment rack. Each unit will be located in the center of the 1U opening. This installation kit is used for mounting one of the following "1/2-rack" products into one space (1U) of a 19-inch equipment rack. Each unit will be located in the center of the 1U opening. Model 48D Dante Bridge Model 544D Audio Interface Model 545DC Intercom Interface Model...
Our Price: $78.00
Availability: In Stock
Add to Wish List
ADDER RMK9 Rack Mount Kit for CCS-PRO4
Adder Corporation
Item# ADR-RMK9
The ADDER RMK9 is a Rack Mount Kit for the ADDER CCS-PRO4. ADDER rackmount kits are designed to enable easy installation within the rack environment. Features: Specifications:
Our Price: $74.70
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ADDER RMK10 Rack Mount Kit for ADDERLinkXDIP/XD150/XD150FX/ADDERView DDX USR and ipeps+
Adder Corporation
Item# ADR-RMK10
The ADDER RMK10 is a desk or wall mount kit for ADDERLink® XDIP, ADDERLink XD150, ADDERLink XD150FX, ADDERView® DDX USR and the ADDERLink ipeps+. ADDER mounting products, including rackmount kits and desk or wall mount kits, are designed to enable easy installation within your chosen environment Features: Specifications:
Our Price: $67.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Studio Technologies MBK-02 Mounting Bracket Kit for Interface Models 5202/5204/5205 and Model 208
Studio Technologies Inc.
Item# STCH-MBK-02
The Studio-Tech MBK-02 Mounting brackets and hardware for mounting one Model 208, 5202, 5204, or 5205 unit to a flat surface. Appropriate for wall, top or bottom of desk or broadcast set, or other appropriate surfaces. Kit includes two black anodized aluminum brackets, four screws, and four lock washers.
Our Price: $32.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Ross CB-SOLO-DESKMOUNTKIT Desk Mount Kit For Carbonite Black Solo/CB9 Or All-In-One Control Panels
Ross Video
Item# ROSS-CBSOLO-DMK
Ross CB-SOLO-DESKMOUNTKIT is a Desk Mount Kit for the Carbonite Black Solo/CB9 Panel (panel sold separately). This kit is for a secure in-desk or on-desk installation of the Carbonite Black Solo Panel. Features: Useful for tray mount kits in flight packs Includes adjustable L brackets and thumb lock screws
Our Price: $61.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Bolin Technology BL-DR-P DIN Rail Mount Kit for Bolins HDBaseT Receiver (BL-BR4K-1) and POE Power Injector (BL-PP97)
Bolin Technology
Item# BOL-BL-DR-P
Bolin Technology BL-DR-P is a din rail mount kit for use with Bolin HDBaseT Receiver and POE Power Injector (Bolin's HDBaseT Receiver (BL-BR4K-1) and POE Power Injector (BL-PP97). The mount works with Din Rail (Top hat rail IEC/EN 60715, known as TS35 rail in USA). The mounting bracket includes three parts: (2) for the body mount and (1) for Din-Rail mount. Supports vertical or horizontal mounting orientation. Please Note: Din-Rail trail is not provided, it is standard trail...
Availability: In Stock
Item Details
ADDER RMK12-BP Blanking Plate for RMK12 ALIF4000 Rackmount
Adder Corporation
Item# ADR-RMK12-BP
The ADDER RMK12-BP is an optional blanking plate for the RMK-12 rack mount for the ALIF4000 series, like the ADR-ALIF4001R-US. In order to maintain suitable cooling airflow, if a single module is installed within the rack mount it's recommended to install an optional blanking plate like the RMK12-BP. Note: The outer edge of the blanking plate needs to overlap the ears of the rack mount itself, so you need to either install the blanking plate before the tray is installed...
Our Price: $22.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ZeeVee ZVPRO RACK KIT Rack Mount Ears
ZeeVee
Item# ZV-PRORACKKIT
The ZeeVee ZVPRK ZvPro Rack Kit is a rack ear kit for the ZvPro Series 600 and ZvPro Series 800 HD Encoder Modulators. Includes Qty 2 Rack Mount Ears for ZvPro family and 8 Mounting screws. Features: Compatible with ZvPro Series 600 and ZvPro Series 800 HD Encoder Modulators Kit includes 2 rack mount ears and 8 mounting screws Specifications: Device Supported: Video Encoder Compatibility: ZeeVee ZvPro Series HD Encoders Unit Dimensions::...
Our Price: $40.55
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Atlas ATPLATE-052 Attenuator Rack Mounting Plate Holds up to 6 Attenuators
AtlasIED
Item# ATPLATE-052
Atlas Sound ATPLATE is perfect for rack mount applications where attenuators are required. The Atlas Sound ATPLATE, a 2RU high #14 gauge plate pre-punched to accommodate up to (6) Atlas Sound RM attenuators. Attractive black filler plugs are provided for applications where the ATPLATE will not be fully loaded. Please note that dial scales are included with Atlas Sound RM series attenuators, however for convenience, (6) additional dial scales are included with the ATPLATE. This allows the contractor...
Our Price: $36.99
Availability: In Stock
Add to Wish List
NTI MK-PWRRMTRBTLC Optional Wall and DIN Rail Mounting Kit for PWR-RMT-RBT-LC Power Reboot Switch
Network Technologies Inc
Item# MK-PWRRMTRBTLC
The NTI MK-PWRRMTRBTLC is an optional mounting kit for the PWR-RMT-RBT-LC Power Reboot Switch (items sold separately). PWR-RMT-RBT-LC is suitable for desktop or shelf mounting as shipped but this mounting kit is available for wall and DIN rail mounting if desired.
Our Price: $15.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ADDERLink ALAV-RMK-FASCIA2 ALAV 200 Series 204T/208T Fascia Mounting Plate for RMK-CHASSIS
Adder Corporation
Item# ADR-ALAVRMKFASC2
The ADDERLink ALAV-RMK-FASCIA2 is a rack mounting plate for attaching AdderLink AV Series 204/208T extenders to the RMK-CHASSIS (sold separately). One plate needed for each extender. Features: Specifications:
Our Price: $25.20
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Aurora IPA-SFP-10G20 10Gbps SFPplus LC Duplex Singlemode 1310nm Module 20KM
Aurora Multimedia
Item# AURA-IPASFP10G20
Aurora IPA-SFP-10G20 is a 10Gbps SFPplus Dual Single Mode 1310nm Module 20KM. This is for use with IPX series with an SFP+ slot.
Our Price: $398.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Aurora RK2-5-K 5 RU Rack Mounting Kit for VLX-TC1 / IPX-TC3A / RXC-3 Racks
Aurora Multimedia
Item# AURA-RK2-5-K
Aurora RK2-5-K is a 5RU Rack Mount Kit that Holds 12 Units - Includes 24 Rails & 6 Blanks and is compatible with the VLX-TC1-CF, IPX-TC3A, IPX-TC3A-Pro, HT-TC1-Pro, and RXC-3.
Our Price: $398.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Grundorf SLRB-12 12U Slanted Rack Shell
Grundorf
Item# GRUN-SLRB-12
Outfit your home or professional studio with one of Grundorf's attractive and functional Studio Slanted Rack Shells. These 'lidless' racks are designed to hold all your pro audio/video equipment for easy viewing and accessibility. The Gundorf SLRB-12 Slanted Rack Shell is a 12U rack and is the perfect solution for managing rack mountable studio processing including DAW, playback, and recording gear. It is also perfect for installations where a complete road case is not necessary. The...

Our Price: $259.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Grass Valley S2-RX-ST Python plus 2 Channel Rear Panel Receiver - ST/UPC
Grass Valley
Item# GVLY-S2-RX-ST
Grass Valley S2-RX-ST is a Multichannel Fiber Optic SDI and IP Transport System with CWDM Management & Multiplexing Python Plus is their answer to lowering the cost of digital video and fiber distribution, eliminating concerns about distance, interference or ground loop issues. With today's demanding market - technology shift-ing to IP and the constant increase in bandwidth demands driven by 3G and 4K UHD - Python Plus simplifies transport solutions. Each unit can transport a mix of digital...
Our Price: $125.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Middle Atlantic AXS-IR-4527-20 45 RU AXS Series IR Rack
Middle Atlantic Products
Item# MAP-AXS-IR452720
The Middle Atlantic AXS-IR-4527-20 can roll entire bays of equipment straight out for service and installation flexibility. A factory-assembled AXS system in a rack (IR) is ideal for access to rear equipment connections or when space-limited environments require equipment bays to be placed up against a wall. Note: The IR-AXS system comes pre-assembled as shown. Additional hardware is included that may not be required for your installation. Requires a Utility Knife, Power Driver...

Our Price: $2,755.80
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Middle Atlantic GRK-40-24HLRD 40 Space 24 Inch Deep Rack with Horizontal Bars
Middle Atlantic Products
Item# MAP-GRK-4024HLRD
The GRK Series is a versatile welded gangable rack with superior construction. Choose a GRK when a narrow multi-bay rack optimized for high density video cable bundles is required and a choice of either a horizontal or vertical lacing is desired. Features: Solid frame top and bottom for more robust construction 1,500 lb. weight capacity Horizontal cable management bars for tie-and-slide lacing Allows straight vertical cable runs through fully open top and bottom Finished edges at top and bottom...

Our Price: $1,465.20
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Nixer NIX00519 Wall Mount Bracket For PD DANTE
Nixer Pro Audio
Item# NPA-NIX00519
The Nixer NIX00519 is a PD Dante Mounting Bracket (pair) - Aluminium mounting brackets which allow for the PD Dante to be fixed to walls, tables etc Simply fix brackets to sides if the PD Dante using their existing screws then use the supplied drill template to mark out and drill the surface where the PD Dante is to be fixed (note wall fixing screws not supplied). Specifications: Weight: 3.0 oz Dimensions: 9.0 x 5.0 x 1.0 in
Our Price: $39.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Miranda 1RU Tray for up to Two HD-Bridge or DVI-RAMP2
Miranda Technologies
Item# TRAY-120
Miranda 1RU Tray for up to Two HD-Bridge or DVI-RAMP2
Our Price: $295.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Ultimate Support MDS-100 Modular Desktop Device
Ultimate Support Systems
Item# ULT-MDS-100
The MDS-100 modular desktop stand from Ultimate Support has been designed to support the wide variety of hardware based performance and recording configurations musicians all over the world are creating. Whether you are using desktop synthesizers, adapting effects pedals to your hardware synths or looking for a way to elevate your control surfaces, the MDS-100 is the customizable solution you've been looking for. The adjustable clamping walls and divider allow you to firmly place...
Our Price: $67.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Ultimate Support MDS-X Expander for Modular Desktop Device (MDS-100)
Ultimate Support Systems
Item# ULT-MDS-X
The MDS-X Expander from Ultimate Support lets you stack two MDS-100 units to create a fully customizable, non-proprietary, two-tier solution for use with the desktop synthesizers, drum machines, and effect units of your choice. Free yourself from just using one stand for dedicated products and solve your device stand problems permanently with the MDS-100 and MDS-X Expander from Ultimate Support. Please note! MDS-100 Modular Desktop Units are not included and...
Our Price: $23.99
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Doug Fleenor Design Model RK6-1 Rack Mount Kit for 6.5 Inch Stepladder Series Chassis
Doug Fleenor Design, Inc.
Item# DFD-RK6-1
The Doug Fleenor RK6-1 Rack Mount Kit adapts products that use the 6.5" Stepladder Series Chassis to a standard 19" rack. These products include the model 121,123, DMX1REL20A, DMX2REL5A , DMX2MPX, etc. Features: Specifications:
Our Price: $44.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Grass Valley DENSITE 2 Housing/Frame/Controller/PS
Grass Valley
Item# GVLY-DENSITE-2
The 2 RU Densité 2 Frame can simultaneously process 3G, HD, SD and analog video, as well as AES and analog audio. Its front-opening frame features dual hot-swappable power supplies (PSUs) and fans. Modules for the air-cooled frame are also hot swappable, and replacement modules can be configured automatically. All modules, redundant PSUs and fans are monitored to deliver status via GPI or an Ethernet port. Front panel multicolor LEDs provide status reporting, while a controller card allows card...
Our Price: $2,712.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-4RU-BASIC-KIT 4RU Kit Includes Chassis - 6 Modules
tvONE
Item# TV1-1RK4RUBASCKT
The 1RK-4RU-BASIC-KIT ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally-powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis can hold up to 16 modules with up to 2 voltage selectors each. The 1RK-4RU-BASIC-KIT ONErack Basic Kit contains 1 chassis and 6 modules. When using the ONErack...
Our Price: $700.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-4RU-CVR-BLK 4RU Blank Cover
tvONE
Item# TV1-1RK4RUCVRBLK
The 1RK-4RU-CVR-BLK is a blank cover for your ONErack Chassis. The 1RK-4RU-CVR-BLK mounts on to the chassis and helps protect the modules and other sensitive equipment mounted within your ONErack. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily....
Our Price: $85.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-4RU-CVR-PLEXI 4RU Windowed Cover
tvONE
Item# TV1-1RK4RUCVRPLE
The 1RK-4RU-CVR-PLEXI is A Windowed cover for your ONErack Chassis. The 1RK-4RU-CVR-PLEXI mounts on to the chassis and helps protect the modules and other sensitive equipment mounted within your ONErack. It also gives you the ability to see into your ONErack unit with the clear plexiglass window. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from...
Our Price: $100.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-4RU-FAN 4RU Fan Cover and PSU Connector Cable to be Powered By 1RK-4RU-PSU
tvONE
Item# TV1-1RK4RUFAN
The 1RK-4RU-FAN is a cover for your ONErack unit that cools the modules within the unit. The ONErack Fan cover contains 1 fan cover and PSU connector cable to be powered by 1RK-4RU-PSU. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externallypowered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis are available...
Our Price: $285.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-4RU-MOD 4RU Module Plate 1 Module Voltage Selector and 1 Rear Dock Plus Accessories
tvONE
Item# TV1-1RK4RUMOD
The 1RK-4RU-MOD is a module kit for the ONErack chassis. The ONErack Module kit contains 1 module, 1 Powercircuit, 1 Rear dock, Chassis mounting accessories, and PSU cables. The ONErack Module provides a mounting surface for devices and houses the voltage selector and power docks for the ONErack chassis. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered...
Our Price: $125.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-4RU-PSU 4RU w/ 250w Power Supply and Accessories
tvONE
Item# TV1-1RK4RUPSU
The 1RK-4RU-PSU is a Power Supply Module to use with the ONErack chassis. When using the ONErack Power Supply, each voltage selector, can provide power @ 5v, 7.5v, 9v, 12v, 13.5v, 18v, & 24v up to 35 watts. A pass thru is also available for custom power sources. Each ONErack Chassis can include 1 or more Power Supplies for added power which can also feed additional chassis, providing a clean power solution for all mounted devices. ONErack is a universal, powered mounting system that vastly...
Our Price: $630.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-5RU-BASIC-KIT 5RU Kit Includes Chassis - 6 Modules
tvONE
Item# TV1-1RK5RUBASKIT
The 1RK-5RU-BASIC-KIT ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally-powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis can hold up to 16 modules with up to 2 voltage selectors each. The 1RK-5RU-BASIC-KIT ONErack Basic Kit contains 1 chassis and 6 modules. When using the ONErack Power...
Our Price: $700.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-5RU-CVR-BLK 5RU Blank Cover
tvONE
Item# TV1-1RK5RUCVRBLK
The 1RK-5RU-CVR-BLK is a blank cover for your ONErack Chassis. The 1RK-5RU-CVR-BLK mounts on to the chassis and helps protect the modules and other sensitive equipment mounted within your ONErack. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily....
Our Price: $85.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-5RU-CVR-PLEXI 5RU Windowed Cover
tvONE
Item# TV1-1RK5RUCVRPLE
The 1RK-5RU-CVR-PLEXI is A Windowed cover for your ONErack Chassis. The 1RK-5RU-CVR-PLEXI mounts on to the chassis and helps protect the modules and other sensitive equipment mounted within your ONErack. It also gives you the ability to see into your ONErack unit with the clear plexiglass window. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from...
Our Price: $100.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-5RU-FAN 5RU Fan Cover and PSU Connector Cable to be Powered By 1RK-5RU-PSU
tvONE
Item# TV1-1RK5RUFAN
The 1RK-5RU-FAN is a cover for your ONErack unit that cools the modules within the unit. The ONErack Fan cover contains 1 fan cover and PSU connector cable to be powered by 1RK-5RU-PSU. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis are available...
Our Price: $285.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-5RU-KIT 5RU Kit Includes Chassis 6 Modules and a 250w Power Supply
tvONE
Item# TV1-1RK5RUKIT
The 1RK-5RU-KIT ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally-powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis can hold up to 16 modules with up to 2 voltage selectors each. The 1RK-5RU-KIT ONErack Basic Kit contains 1 chassis and 6 modules and a 250w Power Supply. When using the ONErack...
Our Price: $1,250.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-5RU-MOD 5RU Module Plate 1 Module Voltage Selector and 1 Rear Dock Plus Accessories
tvONE
Item# TV1-1RK5RUMOD
The 1RK-5RU-MOD is a module kit for the ONErack chassis. The ONErack Module kit contains 1 module, 1 Powercircuit, 1 Rear dock, Chassis mounting accessories, and PSU cables. Features: Slide in module for mounting small devices Includes one Voltage Selector to allow a choice of seven voltages Each Voltage selector provides 35w of power Accessory Voltage Selector (1RK XTRA-PWR) can be attached to give another voltage or additional power
Our Price: $125.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-5RU-PSU 5RU w/ 250w Power Supply and Accessories
tvONE
Item# TV1-1RK5RUPSU
The 1RK-5RU-PSU is a Power Supply Module to use with the ONErack chassis. When using the ONErack Power Supply, each voltage selector, can provide power @ 5v, 7.5v, 9v, 12v, 13.5v, 18v, & 24v up to 35 watts. A pass thru is also available for custom power sources. Each ONErack Chassis can include 1 or more Power Supplies for added power which can also feed additional chassis, providing a clean power solution for all mounted devices. ONErack is a universal, powered mounting system that vastly...
Our Price: $630.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE 1RK-5RU-PSU-2-HSWP - 5RU ONErack Dual Redundant - Hot Swappable 450watt Power Supply and Accessories
tvONE
Item# TV1-1RK5RUPSU2HS
ONErack is now ready for mission critical applications with this powerful, Dual-Redundant, Hot-Swappable Power Supply. tvONE 1RK-5RU-PSU-2-HSWP ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONEƒ_Ts patent pending design converts randomly sized, externally powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis are available in 4RU, 5RU and 6RU and...
Our Price: $1,750.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-6RU-CVR-BLK 6RU Blank Cover
tvONE
Item# TV1-1RK6RUCVRBLK
The 1RK-6RU-CVR-BLK is a blank cover for your ONErack Chassis. The 1RK-6RU-CVR-BLK mounts on to the chassis and helps protect the modules and other sensitive equipment mounted within your ONErack. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily....
Our Price: $85.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-6RU-CVR-PLEXI 6RU Windowed Cover
tvONE
Item# TV1-1RK6RUCVRPLE
The 1RK-6RU-CVR-PLEXI is A Windowed cover for your ONErack Chassis. The 1RK-6RU-CVR-PLEXI mounts on to the chassis and helps protect the modules and other sensitive equipment mounted within your ONErack. It also gives you the ability to see into your ONErack unit with the clear plexiglass window. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from any manufacturer...
Our Price: $100.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-6RU-FAN 6RU Fan Cover and PSU Connector Cable to be Powered By 1RK-6RU-PSU
tvONE
Item# TV1-1RK6RUFAN
The 1RK-6RU-FAN is a cover for your ONErack unit that cools the modules within the unit. The ONErack Fan cover contains 1 fan cover and PSU connector cable to be powered by 1RK-6RU-PSU. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis are...
Our Price: $285.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-FAN-PSU Optional 12v Power Supply for Fan Covers
tvONE
Item# TV1-1RKFANPSU
The 1RK-FAN-PSU is an optional 12 V power supply for any of the fan covers for the ONErack chassis. This option gives you additional power to cool your ONErack chassis. ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis are available in 4RU,...
Our Price: $25.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE RM-601 ONErack Spider Half-Rack Surface Mount
tvONE
Item# TV1-RM-601
Use the tvONE RM-601 Easily mount your half-rack ONErack Spider under a desk, on a wall or behind your monitor. ONErack Spider optimize any installation by eliminating unreliable DC wall warts and other power clutter from the rack design, while also providing reliable power to support a mix of 7 different voltage options; 5v, 7.5v, 9v, 12v, 13.5v, 18v, and 24v. Choose ONErack Spider for your mission-critical installations in healthcare, higher-education, broadcast and control rooms. ...
Our Price: $100.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
JVC RAK21LCDG2 Rackmount Kit for DT-V21G2Z LCD Monitor
JVC
Item# JVC-RAK21LCDG2
JVC RAK21LCDG2 Rackmount Kit for DT-V21G2Z LCD Monitor is especially designed to securely mount the monitor to a standard 19-inch rack.
Our Price: $220.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
AJA CMP Converter Mounting Plate for Mini-Converters
AJA Video
Item# AJA-CMP
With the AJA CMP Converter Mounting Plate you can easily attach most AJA Mini-Converters to industry standard wireless transmitter brackets, cameras, rigs, cranes, battery plates, almost anywhere! One bracket with two mounting screws included. and more. Features: Specifications:
Our Price: $129.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hammond DC4R24 24RU 4-Post Adjustable Depth 24-36 Rack
Hammond Manufacturing
Item# HMND-DC4R24
2 Options and 6 Sizes Available
The Hammond DC4R24 Open Rack series is one of the most economical solutions to house IT equipment in wiring closets or data centers. In situations where the wiring closet itself is under lock and key and accessed by a limited number of people, full cabinets having locking doors and side panels may not be required resulting in a significant cost savings.ÿ Features: Two (2) pairs of 19" mounting EIA compliant square-hole rails. Ships with a 50-pack of screws and cage nuts CAGKIT1032-50....
Read More

Our Price: $651.43
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hammond DC4R2436SP 24RU Adjustable Side 24-36 Depth For DC4R
Hammond Manufacturing
Item# HMND-DC4R2436SP
This Hammond DC4R2436SP is the 24U, adjustable side panel ONLY for the Hammond DC4R racks. The Hammond DC4R Open Rack series is one of the most economical solutions to house IT equipment in wiring closets or data centers. In situations where the wiring closet itself is under lock and key and accessed by a limited number of people, full cabinets. Specifications: Shipping Weight: 26Lbs (11.79kg) REACH Compliant: Yes RoHS Compliant:...

Our Price: $325.72
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hammond DC4R4436SP 44RU Adjustable Side 24-36 Depth For DC4R
Hammond Manufacturing
Item# HMND-DC4R4436SP
This Hammond DC4R4436SP is the 44U adjustable side panel ONLY for the Hammond DC4R racks. The Hammond DC4R Open Rack series is one of the most economical solutions to house IT equipment in wiring closets or data centers. In situations where the wiring closet itself is under lock and key and accessed by a limited number of people, full cabinets having locking doors and side panels may not be required resulting in a significant cost savings.ÿ Specifications: Shipping...
Our Price: $685.72
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hammond DC4R4448SP 44RU Adjustable Side 32-48 Depth For DC4R
Hammond Manufacturing
Item# HMND-DC4R4448SP
This Hammond DC4R4448SP is the 44U adjustable side panel ONLY for the Hammond DC4R racks. 32-48 inch depth. The Hammond DC4R Open Rack series is one of the most economical solutions to house IT equipment in wiring closets or data centers. In situations where the wiring closet itself is under lock and key and accessed by a limited number of people, full cabinets having locking doors and side panels may not be required resulting in a significant cost savings. Specifications:...

Our Price: $831.43
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hammond DC4RPR44 44RU Adjustable Panel Rail For DC4R44
Hammond Manufacturing
Item# HMND-DC4RPR44
This Hammond DC4RPR44 is the 44U adjustable side panel ONLY for the Hammond DC4R racks. The Hammond DC4R Open Rack series is one of the most economical solutions to house IT equipment in wiring closets or data centers. In situations where the wiring closet itself is under lock and key and accessed by a limited number of people, full cabinets having locking doors and side panels may not be required resulting in a significant cost savings. Specifications: Dimensions...
Our Price: $169.17
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hammond DC4RSHCM DC4R Horizontal Cable Manager
Hammond Manufacturing
Item# HMND-DC4RSHCM
Hammond DC4RSHCM is an additional set of horizontal cable bars (2) for the DC4R racks. Specifications: Shipping Weight: 1.95Lbs (0.88kg) REACH Compliant: Yes RoHS Compliant: Yes
Our Price: $56.67
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Hammond RM2U19BKFP Replacement Panel for Front or Rear Panel on RM2U19 Chassis
Hammond Manufacturing
Item# RM2U19BKFP
The Hammond RM2U19BKFP is a black powder coat aluminum replacement panel ONLY for attaching to the front or rear of the RM2U19 rack-mount/ desktop instrument enclosure chassis (RM2U19 sold separately).
Our Price: $23.79
Availability: In Stock
Add to Wish List
ViewZ VZ-RMK173L Rack Ear for VZ-173PM-12G
ViewZ
Item# VZ-RMK173L
ViewZ VZ-RMK173L is a Rack Ear for VZ-173PM-12G broadcast monitor. Features: Specifications:
Our Price: $39.90
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
MultiDyne Single SilverBack-VB Base Station Rack Kit for Mounting (1) in 1RU Rack Space
Multidyne
Item# RM-VB10-1
The MultiDyne RM-VB10-1 is a Single SilverBack-VB Base Station Rack Kit for Mounting (1) in 1RU Rack Space Features: Specifications:
Our Price: $105.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Middle Atlantic CWR-18-36PD4 CWR Series 18-36PD4 Cabling Wall Mount Rack - 36in D with Deep Plexi Front Door
Middle Atlantic Products
Item# MAP-CWR-18-36PD4
The CWR Series 18-36PD4 Cabling Wall Mount Rack with deep plexi front door from Middle Atlantic is a 26" wide cabinet designed for accommodating rack equipment and cable installation. A wide-face rackrail comes standard in the cabinet and is set back 4" from the door, leaving room for cable management. Tapped with mounting holes and electrical knockouts, as well as featuring 6 d-rings, the rail is designed to provide easy and convenient installation of your equipment. The rack door can be...

Our Price: $1,548.90
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Middle Atlantic RSH4A2S RSH Series Custom Black Anodized Rackmount for DirecTV C51-700
Middle Atlantic Products
Item# MAP-RSH4A2S
Middle Atlantic's innovative RSH custom rackmounts allow you to install virtually any component in a standard 19" enclosure without any modifications. Each unit is custom cut to provide a perfect opening for the face of the component you are mounting and provides a neatly-trimmed installation with a perfect fit. It assembles easily in minutes and rear brackets are included to prevent the mounted component from sliding back. A ventilated bottom helps to promote cooling.

Our Price: $217.80
Availability: In Stock
Add to Wish List
Middle Atlantic SRSR-X-17 SRSR Series Rack - 23 1/4D x 32 3/4-Inches - 200 Pound Capacity
Middle Atlantic Products
Item# MAP-SRSR-X-17
Specify an SRSR for easy rear access to equipment connections in millwork, cabinets and flush in-wall installations. Available with a 19" or 23" useable depth, the SRSR system extends and rotates 90° in either direction, making it ideal for smaller systems. Features: Removable rack frame allows in-shop integration and on-site installation of equipment Locks in the extended position for simplified equipment integration Rotating equipment bay locks in place at 0§, 60§ and 90§ for easy installation...
Our Price: $1,327.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
ViewZ VZ-RMK173B Rack Ear for VZ-173PM-HDR
ViewZ
Item# VZ-RMK173B
ViewZ VZ-RMK173B is a Rack Ear for VZ-173P-HDR broadcast monitor. Features: Specifications:
Our Price: $43.70
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ADDERLink ALAV-RMK-CHASSIS ALAV Series Rack Mount Chassis
Adder Corporation
Item# ADR-ALAVRMKCHASS
ADDERLink ALAVRMKCHASS is a 19 inch, 3RU rack mount chassis kit for up to 16 AdderLink ALAV extenders (sold separately). Each extender that is to be mounted requires a ADR-ALAVRMKFASC faceplate (sold separately) Features: Specifications:
Our Price: $274.50
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
ADDERLink ALAV-RMK-FASCIA ALAV Single Fascia Mounting Plate for RMK-CHASSIS
Adder Corporation
Item# ADR-ALAVRMKFASC
The ADDERLink ALAV-RMK-FASCIA is a universal rack mounting plate for attaching single AdderLink AV Series extenders to the RMK-CHASSIS (sold separately). One plate needed for each extender. Features: Specifications:
Our Price: $19.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Link Electronics PRT-700 19in Rack Tray for 500 & 700 Series Products
Link Electronics
Item# PRT-700
The PRT-700 is a 19" Rack Tray designed to hold up to 3 of any 500 Series or 700 Series Products.
Our Price: $119.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
tvONE 1RK-6RU-BASIC-KIT ONErack 6RU Kit Includes Chassis - 6 Modules
tvONE
Item# TV1-1RK6RUBASKIT
The tvONE 1RK-6RU-BASIC-KIT ONErack is a universal, powered mounting system that vastly improves rack installation of small devices. tvONE's patent pending design converts randomly sized, externally-powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis can hold up to 16 modules with up to 2 voltage selectors each. The 1RK-6RU-BASIC-KIT ONErack Basic Kit contains 1 chassis and 6 modules. When using the ONErack...
Our Price: $700.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
tvONE ONErack 1RK-6RU-PSU 6RU 250w Power Supply and Accessories
tvONE
Item# TV1-1RK6RUPSU
The 1RK-6RU-PSU is a power supply module to use with the ONErack chassis. When using the ONErack Power Supply, each voltage selector can provide power at 5v, 7.5v, 9v, 12v, 13.5v, 18v, and 24v up to 35 watts. A pass thru is also available for custom power sources. Each ONErack Chassis can include 1 or more Power Supplies for added power which can also feed additional chassis, providing a clean power solution for all mounted devices. ONErack is a universal, powered mounting system that...
Our Price: $630.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List

Equipment Rackmounts provide the ideal solution for the storage and transport of your sensitive and fragile equipment. From simple Equipment Rackmounts to sophisticated shock mount cases, from 2U to 24U systems, we carry a wide range of sizes, and depths to meet your needs and the durable construction to protect and secure your most valuable items.Equipment Rackmounts are available with gasket seals, front and rear removable covers, front and rear rails, pull handles and wheels; or the ultimate military standard shock mount case for 19” racks with suspended aluminum frames. Whatever your needs are, Markertek has got a rackmount for you!

Sign In

Equipment Rackmounts

Narrow Products

By Brand

By Price Range

Filter By