-
Item# MIL-3742
The Miller 3742 CX8 Solo 75 2-stage (alloy) Tripod system combines with the innovative 1630 Solo Tripod and CX8 fluid head. An ideal Tripod system for cinematic and documentary, where the payload and centre of gravity changes frequently due to lens or accessories swapping.
CX8 is the premium head in the 75mm ball levelling CompassX series. Designed for camera rigs from 0kg to 12kg, with CB plus 16 balance positions and 5 levels of fluid drag, it sets the standard in professional compact...

Our Price: $2,495.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1580
The Sprinter II Tripod Series from Miller are all about speed without compromise...
Featuring Inline Carry Handles perfectly positioned to help you safely and comfortably carry your Sprinter II over long distances and Miller’s patented Sprinter II leg locks that enable you to set-up the tripod in seconds with more room for your fingers, also making it easier to operate the co-located side action levers - those are just a few of the professional conveniences Miller is known for...

Our Price: $1,350.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-993
The mid-level spreader design offer continuous variable adjustment between maximum and minimum height settings and assist the tripod in rapid setup and pull down by keeping the tripod legs at an equal or preset distance relative to each other.
Features:Provides infinite adjustments for the footprint of the tripod Top adjustment knob offers easy operation Latch and swivel design spreader attachment enable fast setups and prevents accidental damage Suits all Sprinter II and HD tripods
Features:...

Our Price: $626.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-475
Features: Suitable for all tripods with Mid Level Spreaders
Provide stable support for tripod
Always remain flat upon the location surface
Set of 3
Weight: 0.21 kg (0.5 lb)
Foot Dimensions: 82 x 53mm
Attachment: Rubber Stirrup

Our Price: $119.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-489
Quick release sliding camera plate with 60mm travel. Includes 1/4" & Pin Adaptor (493) and 1/4" & 3/8" screws. Suits DS20 fluid head.

-
Item# MIL-490
Quick release sliding camera plate with 60mm travel. Includes #493 adaptor carriage for attachment to MiniDV camcorders. Suits DS5 and DS10 fluid heads. Features: Quick Release Sliding Camera Plate with 60mm travel
Suits DS5 or DS10 fluid head
Includes #493 adaptor carriage for MiniDV camcorders

Our Price: $89.64
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1050
Robust support for Sport, Studio, EFP and Outside Broadcast
Skyline 70 fluid head provides robust, reliable and versatile 150mm ball levelling support for lighter weight sports, studio, EFP and outside broadcast productions. A new counterbalance system and quick release 120mm sliding plate offer easy balancing for wide payloads from 4.5 to 37.5 kg. An extended drag range from ultra light to heavy supplies true fluid action, soft take offs, smooth stops with no over runs plus...

Our Price: $7,821.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1060
The 1060 Camera Plate from Miller is a large Euro-style quick release sliding camera platform with 120mm travel compatible with the Skyline 70 Fluid Head. This product includes 2 x 3/8” screws for heavier camera payloads.
The broadcaster's choice, the Skyline 70, is a heavy duty performer that meets the demands of professional storytellers and comes with the reliability and “THE RIGHT FEEL” that are the hallmarks of every Miller Product. Constructed of lightweight,...

Our Price: $144.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1065
The 1065 ARRI Camera Plate from Miller is compatible with the Cineline 70 Fluid Head. This product includes 2x 3/8" screws.
The choice for the passionate creatives, the Cineline 70 brings a new dimension to professional camera support. Incorporating advanced precision fluid drag and counterbalance systems operated through rear mounted "all-in-one location" with unique illumination of all controls and bubble level, the Cineline 70 makes it even faster and easier...

Our Price: $331.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1070
The versatile Miller Arrowx 1 Fluid Head accommodates a wide payload range of 0 to 35.3 lb using 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero to support even the lightest cameras. This pro video head offers five steps each of pan and tilt drag plus zero and counterbalance with CBPlus for precise control. The side-load Euro plate has a 4.7" sliding range and features easy drop-in mounting without the alignment issues posed by rear-loading designs.
The...

-
Item# MIL-1090
The Miller CX2 is an exceptional ball levelling fluid head designed for "on the go" creative professionals needing a versatile and affordable solution with uncompromised performance. Whether you shoot with a mirrorless camera, DSLR, mid-sized cine-rig or an ENG camera, CX2 is capable of balancing payloads from 0kg to 8kg. It features advanced precision fluid drag, intuitive controls, and fast set-up.
The CX2 employs CB PlusTM technology providing 16 positions of counterbalance...

Our Price: $1,316.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1096
The Miller CX10 is a robust 100mm ball levelling fluid head designed for users needing the stability that comes with 100mm tripods, cost effectively. Whether the job requires a mirrorless camera, DSLR, cine-rig or a broadcast camera, the CX10 is capable of balancing from 0kg to 12kg. It features advanced precision fluid drag, fast set-up and professional performance.
CX10 employs CB Plus™ technology providing 16 positions of counterbalance and 5+0 levels of pan and tilt settings...

-
Item# MIL-1204
The 1204 Compass Camera Plate from Miller is a quick release sliding camera plate with 60mm travel to suit Compass 12/15 fluid heads.
The Compass 12 and 15 Fluid Heads are afforable, light and versatile for shooters on the go. Suitable for cameras and configurations payloads up to 10kg (22lbs). The advanced precision fluid drag and counterbalance systems operated by slim in line radial ring controls result in quicker and easier set up. The Compass...

-
Item# MIL-1208
The 1208 Mini Euro Camera Plate from Miller is a quick release sliding camera plate with 60mm travel to suit the Compass 20 Fluid Head.
The Compass 20 Fluid Head is a unique and adaptable compact 75mm fluid head suitable for cameras and configurations payloads up to 12kg (26.5lbs). The advanced precision fluid drag and counterbalance systems operated by slim in line radial ring controls result in quicker and easier set up.
With an extended 5+0...

Our Price: $69.72
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1209
Miller 1209 is a short sliding camera plate with 30mm (1.2") of travel to suit AIR, DS 10 & 20, Compass and Compassx fluid heads, designed for mirrorless cameras or large diameter lens. Comes with 1/4" and 3/8" screws.
Features: Quick release camera plate.
Comes with industry standard 1/4" and 3/8" screws for attachment.
Rubber camera support strips. Specifications: Weight: 0.08kg (0.18lbs)
Dimensions: 90 x 48.5 x 11mm (3.5 x 1.9 x 0.43")
Attachment:...

Our Price: $58.93
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1214
The 1214 Quick-Release Adaptor Plate from Miller is compatible with the Miller 311 Solopod. Featuring a quick release sliding camera plate with 70mm travel and 729mm width dimension for safe manoeuvrability.
The Miller Solo Pod extends the Solo Carbon Fiber range to feature a lightweight quality monopod for the Professional DV shooter. The ultra-stable precision made Solo Pod has a 3-Stage telescopic leg treated with the same comfortable neoprene grip well known...

Our Price: $203.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1223
The 1223 Front Box Adaptor from Miller is used to attach your assistant's box to the Cineline 70.
The choice for the passionate creatives, the Cineline 70 brings a new dimension to professional camera support. Incorporating advanced precision fluid drag and counterbalance systems operated through rear mounted "all in one location" with unique illumination of all controls and bubble level, the Cineline 70 makes it even faster and easier than ever before to set...

Our Price: $447.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1225
The 1225 Mitchell Base Adaptor with Clamp allows you to adapt the Skyline 70 Fluid Head to a Mitchell flat base tripods. Simply attach the Mitchell Base Adaptor to the Skyline 70 150 claw ball base using the 3 x socket cap screws supplied and you're set to go. The adaptor ocates easily into a flat base tripod with 3/8" location pin. There is also an adjustable 3/8" stud which will accommodate various tripod base sections. Features: Universal tripod fit, clamp has adjustable 3/8"...

Our Price: $436.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1230
The Miller 1230 Articulated Pan Handle with Extender for use with the Cineline and Skyline 70 Fluid Head is a multi-positional pan handle grip that ncludes 1234 pan handle short grip for dual control and a 1238 serrated handle clamp extender.
Features: Multi-positional pan handle grip
Includes 1234 pan handle short grip for dual control
Includes 1238 serrated handle clamp extender Specifications: Weight: 0.72 kg (1.6 lbs)
Length: 380 mm (15 in)

Our Price: $911.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1234
The Miller 1234 Short Grip Pan Handle for use with the Cineline and Skyline 70 Fluid Head has a comfortable rubber pan handle grip, durable high-strength black alloy tubing and the short grip makes for greater control. Features: Short grip for greater control
Durable high-strength black alloy tubing
Comfortable rubber pan handle grip Specifications: Weight: 0.39 kg (0.9 lbs)
Length: 210 mm (8.3 in)

Our Price: $217.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1238
The Miller 1238 Serrated Pan Handle/Clamp Extender for use with the Cineline and Skyline 70 Fluid Heads. Features include 50mm extension and 1/4" and 3/8" accessory screw holes. Features: 50mm extension
1/4” and 3/8” accessory screw holes Specifications: Weight: 0.12 kg (0.3 lbs)
Length: 55 mm (2.2 in)

Our Price: $327.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1255
The 1255 Mounting Block enables user to attach 3kg of accessories, such as external viewfinder to all CX and Compass fluid heads. Allows for 1/4" and 3/8" threads.
Features: To suit CX & Compass fluid heads.
Hi-strength black anodised alloy construction.
Specifications: Maximum Payload Capacity: 3kg (6.6lbs)
Weight: 0.13kg (0.29lbs)

-
Item# MIL-1511
The Solo-10 tripod system, comprised of the ultralight, ultra rigid carbon fiber Solo tripod with the versatile DS-10 75mm ball-leveling head with selectable counterbalance, is a complete, ready-to-go professional support system for camcorders with a payload of 5 to 10 lbs.
The DS-10 offers the same control features, fluid drag design and accessories as Miller's larger broadcast products. The result is lightweight support that delivers superior performance, with features like fully Variable Fluid...

Our Price: $1,651.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1514
The SOLO DV 20 offers incredible price-performance and ultra-light carbon support for 10lb XL-1 and 20lb DSR390 DVCAM payloads. Designed around the popular Miller DS20 with 'flick-of-a-switch' selectable counterbalance, SOLO DV 20 features a choice of 1/4" & pin or 1/4" & 3/8" screw mounts with sliding quick release mount for lens and battery changes. The SOLO DV 2-Stage Carbon tripod complements this lightweight, true fluid drag support for all DVCAMcorders Features: True fluid pan and tilt
SOLO...

Our Price: $1,827.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# MIL-1576
Miller 1576 Sprinter II 2-Stage Carbon Tripod
The new Sprinter II ENG tripod range features Miller Sprint-Loks- Dual, side-action leg locks that let you independently adjust both stages of a 2- stage tripod using one hand. Each tripod leg has two Sprint-Loks, co-located on the upper leg clamp. The result: high speed adjustment, no more bending down to adjust the lower tripod stage! Features: Lightweight and rigid tripod construction
Tripod models suits fine height adjustable...

Our Price: $1,783.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List