Narrow Results:

• 

  ATX Networks VMX1-1.1 High-Definition MPEG-2/4 QAM Set-Top Decoder Box with Verimatrix CAS

  Part of ATX's all-digital CONDOR solution, the VMX1-1 HD QAM set-top box descrambles signals from the CONDOR headend while converting digital signals to analog for display on legacy TVs. The unit is equipped with a single tuner for the recording of one TV channel and features Verimatrix® CAS for content protection. Offering HDMI and composite outputs, the unit provides PVR/media player capabilities, Electronic Program Guide (EPG) support, and an intuitive high-definition interface...

  

  Read More

  Item #: PICO-VMX1-11

  Availability: In Stock

  Our Price: $104.59

  Add to Wishlist
• 

  ATX Networks CA-50/550 550MHz CATV High-Gain Headend Distribution Amplifier

  The Tru Spec ATX Network CA-50/550 is a high quality push-pull wall-mounted distribution amplifier producing signals with extremely low-noise and harmonic distortion. This amplifier is capable of 78 channel operation over the 54-550MHz range, and makes an excellent distribution system amplifier in MDU, CATV, and SMATV systems. Because of its extremely low-noise figure and low distortion, the CA50/550 is ideally suited for use in larger networks where amplifier cascading is required....

  

  Read More

  Item #: PM-CA-50-550

  Availability: In Stock

  Our Price: $129.99

  Add to Wishlist
• 

  ATX Networks TSMS-5/16RK Rack-Mounted 14V/18V Satellite Multiswitch - 16 output

  The TSMS-5/16RK is a 16 output rack-mounted 14V/18V Satellite Multiswitch. 5 input simple interface design provides 4 satellite polarity inputs plus 1 off air antenna and 16 outputs, for quick installation. Wide frequency range 40'2150MHz. Compatible with DIRECTV Phase III and other reception systems that utilize 22kHz tone switching. Features: 5 input simple interface design provides 4 satellite polarity inputs plus 1 off air antenna and 16 outputs, for quick installation Wide...

  

  Read More

  Item #: PM-TSMS-516RK

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $259.55

  Add to Wishlist
• 

  ATX Networks PM-TA36 36dB Gain UHF/VHF Amplifier

  The TA-36 is a 36dB Gain UHF/VHF Amplifier. Features: Two switchable FM traps Separate gain controls: VHF-High, VHF-Low and UHF AC power indicator -20 dB monitor output 3-wire AC cord Accessible AC fuse 50 dB output capability

  

  Read More

  Item #: PM-TA36

  Availability: In Stock

  Our Price: $99.29

  Add to Wishlist
• 

  ATX Networks PM-CA30-550 CATV 30 dBmV Gain Distribution Amp

  The CA30-550 & CA30-550RK are high quality push-pull amplifiers producing signals with extremely low distortion and harmonic content. The design is capable of 54 channel operation over the 54-550 MHz range. The PM-CCA30-550 makes an excellent headend launch amplifier and is frequently used in conjunction with the PHC-12U headend combiner above. It is also useful for amplifying the cable input prior to the CEF channel elimination filter. The CA-30/550 enclosure uses a black anodized aluminum extrusion...

  

  4 Types Available

  Item #: PM-CA30-550

  Availability: In Stock

  Our Price: $109.95

  Add to Wishlist
• 

  ATX Networks TA-25 18-25 dB UHF/VHF/FM Distribution Amplifier

  The ATX Network TA-25 is a cost-effective wide-frequency bandwidth amplifier. It features a 68 Off-air channel range (54 MHz to 108 MHz) suitable for small to large MATV-SMATV systems. The 7 db Sloped-output across band provides low harmonic distortion and a 20 db FM trap switch (88 MHz to 108 MHz) filters high level local FM radio stations reducing harmonic distortion. The PM-TA-25 is housed in a Heave gauge rugged shielded wall-mount case. Integrators will find it's convenient...

  

  Read More

  Item #: PM-TA-25

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $28.99

  Add to Wishlist
• 

  ATX Networks VBC-HRL 3GHz DC-Voltage Blocking Coupler

  The ATX Network VBC-HRL is a 3GHz DC-Voltage Blocking Coupler Features: Used to stop voltage from entering a device Protects sensitive test equipment from damage test Two bandwidths available for use in CATV and Satellite applications Low insertion loss for transparent operation High return loss for unsurpassed performance in digital signal environments Specifications: Specifications Bandwidth 5~1000MHz Flatness @ 1GHz >0.5dB Insertion Loss @ 40MHz Return Loss >20dB...

  

  Read More

  Item #: PM-VBC-HRL

  Availability: In Stock

  Our Price: $1.59

  Add to Wishlist
• 

  ATX Networks PPFAM In-Line Attenuator Pad - 8db

  The PPFAM is an in-line 3db attenuator pad. Power passing inline attenuator pads reduce RF signal strength to reduce intermodulation caused by high input levels. Features: Reduces RF signal strength to reduce intermodulation caused by high input levels Precision SMD monolithic ceramic printed circuit board Etched glazed type resistors Return loss 20dB typical Attenuation values 3, 6, 8, 10, 12, 16, 20dB (PPFAM) Flatness 0.5dB 1% Tolerance components 22-Gauge spring steel...

  

  7 Types Available

  Item #: PPFAM-8

  Availability: In Stock

  Our Price: $2.05

  Add to Wishlist
• 

  ATX BWH-BWLQ-R Brick Wall Low/Highpass Combo Filter (QAM) - R 54MHz - 65MHz (Pass Channels 2-5)

  Models BWL-9050 & BWH-9060 (BWH-BWLQ-R) are extremely sharp cut-off, low & highpass filters designed primarily to uncombine a CATV cable feed to interface to a fiber optics link or for reinserting a block of new programming. Transition from knee to first channel to be rejected is 1.5 MHz. Two brick wall filters can be combined to make an extremely sharp band rejection or bandpass filter. Features: Temperature stable Low frequency vibration stable Final production graph available on request 3.5"...

  

  Read More

  Item #: ATX-BWH-BWLQ-R

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $2,290.00

  Add to Wishlist
• 

  ATX IPQC GbE IP-Input Mux Scrambler EdgeQAM

  The ATX IPQC is a highly integrated 1RU video EdgeQAM that can multiplex and scramble IP video signals and convert them to QAM/DVB-C channels for use in CATV systems, such as the ATX CONDOR. The unit features a flexible design and can be configured in a number of ways to suit specific end applications. The high-quality QAM output of the EdgeQAM is organized into three independent blocks of four contiguous channels, which can be placed anywhere in the extended CATV range of 50 MHz to 1002...

  

  Read More

  Item #: ATX-IPQC

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $5,149.00

  Add to Wishlist
• 

  ATX Networks MPC-PSF12/16 Mini-Power Supply

  The MPC-PSF12/16 is ATX Network's heavy-duty, fan-cooled power supply designed to power either the MPC12, MPC16 or MPS-12 mini-headend systems. The power supply is a 70-Watt capacity module specifically designed for mini-modulator applications requiring a highly reliable DC input supply. Sophisticated packaging and filtering techniques are used to ensure compliance with UL/CSA specification thus minimizing the need for overall system filtering. The MPC-PSF12/16 power supply employs...

  

  Read More

  Item #: MPC-PSF12-16

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $150.95

  Add to Wishlist
• 

  ATX Networks OM4-SA Stand Alone QAM Output Module for PD1000

  The professional-grade PD1000 HD encoder modulation system allows users to encode HD, SD & HD-SDI signals in MPEG-2 or H.264 formats, all in a single rack space. The OM4-SA is a QAM Output Module for the PD1000 (Stand Alone). The unit supports real-time encoding, while offering the flexibility of two, four, six, or eight HDMIT (in the clear), HD-SDI, component & composite (closed captioning) inputs. The HD encoder offers simultaneous RF (QAM,ISDB-T or ISDB-Tb) & IP outputs. The PD1000...

  

  Read More

  Item #: OM4-SA

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $907.15

  Add to Wishlist
• 

  ATX Networks IPQT-12 GbE IP-input Edge QAM Modulation System

  ATX Network's IPQT-12 is a professional-grade Edge QAM that accepts a GbE IP input in the clear or pre-encrypted sources and converts the selected streams into 12 QAM RF channels. The Edge QAM supports Multiple and Single Transport Stream configurations and is easy to set up, control and monitor with the 10/100 Base-T Ethernet port. The IPQT-12 Edge QAM is a single rack spaced chassis that also supports optional EAS and external redundant power. Ideal uses for the IPQT-12 Edge QAM...

  

  Read More

  Item #: PICO-IPQT-12

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $4,559.00

  Add to Wishlist
• 

  ATX Networks PD1000-4 4 Channel HD/SD Encoder (1xPD1000 2xEM-2HD 1xOM14)

  The professional-grade PD1000-4 HD Encoder Modulation System from ATX Network allows users to encode HD, SD, and HD-SDI signals in MPEG-2 or H.264 formats, all in a single rack space. The unit supports real-time encoding, while offering the flexibility of two, four, six, or eight HDMI (in the clear), HD-SDI, component, and composite (closed captioning) inputs. The HD encoder offers simultaneous QAM and IP outputs. This model, the PD1000-4, is a 4 Channel HD/SD Encoder...

  

  Read More

  Item #: PICO-PD1000-4

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $3,195.00

  Add to Wishlist
• 

  ATX Networks PICO-PRO Signal Analysis Meter

  The ATX Network ATX Network-PRO is a signal analysis meter. Features: 5'870MHz operation including SUB-VHF forward and reverse signal measurement 4 channel plans enables easy switching between Off-Air and CATV signals Frequency or channel selection provides compatibility with channel or data, and other narrow bandwidth carriers Full spectrum scan provides display of up to 100 channels simultaneously Tilt measurement feature provides for simplified system balancing ...

  

  Read More

  Item #: PICO-PRO

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $631.00

  Add to Wishlist
• 

  ATX Networks A860 Agile Modulator

  The ATX Network A860 agile modulator is a frequency agile audio/video professional re-broadcast grade, microprocessor controlled CATV modulator. Attractive and easy to operate, the sleek design highlights the useful front panel modulation bar-graphs and channel indicators. The simple push button tuning interface allows the A860 to be configured for CATV standard, HRC, and IRC or North American broadcast channels with an RF output of 60 dBmV. The front panel output test point provides...

  

  Read More

  Item #: PM-A860

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $863.75

  Add to Wishlist
• 

  ATX Networks A860S CATV Stereo Agile Modulator Channels 2 to 134

  The ATX Network A860S is the stereo version of the agile modulator. It's a frequency agile audio/video professional re-broadcast grade, microprocessor controlled CATV modulator. Attractive and easy to operate, the sleek design highlights the useful front panel modulation bar-graphs and channel indicators. The simple push button tuning interface allows the A860S to be configured for CATV standard, HRC, and IRC or North American broadcast channels with an RF output of 60 dBmV. The...

  

  Read More

  Item #: PM-A860S

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $1,036.20

  Add to Wishlist
• 

  ATX Networks EAS-12B 12 Channel Emergency Alert System

  The ATX Network PM-EAS12B is a user friendly 12-Channel professional rebroadcast grade audio-video emergency alert system. Enables users, via a local or remote contact closure to simultaneously override up to 12 AV channels (monaural or BTSC stereo) with one override AV source. Alternately, the unit can be daisy-chained to override 23 channels with an audio or video-only override source. Interrupts the primary signals at baseband level instead of breaking into the I.F. loop, eliminating...

  

  Read More

  Item #: PM-EAS12B

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $716.30

  Add to Wishlist
• 

  ATX Networks EM-2HD MPEG-2/H.264 Dual HD Encoder Module for PD1000

  The ATX Network EM-2HD ia an MPEG-2/H.264 Dual HD Encoder Module for PD1000. Features: Supports up to 1080p real time encoding and up to 8 HD video channels in MPEG-2 or H.264 formats in 1RU Encodes Audio - Dolby Digital or MPEGQAM/OFDM, IP and ASI outputs Field upgradable with dual channel encoder modules (up to 4 per PD1000) Multiplexes up to 4 HD programs in 1 QAM/OFDM channel for bandwidth efficiency Inputs per dual encoder module - component, HDMI (clear) and composite/closed...

  

  Read More

  Item #: PM-EM-2HD

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $1,195.00

  Add to Wishlist
• 

  ATX Networks EM-2HD/D MPEG2/H.264 Encoder w/Dolby Digital Creator

  The ATX Network EM-2HD/D is an MPEG2/H.264 Encoder w/Dolby Digital Creator. The EM-2HD/D Encodes up to 1080p real time videoand audio in MPEG-2 or H.264 formats. The EM-2HD/D Dual encoder module works with the PD1000 and the OM4. Features: Includes Dolby Digital Content Creator Supports up to 1080p real time encoding and up to 8 HD video channels in MPEG-2 or H.264 formats in 1RU Encodes Audio - Dolby Digital or MPEGQAM/OFDM, IP and ASI outputs Field upgradable with dual channel...

  

  Read More

  Item #: PM-EM-2HDD

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $1,836.00

  Add to Wishlist
• 

  ATX Networks EM-HD-SDI HD-SDI Dual MPEG-2/H.264 Encoder Module for PD1000

  The ATX Network EM-HD-SDI is a professional grade MPEG2 or H.264 HD SDI Encoder Module for the PD1000 Universal Digital Platform Encoder / QAM Modulator. The EM-HD-SDI Dual SDI encoder module works with the PD1000 and the OM4. Features: Specifications: Audio/Video Inputs: SDI Dual 3G/HD/SD (BNC)

  

  Read More

  Item #: PM-EM-HD-SDI

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $3,000.00

  Add to Wishlist
• 

  ATX Networks IPQC24 1-RU Video Edge QAM / Multiplex and Scramble IP Video Signals - Converts to QAM/DVB-C Channels

  The IPQC24 is a highly integrated 1-RU video edge QAM that can multiplex and scramble IP video signals and convert them to QAM/DVB-C channels for use in CATV systems, such as the ATX Network CONDOR. The unit features a flexible design and can be configured in a number of ways to suit specific end applications. The high-quality QAM output of the edge QAM is organized into 24 independent QAM channels, which can be placed anywhere within a 768 MHz span, from 36 MHz to 960 MHz. The...

  

  Read More

  Item #: PM-IPQC24

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $10,159.15

  Add to Wishlist
• 

  ATX Networks IPQC24-IP 1-RU Video Edge QAM - Adds 24 IP Output Streams to IPQC24

  The IPQC24-IP adds 24 IP output streams to the IPQC24. The IPQC24 is a highly integrated 1-RU edge QAM that can multiplex and scramble IP video signals and convert them to QAM/DVB-C channels for use in CATV systems, such as the ATX Network CONDOR. The unit features a flexible design and can be configured in a number of ways to suit specific end applications. The IPQC24-IP is perfect for installations where a single master headend will feed numerous remote head-ends via IP. The high-quality...

  

  Read More

  Item #: PM-IPQC24-IP

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $25,988.90

  Add to Wishlist
• 

  ATX Networks L860 - Bi-Directional Launch Amplifier - CATV - Ch.T7-134

  The ATX Network L860 is Bi-directional launch amplifier. Broadband 54-1000MHz forward bandwidth. 5-36MHz active reverse path Features: Broadband 54-1000MHz forward bandwidth! 5-36MHz active reverse path 30dB typical forward-path gain for optimum performance to overcome combining losses and provide ample level for distribution 20dB active reverse-path gain for extra level to distribute reverse path signals to CMTS and other upstream applications Adjustable gain and slope controls...

  

  Read More

  Item #: PM-L860

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $519.79

  Add to Wishlist
• 

  ATX Networks MMA860S Universal-Chassis Stereo Mini-Agile Modulator

  The ATX Network MMA860S is a mini agile modulator compatible with most makers of modulator chassis. It features a 135-channel range 54-860 MHz (CATV 2-135) and a > 45 dBmV min. adjustable output for optimum carrier-to-noise performance. A microprocessor control enables quick digital pushbutton channel selection for ease of installation, configuration, and improved system uptime. Features: Compatible with most manufacturers mini-modulator chassis 135-Channel range 54-860MHz (CATV...

  

  Read More

  Item #: PM-MMA860S

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $279.95

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends