-
Item# ART-SLA1
2 Models AvailableRobust yet compact power amplifier designed for studio and even live applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion. Specifications: 100 watts rms/channel @ 8 ohms (130 watts rms/channel @ 4 ohms and 260 Watts/Bridged Mono @ 8 ohms)
input impedance of 22k ohm unbalanced (44k ohm balanced)
XLR & 1.4in I/Os
Ground Lift Switch, Fan Cooled Design, Power, Clip, Signal and Protect LEDs
IU rack Space
Frequency...
Read More
Our Price: $239.99
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# ART-SLA4
Offering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.
The SLA-4 is a true four-channel amplifier in a single rack-space that can be switched easily from Multi-channel, Stereo and Bridged Mono Modes. Separate mode switches allow you to bridge channels 1 and 2, or channels 3 and 4, or both channel pairs. This maximizes...
Our Price: $399.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-CLEANBOXPRO
Provides two channels of unbalanced to balanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used.
One section of the CLEANBoxPro converts two channels of consumer-level unbalanced input signals into two channels of pro line-level balanced output signals. It...
-
Item# ART-HEADAMP6PRO
The ART HeadAmp6PRO is a six-channel stereo headphone amplifier that includes a six-channel auxiliary input section that can be used to provide the popular "More-Me" function on each headphone mix. Each output channel also features a dual function BALANCE control which will pan between LEFT & RIGHT sides of the main signal bus, or vary the MIX between the main signal bus and the AUXILIARY input for that respective channel.
Bass and treble controls are included on each output channel for fine-tuning...
Our Price: $279.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-MX622
The MX622 is a versatile mixer combining three balanced microphone or line level inputs with three stereo line inputs into a single stereo line level mix. Essential features include external effects loop (mono send with stereo return), independent stereo record outputs, stereo TRS 1/4-inch balanced outputs and full range master two-band equalizer. The internal power supply and single rack-space 19-inch rack mount format allows for easy installation and reliable long-term operation. Features: Three...
-
Item# ART-PB4X4PROUSB
Presenting the Art PB4x4PROUSB 4x4 PRO USB SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO USB SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO USB SERIES provide the surge protection you need to keep your rack safe from unwanted disruption.
All PRO USB SERIES models have an additional internal discrete module called APFT (Advanced Power Filtering)...
Our Price: $129.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-RP-1
For those seeking a single channel preamp to improve the performance of ribbon and dynamic microphones, the ART RP-1 Mic. This preamp brings out all of the nuances of a microphone before running into your recording interface or mixer through long cable runs.
With the RP-1 the user can tailor the loading on the mic through the variable impedance control. The low cut filter allows the removal of wind noise and plosive before adding additional gain. The discrete preamp circuitry inside is...
Our Price: $79.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-AVDIRECT
The AV Direct from ART is a multi-purpose tool that allows you to plug in virtually any sound source to an XLR input. The AV Direct is the ideal input solution for any application where stereo iPods, Laptop computers, consumer DVD players, consumer HiFi equipment, or video machines have to be connected to a single XLR microphone level input. Unlike standard gender bender cables or DI boxes, the AV Direct can accept virtually any input connection and output level (including amplified speaker outputs)...
Our Price: $69.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-HEADAMP4
The HeadAmp4 offers 1/8th-inch as well as 1/4-inch inputs and outputs as well as lower noise, lower distortion and more output in a new custom extruded stackable metal case.
Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source.
Individual level controls for the four headphone...
-
Item# ART-XCONNECT
The ART XConnect USB Microphone Cable provides an easy way to directly connect any dynamic microphone to your computer''s USB port for convenient recording without any extra equipment. The output of the XConnect is a studio quality 16-bit, 44.1 kHz or 48 kHz digital audio signal. No special drivers are required, just "plug and play" with your Windows PC or Mac.
Simply plug the XLR connector into your microphone and the USB connector into your computer. That''s all there is to it. The first time...
-
Item# TUBE-MP-POWER
Power Supply for ART TUBE MP Microphone Preamp
-
Item# ART-311XOVER
The 311 Crossover may be used as a stereo 2-way crossover network and has the addition of the subwoofer output for low-end frequency reinforcement. It employs 24dB / octave state-variable, Fourth-order Linkwitz-Riley filters that guarantee properly phased outputs at all frequencies which is optimal for the proper acoustic summing of common signals from adjacent drivers in the crossover region. Each channel features independent high and low output level controls and a crossover frequency rotary control...
Our Price: $149.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-341
3 Versions AvailableThe 341 Dual 15 Band and 351 Single 31 Band EQs feature XLR, TRS and RCA input and output connectors. Switchable boost/ cut range and constant-Q filtering is also standard. The ART-351 adds variable hi-pass and low-pass filtering to this impressive EQ line.
For the precision of a 1/3 octave EQ in a flexible stereo configuration, the ART-355 Dual 31 Band is your choice. Features: ART-341
Dual Channel 15-Band Graphic Equalizer
Constant-Q Filtering
Balanced XLR, Active Balanced...
Read More
Our Price: $149.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-C2
The ART C2 is one of the most versatile compact side-address wide diaphragm condenser microphones available. A cardioid polar pattern with two position pads and two position low frequency roll-off switches make it the ideal studio condenser microphone for solo vocal or instrument recordings where subtlety and clarity is paramount.
In live sound and remote recording applications, the C2's cardioid pattern offers excellent feedback rejection and better isolation and will give you the best results...
Our Price: $199.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-CLEANBOX-2
"Hum" in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called "ground loops". The safest way to eliminate unwanted noise is with the CleanBOX II. Some examples of Ground Loops:
-The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer's ground, then into a mixer's power...
Our Price: $69.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-COOLSWITCH
A-Y switching works two ways. It lets you switch a common source signal (guitar, bass or keyboard) between two amplifiers or amp channels. Or conversely, it lets you switch two source signals (ie, two different guitars) into the same amplifier. A good quality A-Y switcher will also provide LEDs or other indicators to show whether A, B or Y routing is in effect. The Y routing combines both the A and B outputs in parallel so that two amplifiers can be driven at once. The CoolSWITCH provides full...
Our Price: $59.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-DIGMPAII
The all new ART Digital MPA-II delivers all of the same great features of the ProMPA with the added versatility of digital output. Like the ProMPA-II, each input circuit has 48v phantom power and features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone. The Digital MPA-II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals.
...
Our Price: $549.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-DJPRE2
The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry...
Our Price: $65.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-DMPA-II
ART Digital's MPA-II delivers all of the same great features of the ProMPA with the added versatility of digital output. Like the ProMPA-II, each input circuit has 48v phantom power and features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone. The Digital MPA-II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals.
The...
Our Price: $549.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-DPDB
The new dPDBT Passive Direct Box features two high-quality direct boxes in one portable enclosure. It is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs.
It also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. The dPDBT features switchable Input Attenuation (0 dB, -20dB, -40dB), a 50k ohm Instrument...
Our Price: $65.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-DRP
The ART Dual RP Mic Preamp is the ideal solution for increasing the performance of your ribbon and dynamic microphones. This two-channel preamp brings out all of the nuances of your mic before running into your recording interface or mixer via long cable runs.
With the Dual RP you can tailor the loading on the mic through the variable impedance controls. The discrete preamp circuitry inside is designed for low noise and transparent operation. The balanced output drives long cable runs...
Our Price: $99.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ART-DTI
The DTI is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds,thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and canhandle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources.The transformers are wound...
-
Item# ART-DUALXDIRECT
The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via "combo" jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a...
-
Item# ART-HEADAMP4PRO
The ART HeadAmp4Pro could be the most fully featured ultra compact headphone amplifier in its price point on the market today.
Packing as many features as possible into the small format chassis, the HeadAmp4Pro has five stereo headphone outs, each with their own volume control. A separate footswitchable XLR input (with phantom power) allows instant talkback to any one, or all of the connected headphones. Input matrix allows the listener to audition any or all auxiliary inputs for maximum...
-
Item# ART-HVA1
2 Channels AvailableThe ART HVA Series 1 is a class-D installation amplifiers. It is suitable for both 70/100V line installations (selectable through dip-switches). Each channel has its own gain control and LED indicators (signal, clip and protection). The input and output connections are made through Euroblock connectors. The amplifiers are a 1U rack 19-inch size is very appropriate for many types of installations, taking advantage of its multichannel design.
HVA1/HVA4 has a variable speed internal cooling...
Read More
Our Price: $399.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
