Channel Plus

The Channel Plus Model 2512 DC & IR Passing 2-way Splitter/Combiner is a bi-directional splitter providing a 1 GHz bandwidth and is ideal for antenna and coaxial cable operations. The splitter/combiner can be used for two applications. It can be used to split a signal from a source or combine signals from multiple sources onto one coax run - essentially a two in one out antenna combiner. Use a DC passing splitter whenever DC IR signals are present on the coax. Features: 1 GHz bandwidth 3.5...

Channel Plus 2506-10 6dB In-line Attenuator (10-Pack)

The LPF-750 Low-pass Filter is used on systems when broadband entertainment feed is supplied by a CATV service. The filter removes all CATV channels above the pass band, allowing insertion of locally-generated ChannelPlus modulated channels. In addition, the filter removes cable system noise which degrades the picture quality of the locally-generated channels. Features: 0 to 750 MHz bandpass frequency Passes off-air TV channels 2 to 60 Passes CATV channels 2 to 116 Allows insertion of TV channels...

The Model NF-469 Notch Filter couples the incoming signal source coax cable to the input on a splitter or bi-directional DA-series amplifier. Once installed, the NF-469 filters out channels to make room for modulated channels. In addition, the NF-469 blocks the modulated signals from being broadcast back into the coax. The NF-469 is a perfect solution for modulation in the ever-increasing bandwidth taken up by Cable Television. The Model NF-469 Notch Filter blocks incoming cable TV channels 64-70...

6-way (H806) and 8-way (H808) balanced splitter 5-1000 MHz -130 dB RFI rejection Vertical alignment