-
Item# 2507-10
The Model 2507-10 75-ohm Terminator (10-pack) provides a 75-ohm load that can be used on unused splitter output ports in order to maintain uniform signal levels.
Note: Do not use terminators on unused distribution amplifier outputs. Features: 10 piece bulk pack
Terminates unused splitter outputs with a balanced 75-ohm load
Type F male connector

Our Price: $20.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# CP-LPF750
The LPF-750 Low-pass Filter is used on systems when broadband entertainment feed is supplied by a CATV service. The filter removes all CATV channels above the pass band, allowing insertion of locally-generated ChannelPlus modulated channels. In addition, the filter removes cable system noise which degrades the picture quality of the locally-generated channels. Features: 0 to 750 MHz bandpass frequency
Passes off-air TV channels 2 to 60
Passes CATV channels 2 to 116
Allows insertion of TV channels...

Our Price: $55.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# 2503-10
ChannelPlus in-line attenuators can be inserted in coaxial cable feeds to reduce signal amplitude levels. The model 2503 provides a 3dB insertion loss, and the model 2506 provides a 6dB insertion loss. Features: Reduces signal strength 3 dB
Type F barrel connector
Combinations of 2503s and 2506s may be used together to create attenuators with greater insertion loss
These attenuators provide a better, more permanent solution over using a variable attenuator

Our Price: $30.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# CP-2512
4 Splitter Models AvailableThe Channel Plus Model 2512 DC & IR Passing 2-way Splitter/Combiner is a bi-directional splitter providing a 1 GHz bandwidth and is ideal for antenna and coaxial cable operations.
The splitter/combiner can be used for two applications. It can be used to split a signal from a source or combine signals from multiple sources onto one coax run - essentially a two in one out antenna combiner. Use a DC passing splitter whenever DC IR signals are present on the coax.
Features: 1 GHz bandwidth
3.5...
Read More
-
Item# CP-2506-10
Channel Plus 2506-10 6dB In-line Attenuator (10-Pack)

-
Item# CP-DA506BID
The Model DA-506BID Bi-directional RF Distribution Amplifier creates an ideal entry-level product for broadband distribution. Encased in an extruded aluminum shell, the Model DA-506BID meets the needs of small distribution systems which do not require IR control or modulator inputs.
The Model DA-506BID has one input for CATV or off-air antenna and six outputs for televisions. Four outputs are for televisions up to 75 feet away and 2 outputs can be used up to 150 feet away. The DA-506BID has bi-directional...

-
Item# CP-NF469
3 Types AvailableThe Model NF-469 Notch Filter couples the incoming signal source coax cable to the input on a splitter or bi-directional DA-series amplifier. Once installed, the NF-469 filters out channels to make room for modulated channels. In addition, the NF-469 blocks the modulated signals from being broadcast back into the coax. The NF-469 is a perfect solution for modulation in the ever-increasing bandwidth taken up by Cable Television.
The Model NF-469 Notch Filter blocks incoming cable TV channels 64-70...
Read More
-
Item# CP-WPPDCWE
All plates feature REAR 110 punch down inputs and installation is 3x faster than normal wall plates.

-
Item# CP2501-10
The Model 2501 Blocking Capacitor is used in systems where DC and/or infrared control pulses are present on the coaxial cable. When such signals are not wanted or might be shorted out by downstream video products, a Model 2501 blocking cap can be inserted in an individual coaxial cable feed. The capacitor serves like an open circuit to DC and low frequency IR control signals, yet passes all RF signals on.
Example: Using a 12-volt IR system and not using Model 2100A wall plates at all coax drops,...

Our Price: $25.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# OPH-001
Channel Plus H001 Universal Grid Mount Kit 12 Pack Hole Inserts with Screws
Features: Grid hole inserts and screws
Pack of 12

-
Item# OPH-336
The Model H336 36" Enclosure provides grid mounting space for Linear structured wiring components.
Features: Mounting tabs, 3 drywall thickness settings Fits between studs- 14in wide Accepts the OPH-290 or OPH-291 power accessories Eight 2" and Four 3/4" knock outs Steel, painted white Optional lock available (see below) OPH-218A is 14in W x 18in H OPH-336 is 14in W x 36in H Specifications:

Our Price: $60.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# OPH-HC36A
The Model HC36A 36" Enclosure Cover fits on the Model H336 structured wiring enclosure. The ventilated enclosure cover secures and protects the structured wiring components mounted inside the Model H336 enclosure. The cover is power coat painted bright white. The optional Model H208 lock kit can be installed on the cover for additional security. Features: Secures and protects components inside the enclosure
Bright white powder coat paint finish
Six louvered vents for enclosure cooling
...

Our Price: $38.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
-
Item# OPH-HD18
The Model HD18 18" Hinged Door Depth Extension Kit fits on the Model H318 structured wiring enclosure. The ventilated enclosure cover secures and protects the structured wiring components mounted inside the Model H318 enclosure. The hinged door increases the cabinet depth for larger power supplies and improved cooling. The white cover has a smoked plexiglas window. The optional Model H208 lock kit can be installed on the cover for additional security.
Features: Secures and protects components...

Our Price: $53.95
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List