-
Item# VLD-PN-2
Pink noise generators supply a flat noise source as a test signal for sound systems. Model PN-2 is a rugged test instrument supplied in an ABS plastic case. The PN-2 is powered by a 9V battery which is turned on by the insertion of a 1/4 in connector to the pink noise output.
Our Price: $152.29
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# VLD-BE2
Specifications: Dimensions (HxWxD): 2.6 x 1.93 x 1.73"
Our Price: $79.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# VLD-DSP30B
For measurements that require a full audio spectrum analyzer VL Design offers the DSP30B intelligibility meter. The DSP30B has built in non-volatile Flash Memory with the capacity to store up to 100 measurements. You can accordingly store and recall STI or CIS measurements without the use of a computer.
The system is contained in a lightweight carry case and can be run on AC Power or internal batteries. Features: Full Function Stand Alone 1/3 Octave Audio Spectrum Analyzers
Measures RTA,...
Our Price: $2,499.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# VLD-MK8A
VL Design MK8A is an instrument quality microphone for use with VL Design models DSP30 Real Time Analyzers, X4 Multiplexer and SPL120R SPL Meter. In the field calibration adjustment provided.
Specifications: Cartridge Type: Omni-directional electret condenser
Sound Input: 123dB SPL maximum
XLR 3 Pin male
Pin(1): Ground
Pin(2): Hot
Pin(3): Neutral
Works with: 600 ohm balanced input
Frequency...
Our Price: $229.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# VLD-TEF04
The VL Design TEF04™ is a omni directional, 1/2" diameter, electret condenser microphone suitable for General Purpose acoustical measurements and Pro Audio applications where a free field omni pattern is specified. The TEF04 provides levels of accuracy that meet the frequency response specifications of our more expensive titanium diaphram TEF05A mics, while providing the ruggedness of a mylar diaphram for field use. The mic circuit has been designed to to operate on phantom voltages...
Our Price: $399.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# VLD-TEF25
The VL Design TEF25 USB Preamp combines the portability of a small USB Preamp with the accuracy of the traditional TEF20 analyzer, in an affordable package. The TEF25 comes with the SoundLab SLUPG1 Software Upgrade that lets you run all previously owned TEF20 programs: TDS, MLS, RTA, PEQ, PLR and SLX. Run the older Versions or step up to Version 6 modules! Available in Version 6 is the Post Processing Module, SLPPS60. Also included is the TEF Training Class 3-DVD Set that contains the topics...
Our Price: $1,999.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# VLD-TEFPRO
VL Design TEFPRO is a USB based pre-amplifier kit that includes the TEF25 USB preamp, TEF04 microphone, TEFCS carry case, MKCA20 audio cable, USB cable, SLUPG1/SLRTA60/SLTDS60 software, and TEFDVD TEF Class DVD.
The TEF Products measure, certify and calibrate; Loudspeaker phase, STI measurements, CIS measurements, PI measurements, Microphone polar diagrams, Loudspeaker polar diagrams, Waterfalls, Acoustic measurement, Real time, MLS, FST, RTA, THD, RT60, Reverberation time, Reverberation...
Our Price: $2,199.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# VLD-ZM-1P
The VL Design ZM1P measures the impedance of loudspeakers and entire distributed loudspeaker systems as well as individual components. It will also calculate the wattage that will be produced on an installed loudspeaker system. The ZM1P also has an Overload Protection Circuit that prevents the meter from being damaged from amplifier overloads up to 120 VAC and a Tone Generator to improve system testing and performance.
Power Requirements ZM1P - Eight "AA" Alkaline...
Our Price: $625.25
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# VLD-PN2W
The VL Design PN2W is a Pink/White Noise Generator providing continuous pink or white noise. White noise has an equal amount of energy per Hz of bandwidth. Pink noise has an equal amount of energy per octave of bandwidth.
Specifications: Output
Unbalanced RCA jack
Impedance 620 ohms
Output Level
Pink Noise: Continuous @62mV
White Noise: Continuous @62mV
Frequency Range
20Hz - 20kHz
Power Requirements...
Our Price: $194.19
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# VLD-PN2WA
The VL Design PN2WA Pink/White Noise Generator providing continuous pink or white noise. White noise has an equal amount of energy per Hz of bandwidth. The PN2W Pink noise has an equal amount of energy per octave of bandwidth.
Specifications: Output
Unbalanced RCA jack
Impedance 620 ohms
Output Level
Pink noise - Continuous @62mV
White noise - Continuous @62mV
Frequency Range
20Hz - 20kHz
Power Requirements
AC...
Our Price: $229.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# VLD-PN3C
The VL Design PN3C has a fixed and calibrated output level of -26 dBV. Its low output impedance allows it to drive both high and low input impedances without going out of regulation. It has a regulated and filtered power supply which can be supplied by an external AC adapter or a 9V battery. A power status Led indicates when lit that the battery is supplying adequate power. The PN3C turns on when a 1/4 inch phone plug is inserted in the output jack. There are no external controls.
Pink...
Our Price: $299.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
