Narrow Results:

• 

  Clearsonic IPTD IsoPac T

  IsoPac T consists of a 3-section clear shield in front, with SORBER baffles on the inside and as a lid. Cable cut-outs between each panel allow easy mic placement. The entire enclosure fits on a table and folds for easy transport. The IsoPac T uses a unique design to maximize space efficiency. The center section of acrylic is 24" W x 36" H. The side panels are 18"W x 34"H. The S3 SORBER baffle used as a lid rests on the side sections, and is held in place by the taller front section....

  

  Read More

  Item #: CLS-IPTD

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $387.39

  Add to Wishlist
• 

  Clearsonic A18-3 24 Inch High x 54 Inch Wide 3-section CSP

  Designed for guitar speaker cabinets, the A18-3 allows a player to drive the amp and speaker to the level needed to reach the overdrive "sweet spot", without projecting all of the volume forward.

  

  Read More

  Item #: CLS-A18-3

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $142.76

  Add to Wishlist
• 

  Clearsonic A2-4 2 ft. H x 4 ft. W - 4-Section CSP Section Acrylic Panel

  Each A2 panel is 1'W x 2'H. The most common arrangement of A2 panels is the A2-4, which consists of four sections. Designed for guitar speaker cabinets, the A2-4 allows a player to drive the amp and speaker to the level needed to reach the overdrive "sweet spot", without projecting all of the volume forward. Used with an S4-2, this system helps reduce stage volume and clean up stage sound without sacrificing your desired guitar tone.

  

  Read More

  Item #: CLS-A2-4

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $127.05

  Add to Wishlist
• 

  Clearsonic A5-7 Seven Section Drum Shield

  A5 panels are 2'W x 5.5'H each. A5 panels are the most common panels system used to isolate drums. Their height allows them to cover cymbals, and reduce more sound than the A4 panels. Shown here is an A5-7, 7-section system.

  

  Read More

  Item #: CLS-A5-7

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $916.03

  Add to Wishlist
• 

  Clearsonic AX2412x1 24 Inch Wide x 12 Inch High 1-Section Add-On Height Extender with H-Channel

  Clearsonic AX2412X1 Height Extenders add 12 inches of height to standard CSP systems. 'H' channel and hinge are included. The AX2412x1 is normally used as an add-on to increase the width of an existing AX2412 system by 24 inches. When it's time to break down, CSP systems with AX height extenders installed correctly will still fold 'accordion style' for easy storage. Features: Specifications: Dimensions: 24-inch wide x 12-inch high

  

  Read More

  Item #: CLS-AX2412X1

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $43.95

  Add to Wishlist
• 

  Clearsonic AX2412X4 12 Inch Height Extenders for 4-Section Shields

  AX2412 Height Extenders add 12 inches of height to standard CSP systems. `H' channel and hinge are included. The AX2412x4 is normally used to increase the height of an A2466x4 or A2448x4. When it's time to break down, CSP systems with AX height extenders installed correctly will still fold `accordion style' for easy storage. Features: Adds 12" To Standard Shields Clear Acrylic Construction Still Allows For Accordion-Style Folding Specifications: Sections:...

  

  Read More

  Item #: CLS-AX2412X4

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $130.07

  Add to Wishlist
• 

  ClearSonic BAR Standard 2 Section Aluminum Support Bar - 60 Inches - 96 Inches

  Standard 2-section Aluminum Support Bar, 60 inches to 96 inches. Features: Specifications:

  Read More

  Item #: CLS-BAR

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $34.00

  Add to Wishlist
• 

  Clearsonic BT4D 4 Ft. Bass Trap - Dark Gray

  ClearSonic Bass Traps are created by placing a 12W SORBER baffle in the corner, and then instaling a 24W SORBER baffle over top. This creates a large area of both absorption and air-gaps where bass waves are absorbed. The BassTrap 4 is 4' tall, and the BassTrap 5 is 5.5' tall. Hook & loop fastener is included. Features: Specifications:

  

  Read More

  Item #: CLS-BT4D

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $170.14

  Add to Wishlist
• 

  Clearsonic BT5D 5.5 Ft. Bass Trap - Dark Gray

  ClearSonic Bass Traps are created by placing a 12W SORBER baffle in the corner, and then instaling a 24W SORBER baffle over top. This creates a large area of both absorption and air-gaps where bass waves are absorbed. The BassTrap 4 is 4' tall, and the BassTrap 5 is 5.5' tall. Hook & loop fastener is included. Features: Specifications:

  

  Read More

  Item #: CLS-BT5D

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $177.65

  Add to Wishlist
• 

  Clearsonic C2 Zippered Case for Any A2 Panel System up to 7-Sections

  Protect your investment. These super strong zippered cases help keep your panels looking like new! Features: Great for transporting or storing your ClearSonic Panels. Each case will hold up to a 7-Panel system. These durable cases come with a one year warranty. Sewn in padded lining helps protect your panels. Comes with handles and a zippered pouch.

  

  Read More

  Item #: CLS-C2

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $132.37

  Add to Wishlist
• 

  Clearsonic C4 Zippered Case for any A4 Panel System Up to 7-Sections

  Protect your investment. These super strong zippered cases help keep your panels looking like new! Features: Great for transporting or storing your ClearSonic Panels. Each case will hold up to a 7-Panel system. These durable cases come with a one year warranty. Sewn in padded lining helps protect your panels. Comes with handles and a zippered pouch.

  

  Read More

  Item #: CLS-C4

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $158.55

  Add to Wishlist
• 

  Clearsonic C5 Zippered Case for Any A5 Panel System up to 7-Sections

  Protect your investment. These super strong zippered cases help keep your panels looking like new! Features: Great for transporting or storing your ClearSonic Panels. Each case will hold up to a 7-Panel system. These durable cases come with a one year warranty. Sewn in padded lining helps protect your panels. Comes with handles and a zippered pouch.

  

  Read More

  Item #: CLS-C5

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $185.15

  Add to Wishlist
• 

  Clearsonic CH12 Hard Shell Case for up to (7) AX12 Panels

  The CH5, CH4, CH18, and CH12 Hard Cases are made using .098" molded ABS plastic and feature plenty of foam padding, plywood reinforced end panels, stamped zinc-plated steel corners, aluminum angle brackets on the CH5, heavy nylon straps and an ample number of spring loaded cushioned handles for easy and comfortable transport. The CH12 hard case is 24 1/2" L x 12"W x 3"D and will hold up to (12) AX12 Height Extenders, or (3) A2-4 amp shields.

  

  Read More

  Item #: CLS-CH12

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $280.00

  Add to Wishlist
• 

  Clearsonic CH18 Hard Shell Case For AX18 Panels

  The CH18 hard case is 24 1/2" L x 18"W x 3"D and will hold up to (12) AX18 Height Extenders.

  

  Read More

  Item #: CLS-CH18

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $350.00

  Add to Wishlist
• 

  Clearsonic CH5 Hard Shell Case for up to 7 A5 Panels

  Protect your investment. These super strong zippered cases help keep your panels looking like new! Features: Great for transporting or storing your ClearSonic Panels. Each case will hold up to a 7-Panel system. These durable cases come with a one year warranty. Sewn in padded lining helps protect your panels. Comes with handles and a zippered pouch. Specifications: The CH5 hard case is 66"L x 24«"W x 3"D and will safely hold up to (7) sections of 5.5' tall acrylic (A5-7). The CH5 has...

  Read More

  Item #: CLS-CH5

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $791.00

  Add to Wishlist
• 

  ClearSonic CP Clear Pac includes Ammonia-free Acrylic Plastic Cleaner (Aerosol Can) / Microfiber Towel and Gloves - PPE

  The CP ClearPac includes a can of Sprayway Spray on Cleaner, Rainwipe Microfiber Towel, and Soft Jersey Gloves at one low price. Avoid costly fogging! Most CSP shields are manufactured out of standard acrylic which has a softer surface than glass or AR acrylic and therefore needs to be treated with extra care. Cleaning CSP with alcohol based cleaners like Windex and abrasive wipes like paper towels may "fog" (scratch) acrylic panels. Sprayway Glass Cleaner is safe on all plastics...

  

  Read More

  Item #: CLS-CP

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $17.32

  Add to Wishlist
• 

  Clearsonic IPBD IsoPac B Drum Isolation Booth

  IsoPac B is similar to IsoPac A in sound reduction, but is slightly smaller, and allows for the bass drum to be seen in the front. There are six ClearSonic panels with AX12 extenders in the front, and three S5-2 SORBER baffles in the rear. The acrylic panels are a total of 6.5' tall, and the S5-2 baffles are 5.5' tall, so there is a foot of open space around the rear of the booth allowing for air exchange. Specifications: Dimensions: 6' wide x 7' deep x 6.5' tall Amount of Sound Reduction:...

  Read More

  Item #: CLS-IPBD

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $2,055.54

  Add to Wishlist
• 

  Clearsonic IPD IsoPac D - Drum Isolation Booth

  6-feet wide x 6-feet deep x 4-feet tall IsoPac D Clearsonic IsoPac D(IPD) features a 4-feet tall A2448x5 CSP with (5) S2224 SORBER baffles attached to the inside lower portion of the acrylic. (2) S2444x2 baffles wrap around the rear. If you think that you might need to upgrade to an IsoPac with a Lid in the future, you may want to consider the IsoPac C instead. If you have any questions, please contact us to discuss your specific needs. Features: Specifications:...

  Read More

  Item #: CLS-IPD

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $1,128.83

  Add to Wishlist
• 

  Clearsonic IPJD IsoPac J Vocal and Instrument Isolation Booth

  IsoPac J is a 5' diameter vocal and instrument booth. This IsoPac works well for isolation of one or more vocalists. It also works great for acoustic guitar, string, woodwind, and brass instruments. Constructed in a similar style to our MegaPac, the IsoPac J uses a combination of clear panels and SORBER to achieve maximum sound reduction. This booth is often used for voice-over work, recording, and practice.

  

  Read More

  Item #: CLS-IPJD

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $2,151.39

  Add to Wishlist
• 

  Clearsonic IsoPac I - Voiceover/Translation Booth

  IsoPac I is designed to be used in translation, interpretation. and voice-over applications. This booth will fit one or two people seated comfortably at a table. Since height extenders are not included in these set-ups, the total headroom is 5 1/2 Ft. As with all ClearSonic panels, there is room for cables to pass through at the bottom of each acrylic section. These booths are easily customized to fit your specific size and sound reduction needs. Additional SORBER panels can be added to reduce...

  Read More

  Item #: CLS-ISOPAC-I

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $1,497.33

  Add to Wishlist
• 

  ClearSonic LITE2466-5 Five 24 Wide by 66 High by 3/16 Inch Thick Acrylic Panels

  The LITE2466-5 is constructed with five 24-in wide by 66-in high by 3/16-in thick acrylic panels and is preassembled with flexible hinges to fold flat for easy storage. Unlike our standard ClearSonic panels, these panels are unfinished "as-cut and square". Please note that this drum shield is thinner than our standard (1/4-in thick) panels and is NOT designed to support our height extenders and LidPac assemblies. We believe our standard A5-5 (while more expensive) is the better overall...

  

  Read More

  Item #: CLS-LITE2466-5

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $444.29

  Add to Wishlist
• 

  Clearsonic LP5-3D Three Section LidPac Drum Shield Top

  The ClearSonic LidPacs are designed to substantially reduce sound that would normally escape upwards. LidPacs are especially helpful in spaces with high ceilings. We made sure that many of the same great features that have made the ClearSonic Panels and SORBER famous can also be found in our LidPacs. LidPacs are portable, durable, cost effective, and simple to set up and take down. LidPac 5-3: (1) STC5, (2) STS5, (1) BAR - 5.5' deep x 6' wide, 3-section lid LidPac 5-4: (1) STC5, (1) STC512,...

  

  Read More

  Item #: CLS-LP5-3D

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $359.00

  Add to Wishlist
• 

  ClearSonic MegaPac 7x8x7 Sound Isolation Booth

  Amount of Sound Reduction: 70% The MegaPac is useful in applications where maximum isolation is needed. The MegaPac features 360° of ClearSonic Panels for maximum sound isolation. ClearSonic shields in the back means less opening for sound to escape. A full seven feet of interior headroom is achieved by using the AX18 Height Extenders. By adding the STC512 twelve inch wide SORBER Lid baffle to the standard 3-section lid, total lid coverage is 7'W x 5.5'D. The MegaPac includes two lid support...

  

  Read More

  Item #: CLS-MEGAPAC-D

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $3,765.09

  Add to Wishlist
• 

  ClearSonic Mini Mega Pac Sound Isolation Booth

  The Cleasonic Mini Mega Pac isolation package is a slightly smaller version of the MegaPac. With up to a 70% reduction in sound volume, the MMP Mini-MegaPac is a smaller version of the MP and is useful in applications where above average booth space and isolation is desired. This large booth features 360ø of CSP, all with 12-inch Height Extenders that provide 6.5-feet of headroom. Model MMP includes 98 square feet of SORBER sound absorption, a 72-inch wide x 66-inch deep SL7266...

  Read More

  Item #: CLS-MINIMEGAPAC

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $3,249.88

  Add to Wishlist
• 

  Clearsonic S2 24x22x1.5 Inch Sorber

  SORBER S1 and S2 baffles can be attached to the inside of the ClearSonic Panel to reduce the amount of reflected sound, or attached to a wall to improve acoustics in a room. The S1 and S2 are velcro-receptive and easily attached to almost any flat surface. The S1 is 16.25"H x 22"W, while the S2 is 24"H x 22"W. The 22" width allows the panels to fit the ClearSonic A3, A4, and A5 panel systems.

  

  2 Models Available

  Item #: CLS-S2

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $49.00

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends