-
Item# CON-AES-LFH60XLR
The NTP CON-AES-LFH60-XLR is an AES3 Break Out Cable (LFHSUB/LRS) - 2 Meters Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# CON-D25XLRFAUDIO
The NTP CON-D25-XLR-F-AUDIO is a DSUB to XLR Tascam Analog In Cable
Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# CON-D25XLRMAUDIO
The NTP CON-D25-XLR-M-AUDIO is a DSUB to XLR Tascam Analogue Out Cable Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# CON-OPT-LC-SC-2M
The NTP CON-OPT-LC/SC-2M is an Optical Multi Mode Fiber Cable - 62.5 / 125 - 2 Meters Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# CONAESD25XLRTASC
The NTP CON-AES-D25-XLR-TASC is an AES3 Break Out Cable (DSUB/XLR) - 3 Meters
Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# CONAESLFH602DB25
The NTP CON-AES-LFH60-2DB25 is an AES3 Break Out Cable (LFHSUB/2DB25) - 0.5 Meters Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# CONBNCHD-STD0-5M
The NTP CON-BNC-HD/STD-0,5M is an HD-BNC to BNC Adapter Cable Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-CARD-2MADI
The NTP CARD-2MADI is a Dual MADI I/O Card with 2 x 64 Channels, Built in Sample Rate Conversions on Input, Choice of Physical Interface; SFP / Coax or Optial, MM or SM, Redundant Mode, Auto Switch-over in case of signal loss
Features: 2 x MADI I/O
2 x 64 channels
8 cards = 1024 channels
Built-in Sample Rate Converter on input
Choice of physical interface
Select type of SFP module
Optical, MM or SM
Coax
Redundant mode
Auto switch-over in case of signal loss Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-CARD-2SDI
The NTP CARD-SDI is a 2 x SDI Embedder/de-embedder, - 16 channels pr. SDI,16 SDI Embedder/de-embedder, Supports SD, HD and 3G SDI, Built-in Sample Rate Converter, and Routing of single channel Features: 2 x SDI Embedder/de-embedder
16 channels pr. SDI
8 cards = 16 SDI Embedder/de-embedder
Supports SD, HD and 3G SDI
Built-in Sample Rate Converter
Routing of single channels Specifications: General:
Signal type compliance: Serial digital video acc. to SMPTE
Formats: SD: 292M,...

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-CARD-8AES
The NTP CARD-AES8 is an 8 x AES I/O with 16 channels in and out, Built-in Sample Rate Converter on input, Sample rates from 44.1 to 192 kHz Features: 8 x AES I/O
16 channels in and out
8 cards = 128 channels in and out
Built-in Sample Rate Converter on input
Sample rates from 44.1 to 192 kHz Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-CARD-DA8
The NTP CARD-DA8 is an 8 Channel Digital to Analog (DA) Output Card with LINE output, Selectable max. Output level, +9 dBu to +24 dBu in steps of 0.1 dB Features: 8 ch. LINE output
Selectable max. Output level
+9 dBu to +24 dBu in steps of 0.1 dB
Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-CARD-L8
The NTP CARD-L8 is an 8 Channel Line In only Analog to Digital Input Card with Phantom Power, Mic Pre Gain, Phase Invert and Selectable Max. Line Input Level. Features: 8 ch. LINE input
8 ch. MIC/LINE input
Phantom power
Mic pre gain
Phase invert
Selectable max. line input level
+9 dBu to +30 dBu in steps of 0.1 dBLong Product Description (150 words or less): AD conversion for the DAD and Penta module product lines. Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-CARD-M8
The NTP CARD-M8 is an 8 Channel Switchable Line/Mic Preamps Analog to Digital Input Card with Phantom Power, Mic Pre Gain, Phase Invert and Selectable Max. Line Input Level.
Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-CARD-SPQ
The NTP CARD-SPQ system consist of a DSP card that you can install in one of the 8 card slots of AX32. The SPQ Speaker Processor System is extremely flexible and you can match it to any speaker configuration, including immersive audio formats such as Dolby Atmos.
Management of the controls is handled via the DADman control software, where you can configure processing for all output channels in the defined monitor profile – also on cue signals. Processing can be applied for room tuning, bass...

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-CARDDANTE128
The NTP CARD-DANTE128 is a 128 Channel of Dante I/O, Built in Sample rate Conversion I/O, Dante/AES67 Network, Enables connections between Network and different sample rates
AX32R already support 64 channels of Dante IP Audio via an optional module, but in an effort to meet demand for an even higher channel count, our an optional expansion card adds another 128 channels to your digital audio-routing matrix.
Further, with eight slots available for expansion cards, you could ultimately have...

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-LIC-CARD-M8
The NTP LIC-CARD-M8 is an 8 Channel Mic Pre License for Line AD Cards. Features: Specifications:

-
Item# NTP-MOD-DANTE
The NTP MOD-DANTE is a 64 Channel IP Audio Bi-Directional Module with support for AES67 / DDM Network delay setting up to 41 msec. Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-MOD-MADI2SFP
The NTP MOD-MADI-2SFP is a 2 x MADI I/O, 2 x 64 Channels Dual SFP with Built in Sample Rate Conversions on Input, Choise of Physical Interface; SFP / Coax or Optial, MM or SM, Redundant Mode, Hot link, mode, Auto Switch-over in cae of signal loss 2 x 128 Channels. No SFP Modules. Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-MOD-SFP-COAX
The NTP MOD-SFP-COAX is a Coax MADI Transceiver SFP with HD/Mini BNC
Features: Specifications:

-
Item# NTP-MOD-SFP850LZ
The NTP MOD-SFP-850-LZ is a multi mode optical transceiver SFP with 850nm and low output laser. Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-MODSFP1300LD
The NTP MOD-SFP-1300-LD is a multi mode optical transceiver SFP with 1300nm and low output laser. Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-MODSFP1300LZ
The NTP MOD-SFP-1300-LZ is an optical transceiver single/multi mode SFP with 1300 nm Laser Features: Specifications:

Availability: Direct Ship from manufacturer, contact us for availability
Item Details
-
Item# NTP-MON-LIC
The NTP Technology MON-LIC EUCON Monitor Control License option enables the AX32 AD/DA Converter and digital matrix, as well as the DX32 Digital audio interface and matrix, to operate as an audio signal processor providing high-resolution signal summing and low latency routing of monitor signals. AX32 has as well an option for speaker correction EQ and bass management.
The monitor control is managed via the DADman 5.2 software application, which has support for the EUCON 3 control protocol,...
