Narrow Results:

• 

  Ward-Beck D6201B openGear Dual 1x4 AES/EBU Reclocking DA w/SRC - 75 Ohm

  The Ward-Beck D6201B is a dual 1 x 4 AES distribution amplifier designed for use in 75 Ohm, unbalanced installations. It can provide four copies of each incoming signal when used with a T6301A rear assembly. It may also be used as a 1 x 8 AES distribution amplifier with SRC to provide up to eight outputs that are sample rate converted. For high density applications when used with the T6401A up to twenty 1 x 4 AES DA's with SRC can be provided in a single two rack unit frame. The...

  

  Read More

  Item #: WARD-D6201B

  Availability: Direct Ship From Manufacturer

  Our Price: $375.00

  Add to Wishlist
• 

  Ward-Beck AV6201A openGear 1x8 Analog Video Distribution Amplifier

  The AV6201A is an analog video distribution amplifier with a differential input designed for broadcast use. It can provide up to eight outputs when used with a single card rear module, and up to four outputs when used with a double card rear module in an OG3-FR-C frame. The AV6201A can be addressed through Dashboard to report card status and activate features. The AV6201A is housed in the openGear OG3-FR-C series frames. Please note: Rear module required, T6301A (single card)...

  

  Read More

  Item #: WARD-AV6201A

  Availability: Extended Lead Time

  Our Price: $355.00

  Add to Wishlist
• 

  Ward-Beck T6301A Single Card 10 BNC Rear Module

  Ward-Beck T6301A openGear single card rear module with 10 BNC's. 1x8 Analog Video DA, DI, Clamp, EQ when used with AV6201A card ( required ). Features: Specifications:

  

  Read More

  Item #: WARD-T6301A

  Availability: Usually ships in 3-10 business days

  Our Price: $105.00

  Add to Wishlist
• 

  Ward-Beck M8245A Power Supply Module

  The M8245A power supply module offers switchmode power to the 8200 Series mainframes. The switchmode supplies operate on 115V/60Hz to 230V/50Hz without any special setup and require 130 VA maximum. The M8245A is CSA approved, runs with low noise, and is interchangable between frames. One power supply is required per frame. Two power supplies are required for redundancy. Features: Specifications:

  

  Read More

  Item #: WARD-M8245A

  Availability: Usually ships in 3-10 business days

  Our Price: $374.00

  Add to Wishlist
• 

  Ward Beck POD5 Dual Headset Amplifier w/Talkback Input

  POD5 is a dual stereo headset amplifier with a separate external talkback input. When activated, the external talkback is fed to the right ear while a mono sum of the stereo signal is fed to the left ear. Two 1?4 TRS headset jacks and level controls are located on the front panel. A screwdriver adjustment for talkback level is also provided. Connections to POD5 are via screw terminals located on the rear panel. Channels A and B have separate talkback control inputs. They can be controlled...

  

  Read More

  Item #: WARD-POD5

  Availability: Usually ships in 3-10 business days

  Our Price: $374.00

  Add to Wishlist
• 

  Ward Beck AMS16-2AM 16 Channel Audio Meter & Monitoring System with Dual 3G/HD/SD-SDI Embedded Audio Inputs 2RU

  The Ward-Beck AMS16-2AM is a 2 RU embedded audio monitor. Two inputs for 3G/HD/SD-SDI video with embedded audio are provided. Once a source selection is made, two reclocked copies of the selected source is also provided on the rear panel. The integral demuxer will extract all four groups of embedded audio (16 channels) and display these simultaneously on the sixteen LED bar-graph displays located on the front panel. An LED phase indicator is provided. Copies of the displayed signals...

  

  Read More

  Item #: WARD-AMS16-2AM

  Availability: Usually ships in 3-10 business days

  Our Price: $5,294.00

  Add to Wishlist
• 

  Ward Beck AMS2 Mini Cue Rackmount Stereo Audio Monitor Speaker with Digital & Analog Inputs

  The AMS2 is a high-quality, low-cost mini cue speaker with digital and analog inputs. The versatile AMS2 is packaged as a standard 1RU unit and is equipped with both digital and stereo analog inputs. Connections are via 3-pin XLR connectors located on the rear panel. An IEC power disconnect simplifies installation and removal of the device, especially in mobile applications. The AMS2 is perfect for use in studios, pro AV, mobile trucks and many environments, where quality is essential and space...

  

  Read More

  Item #: WARD-AMS2

  Availability: Usually ships in 3-10 business days

  Our Price: $628.40

  Add to Wishlist
• 

  Ward Beck AMS2-N Mini Cue Stereo Speaker With Digital and Ravenna AES67 Inputs

  Networked monitoring has never been more simple or cost effective! The versatile AMS2-N is packaged as a standard 1RU unit and is equipped with both Ravenna and Digital AES Inputs. Connections are via RJ45 for AES67 and 3-pin XLR for AES located on the rear panel. An AES output is provided for `In Line' AES installs, or where Ravenna to AES conversion is required. Quality, affordability and portability, in one neat package. AMS2-N is the Mini Cue Speaker for you, perfect for use...

  

  Read More

  Item #: WARD-AMS2-N

  Availability: Usually ships in 3-10 business days

  Our Price: $1,249.99

  Add to Wishlist
• 

  Ward-Beck AMS4 4-Channel Audio Monitoring System

  The AMS4 is a versatile audio monitoring system. This one RU high unit can be used to monitor analog audio, AES digital audio and SDI embedded audio. The SDI demuxer may be added as an option. The AMS4 features an 8 x 1 input switcher (four analog sources, four AES sources) with auto recognition of 75 or 110 Ohm AES signals. A direct balanced stereo analog audio output of the switcher is available on the rear panel. A ten segment LED stereo VU meter and phase indicator is included on the front...

  

  Read More

  Item #: WARD-AMS4

  Availability: Usually ships in 3-10 business days

  Our Price: $1,195.00

  Add to Wishlist
• 

  Ward-Beck AMS8-1AM Multichannel Audio Monitor -HD/SD-SDI Demuxer

  The AMS8-1AM is a compact one rack-unit aural and visual monitor designed to handle multi-channel format audio signals. Eight PPM/VU LED bargraphs display signal activity, while a sophisticated multi-speaker system allows operators to listen, with great clarity, to the signal being monitored. INPUTS The AMS8-1AM has four digital audio inputs. 110 Ohm balanced inputs are on 3-pin screw terminal pluggable connectors and 75 Ohm unbalanced inputs are on BNC connectors. An internal switcher allows the...

  

  Read More

  Item #: WARD-AMS8-1AM

  Availability: Usually ships in 3-10 business days

  Our Price: $4,275.00

  Add to Wishlist
• 

  Ward-Beck D8202 plus RM AES-EBU Digital-to-Analog Converter

  The Ward-Beck D8202+RM is an AES/EBU digital to analog audio converter in Ward-Beck's 8200 Series, and utilizes the latest in 24-bit conversion technology. On board cable equalization and data reclocking allow the unit to reliably recover the incoming digital signal. The D8202+RM can be programmed to provide three stereo analog outputs or two stereo and two mono sum (L+R) outputs. Lock, Confidence, No Lock and EQ LED indicators are all visible from the front edge of the card....

  

  Read More

  Item #: D8202-PLUS

  Availability: Usually ships in 3-10 business days

  Our Price: $339.00

  Add to Wishlist
• 

  Ward-Beck D6204A openGear AES/EBU Digital-to-Analog Audio Converter

  The Ward-Beck D6204A is an AES/EBU digital to analog audio converter designed for broadcast use. It provides digital to analog audio conversion along with AES/EBU signal distribution. When the D6204A is used in combination with a T6302A rear termination module it provides 4 reclocked copies of the AES/EBU input signal as well as 2 copies of converted analog output.The D6204A supports audio sampling frequencies from 30kHz to 192 kHz. It converts the incoming AES/EBU digital audio...

  

  Read More

  Item #: WARD-D6204A

  Availability: Usually ships in 3-10 business days

  Our Price: $395.00

  Add to Wishlist
• 

  Ward Beck POD13A Dual AES/EBU-to-Analog Audio Converter

  POD13A is a dual AES/EBU digital to analog audio converter. This has both 75 Ohm and 110 Ohm inputs included. The reclocking circuitry and selectable cable equalization in POD13A ensures that the incoming digital audio signal is recovered reliably. Front panel controls and tallies for each converter include an operating level selector, equalizer enable switch with LED indicator and LOCK and NO LOCK tallies. Connections to the unit are on the rear panel with AES/EBU inputs on pluggable terminal...

  

  Read More

  Item #: WARD-POD13A

  Availability: Usually ships in 3-10 business days

  Our Price: $634.00

  Add to Wishlist
• 

  Ward Beck POD14A Dual Analog-to-AES/EBU Digital Audio Converter

  The Ward-Beck POD14A is a dual AES/EBU analog to digital audio converter. This unit comes ready for use in both 75 and 110 Ohm installations. POD14A can generate digital audio signals at sampling rates of 32, 44.1, 48 and 96 kHz using its internal oscillator. Alternatively, the sampling rate of the digital output signals may be referenced to an external reference input. Front panel controls and tallies include a momentary step switch and LED indicators to cycle through the...

  

  Read More

  Item #: WARD-POD14A

  Availability: Usually ships in 3-10 business days

  Our Price: $724.00

  Add to Wishlist
• 

  Ward Beck POD14B Dual Analog to AES/EBU Digital Audio Converter

  POD14B is a dual AES/EBU analog to digital audio converter. This unit comes ready for use in 75 Ohm or 110 Ohm installations. POD14B can generate digital audio signals at sampling rates of 32, 44.1, 48, 96 and 192 kHz using its internal oscillator. Alternatively the sampling rate of the digital output signals may be referenced to an external source. Front panel controls and tallies include a power switch with LED tally, a momentary step switch and LED indicators to cycle through the internally...

  

  Read More

  Item #: WARD-POD14B

  Availability: Usually ships in 3-10 business days

  Our Price: $833.25

  Add to Wishlist
• 

  Ward-Beck openGear M6205A-3G HD/SD-SDI 3G Embedded Audio Processor

  The M6205A-3G is a sophisticated audio processing platform card designed for broadcast use. It can extract and process up to 16 channels of audio embedded in a digital video stream. The M6205A-3G accepts 3G, HD-SDI and SD-SDI signals. In addition, two AES inputs are provided to enable substitution of the embedded audio signals. The card may also be used as a one group embedder. Functions of the card include channel shuffling, channel replacement or substitution, and mixing. Several task specific...

  

  Read More

  Item #: WARD-M623G

  Availability: Usually ships in 3-10 business days

  Our Price: $1,795.00

  Add to Wishlist
• 

  Ward Beck M6205A-3G DownMix HD/SD-SDI 3G Embedded Audio Processor

  The M6205A-3G is a sophisticated audio processing platform card designed for broadcast use. It can extract and process up to 16 channels of audio embedded in a digital video stream. The M6205-3G accepts 3G, HD-SDI and SD-SDI signals. In addition two AES inputs are provided to enable substitution of the embedded audio signals. The card may also be used as a one group embedder. Functions of the card include channel shuffling, channel replacement or substitution, and mixing. NLC5.1 is a optional...

  

  Read More

  Item #: WARD-M623G-DM

  Availability: Usually ships in 3-10 business days

  Our Price: $3,995.00

  Add to Wishlist
• 

  Ward Beck M6205A-3G MultiMerge HD/SD-SDI 3G Embedded Audio Processor

  Supercharge your M6205A-3G! Functions of the card include channel shuffling, channel replacement or substitution, mixing all in embedded audio or AES, and by optioning the +MultiMerge for M6205A-3G one adds the the ability to upmix stereo to 5.1 and downmix 5.1 to stereo, all within one card. Combining DTS MultiMerge with Ward-Becks' M6205-3G gives broadcasters one powerhouse of an audio processor. The Perfect Blend of Stereo and Surround Sound for Your TV Broadcast Facility DTS Neural Surround...

  

  Read More

  Item #: WARD-M623G-MM

  Availability: Usually ships in 3-10 business days

  Our Price: $6,495.00

  Add to Wishlist
• 

  Ward Beck M6205A-3G NLC5.1 3G/HD DTS Neural Loudness Audio Processor

  The M6205A-3G +NLC5.1ST is a sophisticated audio processing platform card with optional processors designed for broadcast use. It can extract and process up to 16 channels of audio embedded in a digital video stream. The M6205-3G accepts 3G, HD-SDI and SD-SDI signals. In addition two AES inputs are provided to enable substitution of the embedded audio signals. The card may also be used as a one group embedder. Functions of the card include channel shuffling, channel replacement or substitution,...

  

  Read More

  Item #: WARD-M623G-NLC5

  Availability: Usually ships in 3-10 business days

  Our Price: $3,995.00

  Add to Wishlist
• 

  Ward Beck M6205A-3G w/UpMix 3G/HD DTS Neural Upmix Audio Processor

  The M6205A-3G +UpMix is a sophisticated audio processing platform card with optional processors designed for broadcast use. It can extract and process up to 16 channels of audio embedded in a digital video stream. The M6205-3G accepts 3G, HD-SDI and SD-SDI signals. In addition two AES inputs are provided to enable substitution of the embedded audio signals. The card may also be used as a one group embedder. Functions of the card include channel shuffling, channel replacement or substitution,...

  

  Read More

  Item #: WARD-M623G-UM

  Availability: Usually ships in 3-10 business days

  Our Price: $3,995.00

  Add to Wishlist
• 

  Ward Beck microMatch Standalone Balanced / Unbalanced Bi-Directional Converter

  The microMATCH stand-alone unbalanced to balanced converter is part of Ward-Beck's Micro series of small, affordable products designed to solve big signal handling headaches. microMatch converts a consumer stereo unbalanced audio pair to professional balanced line levels with proper termination. It also provides a separate balanced mono mix output. microMatch is professional level converter that is perfect for use in studios, pro AV, mobile trucks and other environments where quality...

  

  Read More

  Item #: WARD-MICROMATCH

  Availability: Usually ships in 3-10 business days

  Our Price: $125.00

  Add to Wishlist
• 

  Ward Beck POD1 Balanced / Unbalanced audio converter

  POD1 is a bi-directional audio interface providing the conversion of a stereo balanced signal to an unbalanced signal, and vice versa. POD1 allows the use of low cost consumer grade record/playback equipment in a professional environment through impedance matching and level control. Front panel trim controls let the user match, record, and playback levels of consumer equipment to the professional standards employed. Connections on the rear panel are female and male XLR3 type for the balanced inputs...

  

  Read More

  Item #: WARD-POD1

  Availability: Usually ships in 3-10 business days

  Our Price: $354.00

  Add to Wishlist
• 

  Ward Beck POD18 Quad Unbalanced/Balanced Converter

  POD18 is a 4 channel audio interface providing the conversion of 4 unbalanced signals to balanced signals. POD18 allows the use of low cost consumer grade record/playback equipment in a professional environment through impedance matching and level control. Front panel trim control lets the user match, record and playback levels of consumer equipment to the professional standards employed. Connections to POD18, on the rear panel, are made via XLR 3 type connectors for the balanced output, and RCA...

  

  Read More

  Item #: WARD-POD18

  Availability: Usually ships in 3-10 business days

  Our Price: $364.00

  Add to Wishlist
• 

  Ward-Beck openGear D6204A plus RM AES/EBU Digital-to-Analog Audio Converter w/Rear Terminal Module

  The Ward-Beck D6204A+RM comprises a D6204A AES/EBU digital to analog audio converter and T6302A rear module for 75 Ohm installations. It provides digital to analog audio conversion, along with AES/EBU signal distribution. When the D6204A is used in combination with a T6302A rear termination module, it provides 4 reclocked copies of the AES/EBU input signal as well as 2 copies of converted analog output. The D6204A supports audio sampling frequencies from 30kHz to 192 kHz. It...

  

  Read More

  Item #: WARD-D6204A-RM

  Availability: Usually ships in 3-10 business days

  Our Price: $479.00

  Add to Wishlist
• 

  Ward-Beck IMP-16F Impedance Transformer Panel - 16 XLR Female to BNC 1 RU

  Ward-Becks IMP-16F is a high density Rack Mount impedance converter panel, which allows 75 Ohm coaxial transmission of AES/EBU digital audio signals. The conversion transformer changes a balanced 110 Ohm signal on XLR to an unbalanced 75 Ohm signal on a BNC type connector. The IMP-16F is a conveniently packaged one rack unit high panel that features sixteen 3 pin female XLR connectors on one side and sixteen BNC coaxial type connectors on the opposite side.

  

  Read More

  Item #: WARD-IMP-16F

  Availability: Usually ships in 3-10 business days

  Our Price: $599.00

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends