-
Item# COL-SR51MKIII
The SR5.1MKIII has been upgraded with a 47 position stepped attenuator made exclusively for Coleman Audio. Fold down for stereo and mono capitablity. Front panel channel trims and mute switches allow proper calibration and easy evaluation of signal localization. Inputs are XLR / TRS combo jacks to allow easy interconnection with the A/B5.1 Surround Switcher, or other equipment, in any environment. Outputs are XLR connectors. Features: Six balanced inputs on combo XLR / TRS jacks
Six balanced outputs...

Our Price: $1,460.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-HP6
The Coleman Audio HP6 is a six-channel headphone aplifier with two stereo cue inputs on the backpanel that uses combo jacks so either TRS 1/4" or XLR connectors will work.
The front panel has six stereo outputs - Each has a select switch for desired cue signal and an individual level control for the headphone output.
Plenty of Power
Designed with discrete transistors so you will be able to drive any headphone that you may use.
Features: Two stereo cue inputs on the backpanel...

Our Price: $450.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-PH1BLK
The PH1 500 Series module is a device input for a smartphone, tablet, or laptop. It allows you to patch the headphone output of the device directly into you studio system so you can listen to a clients music on the control room monitors. The PH1 takes the unbalanced input & converts it to a balanced audio signal with the correct impedance for your console or monitor controller. Since it's in the 500 rack it's always connected and ready for a quick reference check.
Features: Lunchbox connection
Stereo...

Our Price: $250.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-PH1RED
The PH1 500 Series module is a device input for a smartphone, tablet, or laptop. It allows you to patch the headphone output of the device directly into you studio system so you can listen to a clients music on the control room monitors. The PH1 takes the unbalanced input & converts it to a balanced audio signal with the correct impedance for your console or monitor controller. Since it's in the 500 rack it's always connected and ready for a quick reference check.
Features: Lunchbox connection
Stereo...

Our Price: $250.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-TC4
The Coleman Audio TC4 is a DAW monitor controller for mastering, or any studio. There are two balanced stereo inputs, a completely passive signal path through a 47-position stepped attenuator, that tracks to .05dB, and maintains the stereo balance at any level. This feeds the mains or alternate balanced speaker outputs. There are four balanced stereo inserts in the signal chain with relay switching to keep the signal path as passive as possible. This makes A/Bing compressors, limiters, EQ...

-
Item# COL-SPK51
The SPK5+1 provides switching for five stereo outputs and one stereo sub output from a single stereo input. The sub woofer output is always on unless the sub mute switch is pushed. This allows multiple stereo speakers to be selected with or without the sub woofer. All switching is completely passive. Features: One balanced stereo input on XLR's
Five balanced stereo outputs on XLR's
One balanced stereo sub output on XLR's
Sub mute switch
Completely passive switching

Our Price: $595.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-MS8A
The MS8A follows with all the features of the MS6A, and improves the series by increasing the number of switchable sources to eight, and adding an additional passive fixed level stereo output. This path is perfect for metering or a tape feed. A mono switch allows you to check phase compatibility of a stereo source and the left input only provides mono on all outputs. This model incorporates 1/4" TRS connections for all inputs and outputs.

Our Price: $840.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-MS6
3 Options AvailableThe Perfect Addition To Your Audio & Video Tape Duplication Systems! The MS6 adds 6 stereo inputs to any audio system. This allows an Aof sound sources. All inputs and outputs are balanced XLR connectors, so installation is quick and easy. An optional output volume control is also available.
Features: 6 Stereo inputs, 1 stereo output
Balanced XLR connectors
Standard 1-space rackmount
Optional output volume control
Read More
Our Price: $595.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-PHONEMIXDI
Now you can hear your client's music on your studio monitors instead of a pair of ear buds or the phone's speaker. Easily patch into your system with a pair of mic cables.
You also get a great DI for recording instruments and a headphone output to practice along with the music on the device without disrupting a session. Features: Smartphone input - 1/8" mini cable included
Stereo instrument input
Pad switch for those hot guitar pickups
Headphone out gets mix of instrument and phone
Two stereo...

Our Price: $480.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-PS1A
The PS1A provides switching and monitoring control for up to four stereo devices. Easy comparison of input and output of any recording medium. This unit provides a variable level monitor output and two additional fixed outputs for metering, cue feed or master record path (ie; DAT, CD-R, or even linear magnetic media, aka... tape!). The mono switch allows you to check phase compatibility of a stereo source and only feeds the monitor ouput. All connections are via XLR. Features: Four balanced stereo...

Our Price: $820.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-QS8MKII
The QS8MKII is a control room monitor, a communications module, a cue mixer and a summing box all in a one unit. As a control room monitor the QS8MKII has a passive signal path, a 47 position stepped attenuator and alternate speaker outputs. Both the stereo cue input and the stereo Aux 3 input have their own level control and combine to make the cue mix. Aux 3 eliminates the latency issue by feeding the input signal back to the headphone mix. The talkback mic with it's own level control allows easy...

Our Price: $1,540.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-LS3
With over 3,000 units in the field the LS3 is the most versatile selector for balanced audio routing. The LS3 provides passive switching of three stereo outputs from a single stereo source. Or as a source selector any of three stereo sources to a single stereo output. As a speaker selector, you can select multiple outputs simultaneously. An excellent tool for isolating your subwoofer or using it with multiple pairs of speakers. All inputs and outputs are on ¬" TRS jack
Features: Completely Passive...

-
Item# COL-71SW
With the 7.1SW balanced audio switcher you can select any one of four 8 channel balanced audio inputs and route them to an 8 channel balanced output. The inputs and output are on DB25 connectors wired to the Tascam format. Any one of the inputs can be routed to the output via the push buttons on the remote. The remote comes with a 25 foot cable attached to a molded MIDI connector.
Features: Four inputs DB25 wired for 8 audio channels
One output DB25 connector
Remote with 25 foot cable
Completely...

Our Price: $810.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-AB51
Provides precision 5.1 Surround switching for source comparison or alternate speaker selection. The unit provides completely passive relay switching for up to three, six-channel surround paths. The unit can be configured with one input and two outputs as a speaker selector, or two inputs to one output for source comparison. Interconnect with the Coleman SR5.1 is easy with 1/4" TRS jacks Features: Twelve balanced inputs on TRS jacks
Six balanced outputs on TRS jacks
Remote switching
Completely...

Our Price: $630.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-CMC4
The CMC4 gives you the control of your sub woofer. Once a balance is set between the main speakers and the sub woofer the main level control will control both. There's also a mute switch to check your mix with or without the sub.

Our Price: $790.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-TB4M
Similar in design to the M3, the TB4M provides facilities to act as the control room monitor source selector & adds a host of features making it a studio communications control module as well. The control room signal path is completely passive, with a four gang stepped attenuator, that tracks within ±.05 dB. The TB4M includes an independent cue & talkbalk system with independent level controls, a mono sum, selectable headphone monitoring, microphone & remote switching.
Features: Four balanced...

Our Price: $1,495.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-RED48
The Coleman Audio RED48 summing console fills the void left by the mixing console you still wish you had. It brings back the analog console sound that's been missing in the mixes and adds essential control room functions so your studio is easier to navigate.
The RED48 consists of three sections: the control room monitor, the communications, and the mix buss.
The control room monitor section has three balanced stereo input sources and the mix buss to select from. A passive stepped attenuator...

Our Price: $2,500.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-CA500EQ
The Coleman Audio CA500EQ is a 4 band stereo equalizer. The inputs & outputs are balanced on XLR connectors. There is an input level control so you can adjust the audio signal before equalizing to help prevent clipping, and an output level control to readjust the gain of the signal with equalization. The EQ in switch turns the entire equalizer on or off.
The stereo/mono switch allows the CA500 to become a mono EQ unit. The audio passes through the left channel first and then...

Our Price: $2,600.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-CA500M
The Coleman Audio CA500M is a 4 band stereo equalizer. The inputs & outputs are balanced on XLR connectors. The EQ in switch turns the entire equalizer on or off. The high frequencies (8kHz, 10kHz, 12kHz and 16kHz) can be switched between shelving or peak EQ with 5db of boost or cut in 1db discrete steps. The low frequencies (30Hz, 60Hz, 100Hz, and 150Hz) are shelving EQ with 5db of boost or cut in 1db discrete steps. The two mid bands are peak equalizers with frequencies overlapping by 1/4...

-
Item# COL-M3PHMKIII
Designed to be the control room monitor source selector. This unit's control room signal path is completely passive, with a four gang 47 position stepped attenuator, that tracks within ±.05dB. This ensures accurate, and repeatable stereo imaging at any level. Individual mute switches allow speaker isolation and a phase reverse switch helps you check the integrity of the audio path.
A four input source selector and three balanced outputs provide numerous monitoring options in any application.
...

Our Price: $1,260.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-MBP2
The MBP2 sets the standard of VU Metering in a stand alone package. Utilizng balanced bridging inputs to eliminate loadng, this unit provides input level trims, two switch selectable operating levels and an internal power supply. The Coleman VU meter line has been updated to have an adjustable peak indication as well as the factory alignment. The new operating levels are +10db and +4 db to make the VU respond in a useable scale with the hot digital levels coming from DAW's. The Peak level is set...

Our Price: $610.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-MBP4
Providing precise measurement of audio levels. The moving coil VU meter has long been the standard of measurement. Coleman Audio has assembled the finest movements and combined all the necessary features in it's line of analog metering systems to satisfy the most discerning engineers. For calibration, duplication, and broadcast instrumentation, the Coleman line of meters excels in the most demanding applications. The Coleman VU meter line has been updated to have an adjustable peak indication as...

Our Price: $975.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-SMP51
SMP5.1 Provides precise measurement of audio levels in a surround environment, the SM5.1 allows easy alignment of the surround system as well as monitoring levels at a glance. Coleman Audio has assembled the finest movements and combined all the necessary features in it's line of analog metering systems to satisfy the most discerning engineers. The Coleman VU meter line has been updated to have an adjustable peak indication as well as the factory alignment. The new operating levels are +10db and...

Our Price: $1,495.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# COL-SR71MKII
The SR7.1MKII gives precise level control with a 47 stepped attenuator for eight balanced audio signals. Fold down capabilites for stereo and mono and two 5.1 formats. Indiviual input mutes isolate surround speakers, L & R speaker mutes isolate the stereo fold down speakers. There are two internal switches, one for the mono fold down to be routed to either L & R or the center speaker and one which allows the LFE signal to be included in the stereo fold down so the SR7.1MKII could be used as a summing...

Our Price: $2,050.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List